Windows Support Forum

Exchange server for home use: help?

Q: Exchange server for home use: help?

Hi I recently aquired a Dell poweredge c box onto which I ve had server and exchange installed I ve for home use: help? server Exchange been quoted to have the box installed on my home network but I m running out of budget so I d like to have a crack at it myself and hopefully pick up some knowledge along the way I have a simple ish home network - most of which is either wireless or wired through the mains power network The Dell server has NIC but I have another I can install - I m told I need I m at a loss as to know where to start ie how to plug it all in and from then how to configure it all I m told the server needs to sit in the DMZ this true Exchange server for home use: help? If so should I fit it with AV software recommendations here please Also the box is noisey and might therefore live in the garage and need to be accessed remotely from another terminal in the house This possible Could I get away with cabling the server into the modem router via the mains electricity route or better still via a wireless router I have sat upstairs in a cupboard What would be really useful is if someone who has carried out a similar installation can offer advice tips pitfalls etc Also if I could be pointed in the direction of some kind of Exchange home-user for complete s guide that too would be very useful nbsp

Relevancy 100%
Preferred Solution: Exchange server for home use: help?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Exchange server for home use: help?

First, go to Dell and download ALL the available drivers for that model Service Tag. They also have pretty decent setup instructions.
This system is not all that different from what you are used to... so do not be intimidated with it because it is "new" to you. Simply start out slowly, and become comfortable with how it works... add and remove as needed, but slowly. Don't add the second NIC until you know why it is needed.
The noise is caused by a high speed, rugged power supply that is designed to run 24 hours without interruption. You can replace that power supply with a quieter model that will work just as well, but may not have the 3-year long life of the current one. But yes, it is often useful to have another terminal at your desk IF you can control the dust and heat in the garage.
You will likely need more instruction than can be posted here, but there are plenty of good ideas available with a Google search.
Your thinking on this project is very good, however.
One thing I would do is call Dell support, and ask them to send you a copy of the install disk that came with that model. It will have the latest service packs. But all other drivers will only be available via download.

http://www.techspot.com/community/topics/exchange-server-for-home-use-help.150150/
Relevancy 71.38%

I have 3 computers and an Android phone. I would like all to update across my network and on the road. I'm using Office 2000 and 2003...would setting up my own exchange server enable this to happen?

A:Home exchange server - will this work?

Any suggestions?

http://www.sevenforums.com/network-sharing/353938-home-exchange-server-will-work.html
Relevancy 70.52%

Hi,

Is it possible to use exchange to pull in web based emails (aol, hotmail) and then deliver those to outlook clients on my home network. I do not use a domain (use peer to peer) but could do if required.

Any help greatly appreciated.

EDIT - I would like these emails to be treated like regular pop3 emails, i.e not having the usual IMA in Outlook trappings such as deleted emails appearing with a line through etc...
 

A:Help with exchange Server on Home Network and IMAP

To cut a long story about Domain Controllers, Catalogue Servers, Active Directory, DNS, WINS, Windows Server edition, IIS.... short.

The answer is No.

Think of this:

If Mr A sends an email ([email protected]) to Mr B ([email protected])

The mail goes to HOTMAIL.COM and is authenticated at Hotmails email server. Not yours.

How could it possibly go to your mail server when hotmail have the domain (domain as in Domain Controllers/Networking/AD - not web domain) name hotmail.com ?

Exactly, it cant.

You should just configure POP forwarding from your chosen web based email to Outlook and stop all this nonsense about Exchange for a Home Network.
 

http://www.techspot.com/community/topics/help-with-exchange-server-on-home-network-and-imap.46544/
Relevancy 70.09%

Hello everyone,

I am setting up a home computer lab from scratch using a single server with windows server 2008 r2, I am planning to use this to set up exchange server 2010 and an office communications server 2007 r2. I was wondering if anyone had any tips hints and comments about this. I am primarily looking for instructions or a guide to make the set up process easier current the only decent source I have is :

http://www.msexchange.org/articles_...fice-communications-server-2007-r2-part1.html

beyond this I was wondering what I need to set up.

Here is basically what I want to set up:

office communicator features
exchange server features
online exchange server access

The purpose of this is purely for fun/educational purposes really, the kick here is if I manage to get this working over a hamachi network, but before all that I just need to set these features up.
 

https://forums.techguy.org/threads/home-lab-exchange-server-office-communications-serve.943880/
Relevancy 70.09%

OK so first Help home / server network with exchange question basic of all I m a noob to this stuff so please Help with basic exchange server / home network question bear with Help with basic exchange server / home network question me Here is what I m wondering I just opened an office for my new business This office will have an always-on cable internet connection We intend to have one central computer on which we do all of our production work herein referred to as quot The Office Computer quot We my business partner and myself will also be carrying laptops around with us all computers will be on Vista We would really like to be able to have an email server on The Office Computer that we can access on our laptops when we are away from the office Potentially we would also like to be able to get emails immediately from our SmartPhones or maybe Blackberrys Is there a reasonable way to do this Can a regular desktop be used as a server AND as a work station I ve read up a little bit on Microsoft Exchange Server and it seems like overkill I also see a lot of offers from various companies to host my exchange server but the monthly fees seem excessive I know there are ways that you can connect to a computer remotely but that isn t really what I m trying to do It s mostly about email and perhaps some file-sharing Any thoughts would be greatly appreciated If you can even point me in the direction of some good resource material I m not opposed to reading it and educating myself Thanks in advance nbsp

A:Help with basic exchange server / home network question

You probably don't want the security headache of hosting an e-mail server locally. You can go through g-mail and one of their hosting services and set up a domain and accomplish everything you are after without the security headaches.

If you want to setup and in house mail server you need and IDS system running on your network and be able to understand what it is telling you. If you have a mail server it will get hacked and you need to know when and what to do about it.

As for the file sharing install a VPN router to get remote access to your network.
 

https://forums.techguy.org/threads/help-with-basic-exchange-server-home-network-question.819585/
Relevancy 58.48%

Can anyone help me with setting up 515E up 2004 Setting ISA Exchange in Server Server 2003 front and of Pix this network layout with my Pix Firewall Network Layout Pix gt DMZ gt ISA Server gt Exchange Server Users Pix outside IP Address Pix inside IP Address DMZ IP Addresss ISA Server outside IP ISA Server inside IP I ve identified the interfaces IP Address and named all plus the following config global outside interface nat inside nat dmz conduit permit icmp any any route outside I can now access the internet from my ISA Server in the DMZ zone I Setting up Pix 515E in front of ISA Server 2004 and Exchange Server 2003 am intending to put the ISA Server out on the DMZ to access the outside world with static dmz outside netmask and then open all traffic to ISA with access-list acl out permit ip any host any access-group acl out in interface outside then I ll give ISA server access to the inside network with access-list acl dmz permit tcp eq access-group acl dmz in interface dmz With the above commands the first access-list acl out was not accepted by pix plus the second access-list acl dmz so if you could please share some light upon my configurations Regards Semisi nbsp

A:Setting up Pix 515E in front of ISA Server 2004 and Exchange Server 2003

Here, I scrapped your config. NAT bad/static bad/conduit bad/access-list bad.

no fixup protocol smtp
nameif int xxx outside security 0
nameif int xxx inside security 100
nameif int xxx dmz security 80
icmp permit any outside echo-reply
icmp permit any outside unreachable
icmp permit any inside
icmp permit any dmz
global (outside) 1 int
nat (inside) 1 172.17.0.0 255.255.0.0 32768 16483
route outside 0.0.0.0 0.0.0.0 65.77.78.1 1
static (inside,dmz) 172.17.0.0 172.17.0.0 255.255.0.0
static (dmz,outside) 172.18.0.2 65.77.78.48 netmask 255.255.255.255 << Can't have same IP as interface**
access-list internet permit tcp any host 65.77.78.48 eq 80
access-list internet permit tcp any host 65.77.78.48 eq 443
access-list internet permit tcp any host 65.77.78.48 eq 25
access-list internet permit icmp any any eq echo
access-list internet permit icmp any any eq echo-reply
access-list internet permit icmp any any eq unreachable
access-list internet permit icmp any any eq source-quench
access-group internet in interface outside
access-list dmz permit ip host 172.18.0.2 any << *Read note 1
access-group dmz in interface dmz
access-list inside permit ip any any
access-group inside in interface inside

The above config will nat 172.18.0.2 to 65.77.78.48. You can't static NAT an entire IP to the same as a global (your interface). You can only do this if you NAT specific ports.

The above config will allow internet to reach 65.77.78.48 via TCP 80/443/25. I can only assume you're using ISA for EFE server, and maybe proxy. (Not an ISA fan)

The above config allows your ISA server carte-blanche access. In essence, it's a DMZ by name only. Don't fool yourself.

Don't use conduits, they're deprecated.

Don't use a firewall to permit "any" to your ISA server, actually use it to block inbound ports.

Also, your ISA server shouldn't/can't have two NIC's in the same subnet. That's a bad idea on 10 different levels. IF you're using your ISA server (blech) as EFE / reverse proxy for OWA, and outbound proxy - you might as well keep it on the same subnet as your Exchange server (inside, I'm assuming.) Again, 10 different reasons why it's a flawed security plan.

If this is simply an EFE server or reverse proxy, make sure you don't keep the ISA server part of any AD domain, stick it in the DMZ, and restrict what hosts it's allowed to see on the network that you're trying to protect.

Regards.
 

https://forums.techguy.org/threads/setting-up-pix-515e-in-front-of-isa-server-2004-and-exchange-server-2003.563885/
Relevancy 56.33%

Hello everyone:

I am not sure if this is the right place to post this or not but I thought I would try.

We have an Exchange server running Windows Server 2000 and we Blackberry Enterprise Server running on a seperate server. We are getting ready to upgrade our Exchange server to Windows Server 2003 and have run into a snag with a test user we created. We created the new account on our old server and then moved the users mailbox to the new exchange server. When we did that the BES recognizes that the user has moved servers but it doesn't send or recieve messages to the handheld.

Any ideas on what the problem might be?
 

https://forums.techguy.org/threads/exchange-server-and-blackberry-enterprise-server.699216/
Relevancy 56.33%

is there a way i can get a list with all the users login time, log off time, and all the info?
 

Relevancy 54.61%

We are looking at bringing in a new server that will run windows NT 2000. The current server is running windows NT 4.0. Can we transfer the exchange server and information for Outlook over to the new server. What is the best option for the Exchange Server?
 

https://forums.techguy.org/threads/exchange-server-transferred-to-a-new-server.29483/
Relevancy 52.89%

A recent cumulative update for Exchange 2016 was intended to add support for Windows Server 2016. But, after numerous reported issues, Microsoft has acknowledged a problem exists.

According to the release notes?

If you attempt to run Microsoft Exchange 2016 CU3 on Windows Server 2016, you will experience errors in the IIS host process W3WP.exe. There is no workaround at this time. You should postpone deployment of Exchange 2016 CU3 on Windows Server 2016 until a supported fix is available.

Once again, Microsoft?s testing of its own patches seems to have taken a backseat to accelerated release deadlines.
 

https://hardforum.com/threads/avoid-running-exchange-server-2016-on-windows-server-2016-for-now.1916406/
Relevancy 52.46%

Hi Guys

Here is my problem, normally at work i can view my email using MS Outlook or i can use a web browser (I use IE). As of late i cannot access my mail using the web browser. The page is not coming up properly, sometimes it comes up with hyper links.

At the office we use an exchange server for our email. Dont know whats the problem, is there any solution.

A:Exchange Server

is anyone else having this problem? if not it's not networked. does ms outlook still work? if so i'd say the problems somewhere in your browser!

http://www.techsupportforum.com/forums/f10/exchange-server-626434.html
Relevancy 52.46%

Ok guys here i go again. I need to setup Exchange IM server so i have gone through the full installation and configuration process i have installed the IM server, i have changed the exchange tasks in AD but when i try to connect to it i get error messages saying the service in temperary unavailable. Does anyone have any ideas as this is driving me crazy.

Thanx
Mick
 

A:Exchange IM Server

Hiya

I've moved you to Networking for more response

eddie
 

https://forums.techguy.org/threads/exchange-im-server.527877/
Relevancy 52.46%

Hello all,
Is there an easy way to tell if I am using MS Exchange server for my companies mail service? To make a long story short my boss has asked me to see if I could set up for him to share his calendar but apparently we must be using the above service. We are using Office '97 with Outlook '97 as our email application.

TIA,
Bill.
 

A:MS Exchange server?

Most obvious way would be to check what is running on the server, otherwise check your settings in outlook and see if you receive/send mail from pop3/smtp or if Exchange Server is listed.
 

https://forums.techguy.org/threads/ms-exchange-server.137931/
Relevancy 52.46%

When trying to open MS Exchange Server the following message appears: : “Your Microsoft Exchange Server is unavailable.”
Any recommendations?

A:MS Exchange Server

This error is a bit trickier to resolve only because there can be many different causes. No data connection – test your SMTP connection using telnet. If you are unsure how to do this, there is a good program: Exchange Server Fix Toolbox https://www.fixtoolbox.com/exchangeserverfix.html

http://en.community.dell.com/support-forums/software-os/f/3524/t/19680221
Relevancy 52.46%

hey i had some questions if anyone can help

1. Should we use exchange server on the same server were using to host the company POS or main program? This is a SBS 2003 so exchange came installed.

2. Can exchange support multiple accounts not user but mailbox ex: test.com, test2.com

3. what hardware should a server that will host 4 different mailboxes have. Such as ram, cpu

thanks
 

A:Exchange Server?

Personally I say:

Yes
Yes
Minimum requirements: http://technet.microsoft.com/en-us/library/aa996719.aspx
(scroll down to HardWare)
I'm quoting 2007 but oh well, about the same
 

http://www.techspot.com/community/topics/exchange-server.105023/
Relevancy 52.46%

I need to know if it is possible to access my ISP email address through Exchange over the web.

I can check my ISP email address with Outlook...can I do the same with Exchange???
 

A:Exchange Server OWA

No, but you can set up your email client to download your messages. It will only download it if they are set up as a forwarder on their servers to yours.
 

https://forums.techguy.org/threads/exchange-server-owa.440653/
Relevancy 52.46%

l want to add new backup of my exchange server to external source after creating the remote agents it gives a comunnication error. Help
 

A:Exchange server

External source as in off-site backup? Is there a firewall on the network?
 

https://forums.techguy.org/threads/exchange-server.677947/
Relevancy 52.46%

Does anybody have any useful suggestions as to why I can configure Exchange Server to collect and deliver mail for one internet mail server but if I use the same dial-up but change the mail server details I cannot do either??? Can someone please tell me where to start looking???
 

https://forums.techguy.org/threads/exchange-server-5.30012/
Relevancy 52.46%

We were running 5 Windows 2000 computers on a Peer-to-Peer Network Group. Recently, we installed Windows NT Server and Exchange Server 5.0 on another computer so that we could share our calendars in Outlook. Now that we have NT and Exchange installed, we need to know how to move our calendars in Outlook to the Server computer. Any help would be great! Thank you!
 

A:Exchange Server 5.0

Do you have the users now connected to Exchange? If so, you should be able to open the local PST files containing the local calendars then drag the local calendars to a public folder (which would be on the Exchange Server).
 

https://forums.techguy.org/threads/exchange-server-5-0.29950/
Relevancy 52.46%

HI,
A client has asked me to give them a quote to set up an exchange server and five client computers. Four of the desktops have windows xp home. The network they have was not planned it was an accident. LoL Anyways I am thinking of building the server myself and have built my own server. I used SBS 2003 standard. They also want to implement Outlook business contacts manager. I think their business will quickly need more licenses for the server. Do you have any hardware suggestions and and pricing guildlines to quote them with? Do they need winxp pro on all the desktops? They mostly would like to use outlooks exchange and calendar features. I would want there to be a mirrored raid but am unsure how big the hard drives should be. I have done fine with two 80 gig hard drives. Any ideas would be appreciated.
Jerry
 

Relevancy 52.46%

WHEN I SEND AN EMAIL TO A CERTAIN ADDRESS FROM A CLIENT PC THROUGH EXCHANGE SERVER
IT HANGS ON TO THEM AND WILL NOT FORWARD THEM TO OUR ISP, IT ONLY HAPPENS WITH CERTAIN ADDRESSES, THEY CAN SEND TO MY MAILBOX BUT IT WONT FORWARD MY REPLIES

 

Relevancy 52.46%

Hi,

I'm trying to find a solution to sync all of my outlook data (calendars, tasks etc) between my main comp, htc and eee pc running windows.

I have the chance to use a full exchange server 2007 or 2010 license. They are legitimate copies.

How easy would this be to set up at home?

Any help is appreciated.

Thanks.
 

http://www.techspot.com/community/topics/exchange-server.148511/
Relevancy 52.46%

I Work For A Government Building, And Our Building Uses Microsoft Exchange Server 2003. I Was Wondering, If The Exchange Server Logs All Emails That It Sends And Receives, Or Does The Server Just Send / Receive Message And Have No Record Of The Email?

A:Help With Exchange Server

Hi milzee.Nearly every business under the sun these days logs employee e-mail. You work in a government building, bet on it!To answer your question, yes. (see below)Exchange 2003 - Message Tracking Center

http://www.bleepingcomputer.com/forums/t/49218/help-with-exchange-server/
Relevancy 52.46%

Not sure if this is the right place... but I was reading up on microsoft exchange server.

What I want to know is that if I have this running on a windows server 2003 machine would this mean that I would be able to run my own e-mails...

I think I would have to get a Domain Name to get the .com at the end. But if I were to be rich someday and sheel out the money would this mean that I could run an e-mail host for me and my friends kinda thing...

A:Exchange Server

It sure does.

Not that I would be bright enough to walk you through it or anything, but you definitely could create your own email domain.

http://www.bleepingcomputer.com/forums/t/49326/exchange-server/
Relevancy 52.46%

Does anyone know how to configure excange server so that it doesnt have a maximum size for sending mail. (or maybe increase the maximum size). I'd appriciate it if anyone knows.
 

A:Exchange Server

I believe the maximum by default is 10MB. The limits are in Exchange System Manager under protocols SMTP, properties.
 

https://forums.techguy.org/threads/exchange-server.469631/
Relevancy 52.03%

I have recently inheritage our company server Which is a pretty hefty machineDell Poweredge16gb Ramdual ProcessersTerra Byte HDsVM Warewindows server 20003Exchange 2007 I have been ok to date except I cannot add a new user mailbox in Exchange, I get the message>>> "An Exchange 2007 server on which an address list service is active cannot be found " I have tried a variety of suggestion but still at a dead end any thoghts

Tom OBrien
 

Relevancy 52.03%

Hi, I currently host a dedicated Exchange server at www.esecuredata.com, and I have no issues with it, but I am looking to host a backup server at a second data center and have the two server replicate either multimaster or master-slave with the esecuredata server being the master and the new server being a slave. I have two questions:

1. What software would I need to implement to have the new backup server automatically update itself from the master server?

2. Can anyone recommend a good dedicated exchange server provider for my proposed backup server? Ideally it would be outside North America for redundancy. I can spend up to $100/month.

Thanks in advance.
 

https://forums.techguy.org/threads/backup-exchange-server.468697/
Relevancy 52.03%

I have installed Exchange 5.5 on a windows 2000 Server machine and would like to find some resources on how to setup mail accounts, could someone steer me in the right direction? I have Outlook 2000 setup on my LAN and have no problems setting up users using Outlook, But when it comes to Exchange I have very little knowledge.
 

https://forums.techguy.org/threads/exchange-5-5-2000-server.159671/
Relevancy 52.03%

Dear All,

I'm hoping someone can answer or comment on this:

If I said our (Netgear) ADSL Router 'forwards' (IP Port Forwarding) our email to the Exchange Server's IP address, would that make sence?

What would happen if we then ditched the ADSL Router? We're moving into a new office which has the Internet already set up for us to use.
How would the mail know where the Exchange Server is? - Or will it just all fall into place?

Thanks for your help.
Ben
 

A:Moving Exchange Server

Hi, Ben. I reworded your question title...
 

https://forums.techguy.org/threads/moving-exchange-server.268876/
Relevancy 52.03%

I am running the consumer preview.
Created a new user for the Windows Live Login capability, but now cannot get outlook to see the exchange server.
Likewise Outlook is not able to connect to Hotmail - error message saying the connection was interupted.

Have uninstalled Office and Reinstalled.
Deleted Profiles and started from zero for outlook - still nothong
The Exchange sever can be pinged from this machine

Any idea are helpful.

A:Outlook Can't see Exchange Server

I used the outlook included with Windows Live Essentials. Works for me using Windows 8 CP.
Windows Live Essentials - Download free Microsoft programs

http://www.eightforums.com/network-sharing/4675-outlook-cant-see-exchange-server.html
Relevancy 52.03%

Hi everyone,
I need some help with finding a program that will back up exchange but keep it running at the same time!
I have found 1 or 2 that can do it but if you could find some free versions or for a price what would be great.
It will be a big task to do it because they have over 16 GB of exchange and rising fast!!!

Any help would be great thanks Jason
 

A:Exchange Server Back-up

You really aren't going to find any that are FREE and do a good job of backing up individual mailboxes and databases while they are live. You need to ask yourself how much this email is worth to you and what would the effect be on you if they were suddenly gone and unrecoverable. If the answer is "they are worth nothing" then you can use the built in ntbackup utility to back it up. It the answer is "I would be devestated" you need to spend the money to get something like Veritas, BrightStor or other with Exchange connectors. 16GB is a lot of data to lose.
 

https://forums.techguy.org/threads/exchange-server-back-up.469216/
Relevancy 52.03%

I have installed Win2003 SBS. How do I get Exchange to work? I have done the "Internet and E-mail" setup under Server Management, but still do not appear to have user mail boxes, and cannot confirm names when I set up Outlook. Is there a place where MS explains how to set up the Exchange server on Win2003 SBS? I have tried checked their site, but get really lost. Any help will be deeply appreciated. Thanks.
 

https://forums.techguy.org/threads/exchange-server-on-win2003-sbs.391226/
Relevancy 52.03%

Our exchange server is working fine for some but not all users. I have rebooted the server and then some of the machines that were having problems and it seemed to fix the problem for a few minutes and then it goes back to asking for a password to connect. any help or suggestions would be appreciated. my email is working fine.
 

https://forums.techguy.org/threads/exchange-server-working-for-some-but-not-all.1070460/
Relevancy 52.03%

Anybody know how to do a search on Active Directory or Exchange for all accounts that have mail forwarding set up?

I would like to turn mail forwarding, auto replies, and Out of Office responses off, but first I would like to find all accounts that are sending such stuff.
 

https://forums.techguy.org/threads/searching-exchange-server-ad.429448/
Relevancy 52.03%

Not sure if I should post this here or in the XP forum, but here goes...

In attempting to fix an issue I had with OREANS32.SYS in my c:\windows\system32\drivers folder on a Win2K3 server, I renamed the file, then created a new 0-byte text file called OREANS32.SYS in the same directory.

Adjusted the pagefile to move it to the D: drive, (which is faster), and upon reboot, I can login to the server, map drives, view an internal website that is hosted on this server, but I can no longer RDP into the server, or open Outlook on my local machine (which connects to this server for Exchange mail).

I have gone back and undone my OREANS32.SYS changes, rebooted, but still getting the same issues.

Any idea what's going on and how to fix it?
 

A:Can't access exchange server or RDP

OREANS32.SYS on google comes back as an infection, could be one of many... I assume you've already followed this route? If you have an infection, renaming the file isn't going fix the problem...

I'm making the assumption that you're running 2003 SBS if you have everything in one. Are you running enterprise antivirus for your exchange or just a client covering the pc? What errors are in your logs? Can any machines connect to the exchange server?

Check your services, are all necessary exchange services running?
 

https://forums.techguy.org/threads/cant-access-exchange-server-or-rdp.508445/
Relevancy 52.03%

Hi,

My director use MAC and we had several issues in the past MAC not sync with exchange server. Is there any software he can use on MAC and compatible for MS Exchange?

He is getting an error on his mailbox saying inbox is full. I have made him to log in to a windows machine and he deleted his old email and deleted items.

Any suggestions?

Regards,
Dippy
 

https://forums.techguy.org/threads/microsoft-exchange-server-and-mac.1081573/
Relevancy 52.03%

We are on a network.A computer has just been set for a new user.The account has already been put on the exchange server.However, anyone using this computer can click on to outlook 98 and get into the program.Typically,when a user who is not registered to that computer can log on. However, if they try to click onto outlook.Access is denied. Anyone who logs on to this computer can also access the outlook e-mail program? I don't know anything about exchange. Any suggestions you might have would behelpful.
 

A:{Solved} - Exchange Server

Normally when you set up a new user on exchange and log onto a machine you will have two error messages

"Network problems are preventing connection to the Microsoft exchange server computer.contact your system administrator if this condition persist"

and then

"the Action could not be completed"

If you go into the control panel and open "mail/Mail & fax" and then "properties"
and enter the correct name for the server & mailbox and then hit the "check name" box it should underline the user,you should then be able to access the mail.

I hope this is what you needed!

Regards

James
 

https://forums.techguy.org/threads/solved-exchange-server.29643/
Relevancy 52.03%

I have a customer who wants to go Mac based and use a Hosted Exchange platform for email. (Fasthosts)
I have set this up on PC based networks no bother but I gather there are some issue with doing this Mac based.
His current set up is all PC. MS Office etc.  I appreciate one is Apple and One is Microsoft but information as to the issues / pitfalls is patchy.
Just wondered if anyone had done it and what their experience was.
 
Thanks in advance.

A:Hosted Exchange Server and Mac

What kind of email client will they be using on the Mac? If the hosted Exchange offers Outlook Web Access, they can access their email from a browser and there shouldn't be any issues.
 
There are Mac versions of Outlook as well, which will probably work better with Exchange than the native Apple Mail application, although that should work as well. http://support.apple.com/en-us/HT3748
 
If they're going to use some other client like Thunderbird, then make sure the hosted Exchange has IMAP and/or POP enabled -- on Exchange, those aren't by default. They'll also need to install an add-on if they want to use all the Exchange features that aren't available in IMAP or POP.

http://www.bleepingcomputer.com/forums/t/555996/hosted-exchange-server-and-mac/
Relevancy 52.03%

Good day Candy amp co Exchange Problem Server Today my Exchange server slowed down immensely due to the inetinfo exe process using up ALL the memory The CPU usage is minimal but the Exchange Server Problem available physical memory goes down to about Mb If I end the process which is in actual fact IIS it stops and starts the relevant services and it only uses about Mb of memory Then it climbs within seconds up to in excess of Mb I ve rooted the issue to my Default SMTP virtual server - if I stop this it returns to normal As soon as I start it the same thing happens I ve read up and it seems like its pointing to a virus doing this but my Trend Neat Suite shows no viruses even after updating manually both pattern and DCS and running cleanups across the network and on the servers ANY HELP - I cannot start the SMTP virtual server and no-one in my organisation can access their mail URGENT Any advice thoughts welcome nbsp

A:Exchange Server Problem

Hi Ron Wow, I can't help at all, but, I've put out an APB to all mods and admin to see if they might be able to.....in any event, it's been great chatting with you via email to solve your log in problem
 

https://forums.techguy.org/threads/exchange-server-problem.593645/
Relevancy 52.03%

My boss wants our exchange server to be able to send and receive internet mail, up until now it was internal mail only - does any one know any walkthroughs or tips sites?

Or could any one help me - I understand I need to have a domain pointed at our exchange server but its confuddling - =oS

Thanks
 

https://forums.techguy.org/threads/exchange-server-2003.451514/
Relevancy 52.03%

The office is running Windows 2000 server and MS Exchange server with approx. 6 machines connected. When anybody in the office e-mails, the recipient is getting a different looking e-mail address than the one it is coming from. For example, if [email protected] sends an e-mail the recipient sees the e-mail coming from [email protected]. When the recipient tries to reply to the e-mail they get a "non-deliverable" message. What could be the cause of this and why would it be happening to everybody in the office at the same time? Thanks.
 

A:MS Exchange server issue

Look at your user settings in Active Directory. Generally, email accounts are the same as the user name unless you set it up manually or set up a policy that creates email accounts in the format you mentioned.
 

https://forums.techguy.org/threads/ms-exchange-server-issue.451883/
Relevancy 52.03%

Ok I m trying to setup an Exchange Server using the book quot Mastering Exchange Server quot Well I m at the quot forestprep stage quot and it gives me this message when I try to do it quot The Component quot Microsoft Exchange Forest Preperation quot cannot be assigned the action quot ForestPrep quot because - To install the first Exchange server in a domain or to run setup in quot Forestprep quot mode you must first be an Exchange Full Administrator at the organization level You must use an account that has Setup Exchange Server Help been granted the Full Exchange Administrator role on the exchange organization using the Exchange Administrative Delegation Wizard quot So I assume that I must add quot administrator quot to this quot exchange full administrator quot group role using that Delegation Wizard Only problem is how do I install the delegation wizard as if I try to install Exchange from the CD I get the same message Please advise nbsp

Relevancy 52.03%

I cannot get any Terminal server clients to connect to our Exchange Server.
We run Terminal Server on a Windows 2000 server and are using Exchange 5.5 and Outlook 2000.
When I log into terminal server and try to setup a user profile I get an error "The name could not be resolved. The microsoft exchange address book was unable to log on to the Microsoft Exchange Server computer. Contact your system administrator if the problem persists.
I am able to ping the Exchange Server by the IP address.

Any idea?

Thanks

Jill
 

A:Terminal Server and Exchange

I have a feeling that its going to be something to do with Active Directory, and Users and Groups. Does the user whose profile you are trying to set up already have a user account in both the W2K domain and on the Exchange server?

This article offers a fix for a very similar problem, without really explaining why the fix is necessary.
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q255843

If you can't get Terminal Server to work, have you considered setting up Outlook Web Access, as this is really easy to configure and demonstrate to your users?
 

https://forums.techguy.org/threads/terminal-server-and-exchange.77762/
Relevancy 52.03%

Perhaps someone could enlighten me on atvantages and disatvantages of using a hosted exchange server. My reason for looking at this is we run a company with 3 offices in different parts of the state - we could benefit from sharing calendar & contacts as well as file sharing through this network - am I understanding this correctly? Someone please shed some light on this for me...

Thanks,

Brandon
 

Relevancy 52.03%

I'm completely stuck. I have never set up Outlook Web Access (OWA) on an Exchange server before, and now the boss is asking me to do it. Apparently a consultant who began setting up our network started the process of configuring OWA, but I'm unsure exactly where he left off. I was hoping there was someone out there who has done this before that could kind of walk me through it. We are running a Windows 2000 server with Exchange 5.5. The OWA component of Exchange is installed, but obviously not configured properly.

Ok...here's a dumb question...do I need to publish the OWA web files to a web server? Where do I find these files?
 

Relevancy 52.03%

I didnt know what Exchange Server and Outlook other section to post this in so my apologies if this needs to be Outlook and Exchange Server moved I have a work email available through an exchange server via my mobile device Using these exact same settings I am unable to setup that email with Microsoft Outlook Express on my Win XP Pro computer I am Outlook and Exchange Server assuming it is security settings on my companies side When I try to setup the account from home using the same settings as my phone I receive an error quot Outlook could not log on Check to make sure you are connected to the network and are using the proper server and mailbox name Network problems are preventing connection to the Microsoft Server computer quot Is there an application that will emulate a mobile device so I am able to use outlook with my work email from home I did download Microsoft's Windows Mobile emulator which is an emulated smartphone I can access email though that but I want to be able to use outlook

Relevancy 52.03%

I have Exchange 2000 running on a old computer. I need to change the computer. Does any body know what is the best way to move exchange to a new server?

Daniel
 

A:Moving Exchange to a different server

Sorry i dhould have posted this in the Business Applications forum
 

https://forums.techguy.org/threads/moving-exchange-to-a-different-server.72573/
Relevancy 52.03%

How do you configure MS Exchange Server to download mail from a single POP server?

I sm running MS Exchange Server 6.0.

If someone can not help step by step, could they please provide a details website that shows how to do it.

Thanks for all your help.
 

https://forums.techguy.org/threads/configuring-ms-exchange-server.216493/
Relevancy 52.03%

I'm moving an mailbox from a Microsoft 2000 server using Microsoft Exchange 5.5. to another server with the same versions. I moved almost everyone except for a few that are still on the old server. One problem I had was with this one user who is on our VPN and trying to set up his OUtlook. It says that the server is not accessible. This happened to th other users I set up before when Outlook was open while the mailbox was being moved. I would just update and refresh the Exchange Manager and Outlook on the client would be ok. For some reason, I think OUtlook is still looking for the old server instead of the new one that's why it can't connect. I'm trying to move it back to the old server now then back to the new one. Any help would be appreciated.
 

Relevancy 52.03%

I use MS Office2000 professional and MS Back Office and am having trouble on a small, 5 computer network, sharing things like my calendar and contacts. Every so often, when I reboot, and go to File, then Share, Sharing is greyed out and therefore unavailable. The only fix I have happened upon is to use "detect and repair" and insert the Office2000 disk and wait about 10 minutes while it does whatever it does. When I reboot, it's fixed. This is getting tiring. Any ideas?
 

https://forums.techguy.org/threads/sharing-using-ms-exchange-server.29919/
Relevancy 52.03%

Please can some one help me,

i started to receive this error ini the morning in the events log:

since this error i have had to disable all spam filters as every mail is gettin rejected as its had a scl rating of above 9. the highest level you can set is 9. not sure how i have to rectify this

Event Type: Warning
Event Source: MSExchangeTransport
Event Category: SmtpReceive
Event ID: 1022
Date: 10/07/2008
Time: 20:18:37
User: N/A
Computer: SCEXCHSVR
Description:
Anti-spam agents are enabled, but the list of internal SMTP servers is empty. If there are any MTAs between this server and the Internet, populate this list by using the Set-TransportConfig cmdlet in the Exchange Management Shell.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
 

https://forums.techguy.org/threads/exchange-server-2007.729290/
Relevancy 52.03%

I have just recently deployed a new exchange server 2003 on a domain controller running Windows Server 2003 Standard Edition R2. Everything was working well until I setup the VPN server. Now clients have to open and close Outlook several times before it will connect them to the exchange server. It will eventually allow them to connect to the exchange server it is just cumbersome to have to open Outlook 3-5, sometimes 7 times before it will connect to exchange. The DHCP and DNS are working fine, there are no errors reported about them in the event log, but I can't seem to resolve this issue. This just started happening after the VPN server was setup. Any help or tips you can provide would be greatly appreciated. Thanks.
 

A:Exchange Server 2003

delete the VPN support and reboot the server. If the problem goes away,
then the VPN code is buggie -- call the vendor!
 

http://www.techspot.com/community/topics/exchange-server-2003.68473/
Relevancy 52.03%

Are there any open source, free or very affordable alternatives to Microsoft Exchange Server? Maybe something web-based so I can just throw it up on my web space host?
 

A:Personal Exchange Server

Try Bynariís Insight server & webclient. Their webclient works with Outlook and provides sharing of calendars, contacts, and folders. Their server can be used for hosting.

www.bynari.net
 

https://forums.techguy.org/threads/personal-exchange-server.574583/
Relevancy 52.03%

My company is running Exchange server 5.5 and it seems that whenever our employees try to email specific customers, the message either fails completely or they get partial messages. I talked with the Network admin at the customers company and they say that it is only with us that this issue occurs. We have only 3 customers that this happens to and the rest work fine. Our exchange server is pretty much all defaults and they seem to be universal values, nothing fancy. Any suggestions?
 

A:Exchange server issues!

What do the addresses that fail have in common? Are they web mail cusomers, do they use Lotus Notes or CC Mail? I would check you Internet Mail Connector and see if it is set up correctly and also find out if Exchange is using the least cost route to send mail. We had a problem where the mail was taking too many hops before it's final destination and the mail would never reach the intended mail server. If you are using DNS to route mail make sure the remote host is registered on the DNS server or it will not go out.
 

https://forums.techguy.org/threads/exchange-server-issues.83081/
Relevancy 52.03%

Is it possible to see a log of all messages in the server to see if spam was being bounced off of me ? It has happened before. A user states that her email is taking forever (15 minutes to an hour to reach her inbox) why is this ?
 

https://forums.techguy.org/threads/spam-with-exchange-5-5-server.112102/
Relevancy 52.03%

My wife works at home one day a week and is connected to her office via a VPN connection. When using Outlook at home, the emails she downloaded at the office are not available and when at work, the emails she downloaded at home are not available on her office PC. Is there a setting in Outlook (2007) to force the server to keep the emails available at both locations? Thanks in advance!
 

Relevancy 52.03%

My current set up is one computer that have a proxy server, exchange server and a database server.
I setup a old computer to become my communications server, i set up the proxy server in there. My problem is i don't want to move the exchange server to the new comm. server. How do i tell exchange to use the proxy server to connect to the internet?
 

A:Exchange Server and Proxy

Greetings

As far as I know, you install the Proxy Client on the Exchange server. Then, when your Internet Connector attempts to make a connection to the internet, it will go through the proxy server.

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Every morning is the dawn of a new error...
 

https://forums.techguy.org/threads/exchange-server-and-proxy.28525/
Relevancy 52.03%

Hey everyone I hope someone can help me on this thing I m a bit of a fledgling to Exchange Server I have some experience in the setup and database repairing eseutil is a pain in the I have a bit of a scenario that I can t seem to get an answer on from one of my exchange sources and wanted to post it here and see if I can get a hand Here s what we have server 2000 Exchange My company is divided into two divisions The parent company holds the company s e-mail server in house they are right next door to us so access to the main mail server is not a problem Despite the split of divisions we all use the same e-mail address naming scheme example bob com In our office I have set up an exchange server of our own to receive the mail to pull the Exchange 2000 server mail from the main server for only our division example email protected is set up on the main server and I want to be able to have our exchange server pull down her e-mail only to ours We are on seperate networks and Exchange 2000 server the domain names for the two servers are different mail server is mail bob com and my server is mail bob oem local There seems to be some connectivity problems between the two servers and I cannot seem to be able to get the mail from the main server to our server Any ideas Thanks Brian nbsp

A:Exchange 2000 server

Are you using AD? Is there a trust between the two domains? Do both email servers live in the same domain? What prompted setting up a second email server strickly for one company's email?

Ultimately, what are you trying to do with your email? I don't think a second server is required for what you need (if my assumptions are correct)....
 

https://forums.techguy.org/threads/exchange-2000-server.412723/
Relevancy 52.03%

im running outlook 2000,, when connecting to exchange server..it locks up just about every time... i can use the exchange email client and it works fine... is there any know problems with outlook and exchange... please help
thanks
sd
 

A:outlook with exchange server

Does this happen with all Outlook 2000 clients on this Exchange server, or is this just a problem on some clients? Have you talked to the Exchange server administrators?
 

https://forums.techguy.org/threads/outlook-with-exchange-server.50751/
Relevancy 52.03%

I have the really strange issue. i currently have an exchange server 2007 on our production environment.
Last week something changed and all incoming emails were being rejected. the SCL rating were beyound that max level. i had to remove filttering due to this issue.

I somehow via powershell change the ip for the smtp server. I know have mail coming through however its not the same and emails from hotmail.com and yahoo.com get rejected.

Im not sure how i changed the smtp address via power shell. i want to know how i can get incoming mail coming through via a trusted smtp so that it doesnt give the emails high SCL rating.

Thanks
 

https://forums.techguy.org/threads/ms-exchange-server-2007.733440/
Relevancy 52.03%

We're running Exchange Server 5.5 (SP4) under Windows NT 4 (SP6a). We had a catastrophic failure of the boot drive and the backup was unusable, so I reinstalled NT and Exchange Server (new userid's, Exchange site and mailboxes). We have the 10-user license version of Exchange. When all was reinstalled, we only had 3 of the 10 licenses available with no trace of the other 7. How do I get the other 7 licenses back? Would greatly appreciate any help.

\//\//./\\/\\.
 

https://forums.techguy.org/threads/exchange-server-5-5-licenses-gone.157426/
Relevancy 52.03%

I have Outlook. It was configured through a MS exchange server. I want to configure Outlook for my ATT mail and disable the other e-mail. If I do this will I lose any saved e-mails? When I have chosen remove the excahnge server from the e-mail account it asks to set-up a new folder, so I'm not sure.

Thanks

A:Unconfigure Ms Exchange Server?

Your old emails should stay where they are, and all of your filters will apply to the new address too.

http://www.bleepingcomputer.com/forums/t/133353/unconfigure-ms-exchange-server/
Relevancy 51.6%

It looks like someone has hacked into our system and is sending out a huge amount of emails. I can see, in Exchange Systems Manager, about 5,000 emails in queue. My question is how do I delete or remove these emails? We are a small company so I know we are not sending out that many emails. Also, I can see the sender and it is not someone internally.
 

https://forums.techguy.org/threads/exchange-server-2003-problem.688134/
Relevancy 51.6%

I have just loaded Outlook 2003. All my POP e-mail accounts work fine. My problem is with the exchange server. We have an old server running Microsoft Server 4.0. Outlook 2003 tries to send all my in-house e-mail as a pop account.

Does anyone have any suggestions?

Thanks,

Farhomer
 

https://forums.techguy.org/threads/outlook-2003-exchange-server.198319/
Relevancy 51.6%

i hope im posting this in the correct place... 1. i know if you delete email through ms outlook client that email is delete but is kept by the exchange server for a certain number of days as set by the admin... correct 2. if i move an email from the inbox to a personal folder that i set up on the outlook client...is it taken off the server completely or is a copy of the email kept on the server... and if i decide to delete the email or even the folder... is that kept by exchange or is kept on the hard drive the outlook client is on.... thanks for any info... any further info about delete emails securely from an outlook client that is run by the exchange server would also be appreciated.
sd
 

https://forums.techguy.org/threads/deleted-mail-in-exchange-server.906419/
Relevancy 51.6%

I have set up an Exchange 2010 server on Windows Server 2008 R2. When running the Outlook Connectivity Test at https://testconnectivity.microsoft.com, everything appears OK except for the last stage:
 



Attempting to ping the MAPI Mail Store endpoint with identity: mail.[domain].com:6001.

 

The attempt to ping the endpoint failed.

 

 Tell me more about this issue and how to resolve it

 




Additional Details

 

The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
Elapsed Time: 5037 ms.


 
I have checked the firewall on the server and port 6001 is open. I have tried awarding port 6001 to the server from the router. still no improvement. I am somewhat new to the exchange server scene so the tech net link above didn't make an awful lot of sense. 
 
what else can cause this sort of error?
 
Thanks

http://www.bleepingcomputer.com/forums/t/561898/exchange-2010-rpc-server-unavailable/
Relevancy 51.6%

I'm getting this message when opening a users account (as administrator) in exchange.

Microsoft Exchange Administrator
Access denied trying to contact Windows NT domain controller.
Microsoft Exchange Administrator
ID no: c1031029

Recently ran some MS patches and update antivirus (eTrust) on this box. Also getting an "access denied" when trying to end processes (eTrust are the ones I tried).

It's like I'm not getting authenticated as an administrator or something (I can start and stop services?). I'm looking at various security settings and stuff but nothing is looking like an obvious solution.

Any help (like a guess) would be greatly appreciated.
 

A:EXchange Server - access denied

More info.. maybe somebody can help? This is Exchange 2000,
You click ok on the msg box and the 'properties' will come up but, in the bottom right of the 'General' tab where the user name should be it says .\unknown account. This maybe a hint about what is going on?
 

https://forums.techguy.org/threads/exchange-server-access-denied.293913/
Relevancy 51.6%

I have both a Blackberry and a HP Jornada. I would like to sync them both to my Outlook, but only to the off line information - I don't want this info to be shared with everyone. However, when I hook up my devices and I am out of the office (not hooked up to the network) I can not sync either device. Is there a way to still have Outlook hooked up to the exchange server and load/sync my devices while offline and not have anyone see this info when I go back to my office and hook back into the network and thus the Exchange server?

Do I make that clear?!?!
 

Relevancy 51.6%

When you send an email, you have your choice of "Contacts: list:
1. Outlook Address Book
2. Global Address List
3. All Address List
All Address List -sub contacts..
4. Public Folders

And a few others:

I would like to deletea few "Contacts" list and add.

Dreamboat...help((((((
 

Relevancy 51.6%

Okay, so we're looking at getting the full meal deal for Exchange Server 2007. I've never done a ground-up install of it. What can ya'll recommend as the "optimum" deployment setup, both hardware and software?

Thanks!
 

Relevancy 51.6%

I have quite a dilemma...

I have received many, many virus-infected messages on my Exchange Server. The messages have all been cleaned (the attachments were quarantined from the users), and most of my users are gone for the summer.

Now I would like to have the Exchange Server pull all messages that meet certain criteria out of the users' mailboxes. I can't seem to find clear information on whether or not this is possible.

Thanks in advance...

Michael Guill
Misawa City, Japan
 

https://forums.techguy.org/threads/yanking-messages-from-exchange-server-5-5.28805/
Relevancy 51.6%

i can access the webmail from the exchange basically anywhere, but on a particular computer, which i use to be able to check exchange email.
now rejects other logins, except for my own login/email.

it says unauthorised.
the password is correct, i even make it very simple as 123, but still rejects me, unless i change to my mail login and the exchange accepts the password.

anyone had this problem or know how to resolve it? thx
 

https://forums.techguy.org/threads/exchange-server-rejects-logins-help-plz.369782/
Relevancy 51.6%

I receive Error message 2140 (An internal Windows NT error
occurred) when attempting to start the MSExchangeMTA
service. In looking in the Event Viewer, it gives me the
following error:
Event ID: 9400
Category: Field Engineering
A fatal MTA error has occurred. The file SCT.INP could
not be opened. [BASE MAIN BASE 1] (16)

I replaced the sct.inp with the original file from CD...
no luck. I re-ran SP4... no luck. I ran mtacheck.exe....
no luck.

As such... no incoming/outgoing mail!
 

Relevancy 51.6%

Hello:
I want to find a inexpensive software to share MS Outlook contacts between computers in a Peer to Peer network .

Please help me ...
 

A:Easy to use MS Exchange server alternative ?????

Have you tried exporting the contacts only into a .pst file that you can then import to the other computers that you want to share contacts with?
 

https://forums.techguy.org/threads/easy-to-use-ms-exchange-server-alternative.578487/
Relevancy 51.6%

Hi i m having troubles getting activesync to play nicely with an exchange server when i configure the server source and put in the server ip username password and domain then when i click ok i immediatley get the error No Microsoft Exchange was detected at the specified address Click Retry to check the address again or click Continue to configure your PocketPc to synchronize with this server anyway I know there is an exchange server at IP address i ve given it unless i need Exchange Activesync and Server 2007 to forward some more ports to the server itself which ones i don t know I ve already got forwarded If i just click continue select what i want synchronized and let it try activesync throws an error message when trying to sync with the Exchange server Synchronization could not be completed Try again later Support Code f which seems to be something to do with certificates so i got a certificate from our server not sure if it was the right one and installed it on my pda and still no joy If anyone could shed some light on this i would be very greatful Cheers George nbsp

https://forums.techguy.org/threads/exchange-server-2007-and-activesync.735656/
Relevancy 51.6%

I just to confirm some facts about the way the Exchange Server 5.5 stores attachments on the server.

If a user sends a message with an attachment to a number of mailboxs on that same server is the attachment stored once in the Information Store or is is stored once for each mailbox. I am assuming it would be stored once but I would like some clarification.

If there is any documentation that explains can you please point me to it.

Cheers

Craig

[Edited by craigal on 06-29-2001 at 12:55 AM]
 

A:Exchange Server 5.5 and Attachments storage

Does anybody know the answer to this?

Cheers

Craig
 

https://forums.techguy.org/threads/exchange-server-5-5-and-attachments-storage.46879/
Relevancy 51.6%

Guys I've took VPN server MS exchange line issues over it upon MS exchange server issues over VPN line myself to hopefully get this isssue resolved Pls I require your technical assistance Scenario User is working from MS exchange server issues over VPN line home connected via VPN he is unable to gain a connection to his msx svr Error Cannot open your default e-mail folders You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your offline folder file I'm able to resolve his name via profile settings indicating authentication with msx svr has been granted Default gateway is present msx svr can be seen by client through ping cmd Found article under Error messages when you try to connect Outlook to Exchange Server quot The action cannot be completed quot or quot Your Microsoft Exchange Server is unavailable quot or quot Cannot start Microsoft Office Outlook quot Click Start click Run type regedit in the Open box and then click OK Locate and then click the following subkey HKEY CURRENT USER Software Microsoft Office Outlook RPC On the Edit menu point to New and then click DWORD Value Type DefConnectOpts and then press ENTER Right-click DefConnectOpts and then click Modify In the Value data box type and then click OK Exit Registry Editor This worked for the first time then the next day the problem returned I expect after further deployment of Vista a lot more home-workers will experience this problem Your help will be most appreciated Kind regards Paul -Vista pilot support analyst

A:MS exchange server issues over VPN line

Guys, the problem seemed to be with the Network and sharing Center
Select Network and Sharing Center > Change the users network to private via the ‘Customize’ option
Disconnect\reconnect to VPN

NB: The Private or Work network location options allow file & printer sharing and Network discovery (other users can see you). A Public location doesn't allow any of these features.

Also this will explain the irregularity of this problem as not all users would be affected.

I hope somone finds this information useful.

http://www.vistax64.com/browsers-mail/192405-ms-exchange-server-issues-over-vpn-line.html
Relevancy 51.6%

Hi all,

I have the above system set up on 13gig partition. Thier is only 8% free space left.

Normally I just clear out the event logs and recoup enough space to keep running comfortably, but not this time.

All user data is in on a different partion. Is 13g just not enogh room for exchange and the server software or is something else clogging up the system???

Any help greatfully accepted.

Phil
 

A:Microsoft exchange/ MS Server 2000

Just a note

Program files takes up about 5.78 gig

WIndows nt directory 1.96gig

Is it possible, I just need eceryone to clean out there mail boxes?

Thanks

Phil
 

https://forums.techguy.org/threads/microsoft-exchange-ms-server-2000.571982/
Relevancy 51.6%

Hey I have setup exchange to get the mail from my ISP but now it deletes it from the server, so when I logon from home to see my mail I cant get any mail is there a way to get exchange to stop deleting the mail from my isp. Thanks

P.S.

Also If anyone knows how to sync the public folder with the private folder or how to sync a phone with exchange public. Please do not reply with add2exchange it is $450 not worth it cost more then sbs2003 it self
 

A:Exchange is deleting mail from ISP server

This is one of those areas where a bit of reading is necessary. An Exchange Server reference for Exchange 2000, 2003, or 2007 would be invaluable for you. This is not an area where a few notes will put you on the way to a quick fix. Like any server software, you have entered a new world that will require an investment in reading time... and not something that can easily be posted on TechSpot. Sorry.
 

http://www.techspot.com/community/topics/exchange-is-deleting-mail-from-isp-server.110049/
Relevancy 51.6%

I have this problem that I can't seem to resolve. (making me a bit nutty, can't sleep kinda nutty).

I am creating a new user using a template that has always worked for me for the last 2 years, all of a sudden I am getting this error.

the wizard could not successfully configure this account.
the following could not be completed:
-A home folder could not be created for the user.

mmm it is probably something simple. me frustrated.

The Trix
 

http://www.techspot.com/community/topics/any-one-here-familiar-with-exchange-server-2003.111310/
Relevancy 51.6%

We have recently upgraded to Office 2007, and even more recently Exchange server. The problem is whenever we launch Outlook it continually asks for a password. On investigation, this disappears if the LAN settings are disabled. The problem with that is we loose internet connection. We do use a proxy server. As a work-around we can disable the LAN settings in IE7and connect to the internet with Mozilla using manual proxy settings, but surely IE7 and Outlook 2007 must be compatible?

Any solutuions greatly appreciated.
 

A:Outlook 2007 and Exchange server

What version of exchange are you currently running? 2003 or 2007? What's your current setup, multiple servers or all in one?

IE7 and outlook 2007 are compatible, but neither are very good.
 

https://forums.techguy.org/threads/outlook-2007-and-exchange-server.659522/
Relevancy 51.6%

Big Bleeping Problem I have a Web Server Application that sends mail to all our internal addresses just fine but it won't send mail to any address external to our company The vendor of the web-application that runs on the web Our Through Server Exchange Web Relaying From Mail server said the problem was most likely relaying in MS Exchange or lack thereof The application only needs to send email It doesn't receive any email To paraphrase he said I would need to set our web server to be accepted as a relay by our MS Exchange Relaying Mail From Our Web Server Through Exchange server I asked him if he meant Relaying Mail From Our Web Server Through Exchange setting up an open relay and he said no He said something along the lines of we can set Exchange to relay mail from our webserver but not from any other machines He also said that he didn't know enough about Exchange to tell me how to set this up The web server is running IIS The exchange server is running Exchange Any ideas I welcome any help at all even if it is only to refer me to a forum more applicable to MS Exchange issues

A:Relaying Mail From Our Web Server Through Exchange

You should read this article:http://support.microsoft.com/default.aspx?...roduct=exch2003Scroll down to the section about To Configure IP Address Restrictions

http://www.bleepingcomputer.com/forums/t/35357/relaying-mail-from-our-web-server-through-exchange/
Relevancy 51.6%

My smartphone used to sync with the office Exchange Server, but I now want to sync my Outlook contacts with my home PC using standalone Outlook 2003. My PC runs XP SP2 and ActiveSync 4.5. Smartphone is Windows Mobile 6 Standard.

It looks as if I cannot sync Exchage Server contacts to standalone Outlook - if I try to switch to synching with Outlook it tells me the contacts on my phone will be deleted. Is there a safe way of diong this? I would rather retype all my contacts from the phone screen than risk losing them - I can no longer access my former office's Exchange Server.

Thanks for any help - Firepig
 

A:ActiveSync, Outlook and Exchange Server

Try updating XP to SP3 and check for other Microsoft Updates too, while you are at it
 

http://www.techspot.com/community/topics/activesync-outlook-and-exchange-server.124634/
Relevancy 51.6%

Hello,

I am building an application that will allow a user to use a ColdFusion interface to add/edit/delete/change passwords in Windows Exchange 2003. While I have the CF code in place, what I cannot seem to find is a command line entry to add an Exchange-enabled user to the domain. For example, I can use:

NET USER testuser password /ADD /DOMAIN

to add a user to the domain. However, this user does not have an Exchange mailbox enabled. A server administrator would still have to RDP in and enable it through the Windows interface.

Does anyone know if there is a way to do this and, if there is, what it might be?
 

A:adding a new user to exchange server

Have you looked at the PowerShell. All the Exchange Admins I know love it for managing Exchange.
http://www.microsoft.com/windowsserver2003/technologies/management/powershell/default.mspx

And JoeWare has an Exchange CMD LIne tool to create mailboxes.
http://www.joeware.net/freetools/tools/exchmbx/usage.htm
 

https://forums.techguy.org/threads/adding-a-new-user-to-exchange-server.620878/
Relevancy 51.6%

SOLVED: Build 7100 RC no longer has this problem.

outlook 2007 will not connect to my exchange server. I have tried the setup multiple times on new installs. Anyone have experience with outlook exchange setups that could help find out whats missing between vista and 7?

A:outlook 07 exchange server not working

I just readup on this yesterday... downloaded last night, have not gotten to try. Although i read where a guy had to create secure certificates for the network for each computer... did alot of skim reading on this as there was lots to find. Will try to find you the article. It has to do with the extra security win7 has. Check back here later

http://www.sevenforums.com/microsoft-office/3790-outlook-07-exchange-server-not-working.html
Relevancy 51.6%

i'm having a problem with outlook 2003, it seem to download all messages without leaving a copy on the exchange server. In my office there is no problems with this account...but when the user connect thru a vpn connection, outlook send and receive all messages, if this user come back at the office and log on outlook there is no more message on the server.....

i can't put the finger on the problem......
 

https://forums.techguy.org/threads/outlook-2003-vs-exchange-server.393261/
Relevancy 51.6%

I have an employee that anytime she logs in through our vpn(att global) from home. She gets this message when she tries to run outlook.

" exchange server is not available."

Anyone know whats wrong and how to fix it?
 

A:Outlook error: exchange server is not available.

Many references here:
http://www.google.com/search?hl=en&q=exchange+server+is+not+available&btnG=Google+Search&aq=f&oq=

{redoak}
 

https://forums.techguy.org/threads/outlook-error-exchange-server-is-not-available.769350/
Relevancy 51.6%

I'm installing a second exchange server and just wanted to get something clear. When I add second exchange server to the same site it is suppose to replicate with the first exchange server correct? And how extensive is the replication? Can I bring down the old server for upgrades and still not lose exchange functions? I guess what I asking is the replication good enough to remove the exchange services from the old box and just to run the exchange on the newer box. Trying to stay away from backups if possible because the old box runs other services and needs to remain on the network. Thanks in advance for any help.
 

A:{Advice Given} - Installing second Exchange 5.5 server

Greetings

Well, if you want to REMOVE the first Exchange server, then you will have to first move all the mailboxes from the one server to the other, which is not part of the normal replication. What Replication does, is replicate the Directory information, and the public folders (if it has been set to replicate public folders).

There is a way of moving the mailboxes in Exchange, but I am not sure that you can automate the moving of ALL the mailboxes.

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/reuel/multiboot

Every morning is the dawn of a new error...
 

https://forums.techguy.org/threads/advice-given-installing-second-exchange-5-5-server.29084/
Relevancy 51.6%

I have never setup an exchange account, I have the 2003 server loaded and exchange on it. I just can't find any place that would give me clear instructions on setting up exchange server.

Any help would be great.
 

https://forums.techguy.org/threads/setting-up-exchange-server-2003.544638/
Relevancy 51.6%

I m runing XP and installed Outlook on my PC Because I traveled to multiple sites I kept a copy of my company s exchange server details and from Stop exchange looking server for 07 Outlook Can't entered them Can't Stop Outlook 07 from looking for exchange server at whatever site I was at to get to my email etc I tried entering them when I set up Outlook at home and they didn t work for security issues I can t seem to delete them and use my outlook for my gmail account I open Outlook and it tries to quot Configure Outlook Accounts quot Then it opens a Microsoft Exchange box with the Exchange server and Mailbox I can t delete the fields and don t have a good exchange server to use I click quot Cancel quot and then it opens another error box stating quot Cannot open your default email folders The file C Documents and Settings YertDeer Local Settings Application data Microsoft Outlook outlook ost is not an offline folder quot I click OK and it shuts down Outlook completely I searched the forums and found a similar problem solved for user but wouldn t work for me Thanks for any assistance nbsp

https://forums.techguy.org/threads/cant-stop-outlook-07-from-looking-for-exchange-server.795294/
Relevancy 51.6%

Hi, our exchange server is not receiving any messages now, and it worked very well yesterday. All mail boxes under the domain is not able to receive any messages from outside like yahoo.com. We can send messages out to any domains no problem, so, what might be wrong or stopped in our Exchange server? Any possible help? Thank you
 

A:exchange server is not receiving any messages

Check the permissions on the incoming side.
 

https://forums.techguy.org/threads/exchange-server-is-not-receiving-any-messages.361410/