Hello originally my problem is that my internet browsers Internet explorer firefox can not display any kind of pages because of some kind of virus Also I had some kind of fake Microsoft Security Essentials MSE asking me to download more fake AV s onto my computer but I knew well enough that it was fake so I close it This also shows up in safe mode MSE block me from opening things such as iexplorer exe or sometimes it would say tskmanager is a virus and it wouldn t let me open anything So eventually I google this up and I read somewhere that told me to rename hotfix exe to hotfix exe when I run APPDATA so the annoying MSE would stop showing up It also told screen blue screen after KillGodzilla.exe login black Computer using displays me to update my Malwarebyte which I still can not do because I still do not have access to the Computer blue login screen displays black screen after using KillGodzilla.exe internet By Computer blue login screen displays black screen after using KillGodzilla.exe the way I am using another computer to type this So again I tried to do some more research to fix my internet problem and I found this site that told me to download KillGodzilla exe and run it and reboot my computer after that I should update my Malwarebyte but of course I can t do that because after the WINDOWS loading screen the blue log in screen doesn t show and displays a black screen which flickers sometimes after a few minutes it would restart my computer Also same thing for safe mode Does anyone know what is going on Did I screw up my computer to badly Do I need to reset my BIOS I am using Windows XP if that helps I also hav ESET smart security on my computer but I can t even open my computer right now Help is appreciated thanks
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Anyone have any ideas at all? I waited a few days, and gave as much information as possible already, please?http://www.bleepingcomputer.com/forums/t/352162/computer-blue-login-screen-displays-black-screen-after-using-killgodzillaexe/
I have a very frustrating problem and I am not sure which section it belongs in It started a week or so ago It will post and boot to the login screen just fine Once I login I have a very limited amount of time before he screen goes black Sometimes a minute sometimes only a few seconds If I leave the login screen displays windows after login Black screen up its just fine with that displaying The monitor is still on it does not say signal lost The tower is still running lights and fans It will boot and allow me to login in safe mode though One other Black screen displays after windows login forum Black screen displays after windows login I read with what sounds like a very similar problem said that it is usually Black screen displays after windows login as failure of either the graphics card or the motherboard My entire system is less than a year old They said that if you hit the numlock key after you've lost your display check the numlock light cycling If it does not cycle than it is a mother board failure If it does cycle then it is a graphics card failure I had drivers fully updated I believe BIOS is if I am remembering correctly I tried rolling back the graphics drivers as well No use ASUS Crosshair Formula-Z AMD FX- GHz -core Corsair Dominator Platinum DDR GB ASUS R X GB Corsair AXi W PSU Samsung Pro GB SSD
Well, I took it in to a computer shop for diagnostics. We will see in a few days what's wrong.http://www.eightforums.com/general-support/58549-black-screen-displays-after-windows-login.html
Hello I was successfully using my PC for the entirety of this morning After bumping my desk the machine shut off as it sometimes does when a cable is loose When the machine restarted it allowed me to login and then showed me only a black screen and cursor Ctrl alt del was functional I tried system restore and system repair both of which completed but did not have any effect I was able to access Windows via safe mode I removed my GPU Upon Black Blue Login into Screen Evolved Screen and connected my monitor to my motherboard The situation did not change I attempted to boot without my main drive SSD by disconnecting it and turning the PC on Instead of a login screen I am now greeted by a flash of a BSOD before the system restarts After running a couple rounds of startup repair Windows has declared it cannot resolve the issue Any guidance will be warmly appreciated Thank you Edit after restarting once more my bios prompted for a Black Screen Upon Login Evolved into Blue Screen boot device and I was able to reach the login screen I am now back at my original black screen problem
Can you boot into Safe Mode at the moment? if so, follow this:
1. Download the DM Log Collector application to your desktop by clicking the link below
DM Log Collector.exe
2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.
Hello folks I am not new to bleepingcomputers yes I am sometimes as guest in the background snatching some info and ideas However today I am coming as patient First of all I have to thank you geeks if allowed to name you like this for your dedication of helping people Throughout the web you are an incredible source for fighting that plaque that take often our time and sometime even more away Now to my case Some day ago my computer started with some strange behaviour Black Blue Screen) login (NOT after Screen like this some windows popped up telling me some drive letter is not supported etc the internet explorer started to do Black Screen (NOT Blue Screen) after login some strange things I do not remember what ahh and my Toshiba power saver started doing rubbish not accepting changes My antivirus was not up-to-date and I started to install new antivirus Vipre and a collection of malware scanners Whatever has found my PC as his new nest was not amused about this and responded with interfering in to the boot procedure When starting my PC Window Start screen appears normal After selecting the user login Black Screen (NOT Blue Screen) after login user desktop appears nicely still OK - gt the quick-start icons in Black Screen (NOT Blue Screen) after login the right corner start to pop up one by one - gt but in the middle after seconds black screen appears and nothing goes anymore So I started in save mode and run the scanners who discovered a truckload of Trojan and some root kit crap I cleaned up but windows does not start up anymore same behaviour as described above In the malware found were some items like buouf exe and eqhff exe I can start the PC only via F - gt last version that works I looked for buouf exe and eqhff exe found them killed them but there is possibly somewhere somthing left Now I am getting some uss q s exe error window and when connecting to the internet all seconds an ad window is opening So my first aid skills are exhausted and I have to call the ambulance Thank s in advace for the quot Doctor quot andyman
Sorry, I forgot some more symptomes. I found in the scheduled task folder numerous tasks. After deleting them all they just build up again. Also I have to correct: the error thayt appeared is referenced to a file called ouss8q8r.exe. Furthermore, suddenly the Malwarebytes Anti-Malware Icon changed (the Malwarebytes icon has been replaced by an ordinary exe icon).The system is Windows XP Home SP3.Thanksandymanhttp://www.bleepingcomputer.com/forums/t/344232/black-screen-not-blue-screen-after-login/
I'm at the end of my rope with all of this stuff I've been in a battle with my computer totalling over hours and I've made absolutely no progress Bear with me please because I'm only My dad has been helping me over the past nights he is a pretty tech savvy guy screen not black boot, Computer a does displays but to no avail So anyway here's what's going on I came home from a hard day at school eager to hop on fl studio and make some music I turned on my computer and went to the bathroom When Computer does not boot, displays a black screen I came back my computer was on my desktop with the cursor in the middle of the screen I wiggled the mouse a bit and it didn't move I noticed my keyboard was off as well I unplugged them plugged them back in tried different USB ports nothing worked So I held the power button down on the computer and it shut off I waited about seconds and turned it back on The mouse and keyboard turned back on however I got a black screen displaying options quot Run windows startup repair quot and quot start windows normally quot If I select quot run windows startup repair quot windows loads some files a loading bar pops up and then the screen goes black and doesn't respond at all to anything I left it sit for around hours nothing If I select quot start windows normally quot the windows logo pops up loads for around minutes and then the computer restarts It then take me to a screen where it tells me to insert a boot disk I have tried a system repair disk a windows installation disk a system image disk all of them load to a black screen If any specs are needed I can provide as much as I can I don't really have an extensive knowledge of the command prompt but will do as much as I can regarding it I have tried adjusting the bios settings all of the disks putting it into safe mode and windows STILL won't boot I am not amazingly tech savvy but I have a basic knowledge so please use as simple directions as possible I will provide as much information as I can if neededhttp://www.sevenforums.com/general-discussion/396250-computer-does-not-boot-displays-black-screen.html
Firstly my computer screen was blue and gave me a Error Stop c0000211 bad image check-sum , then I tried most of the advice on line nothing work then I read if I reinstall Xp the problem will go away but then the screen just when Black ?.now I have tried for day to fix it done most of the things I read on line but still nothing
Few thing I have done
CTRL+ALT+Del = nothing/no change
Avira Rescue CD = No Virus and nothing / no change
Reinstalled xp = no change
F8 Boot = Nothing /no change
Memtest86= Nothing/no change
Still the screen is black it start off fine the just goes black , im running out of options please help
Please tell us about your hardware... and the cd used to attempt your reinstall.
How long did you run memtest, and what do you mean "nothing/nochange"?
(Memtest does not try to repair anything; it simply reports whether your ram is good.)
You cannot enter safe mode. So...
Have you looked at the MSKB article that relates?
How can I diagnose a boot problem between login and desktop?
It does not occur all the time, but when it does it will take a minute or two with Welcome displayed followed by either a Black or Light Blue screen with working cursor. Then the desktop appears and everything works normally.
Would the Forum suggested BSOD dumps and attachments be any help?
New Windows 7 Home Premium Desktop computer, Gigabyte Motherboard, Intel i5 Processor
Ken try these in safe mode mate (power off > power on tap F8 when loaded -
http://www.sevenforums.com/tutorials/433-disk-check.html< if necessary include the /f and /r in the command line as per Option2
Hello friends, I recently got the Gnome desktop environment on the Ubuntu Software Center, and I used the gdm and startx command as said by another forum site. Nothing wrong, they said to logout, tried to login again, goes to a black screen and sends me back to the Ubuntu login screen. Tried again, same result, panicked. Looked up video tutorial on how to fix it, they said to access the control panel via ctrl-alt-f1 or f2, went to a black screen, no text at all, computer runs fine, no crashing. Is there a special way to access the terminal in a System76 computer, I really don't know very confusing? Is there a way to login with the guest session? I use Ubuntu 15.10 Wily Werewolf on my laptop. What causes this, I read on Ubuntu forums it's driver issues with Ubuntu and Nvidia, but I have my suspections with the Gnome desktop environment.
A few times now I have been in internet explorer and then the screen with go back and forth from black screen back to internet screen and back and forth between the 2 for a few minutes and then will hit me with a blue screen with a bunch of writing on it and then will restart. It seems to run fine after the computer restarts itself but this has happened a few times now!
Can you provide a few details [remember we can't see or touch your system] about the hardware and software?
I researched a bit on this application, it is legit. I removed it from my ProgramData folder, and I restarted my computer. No black screen for a few days. Now it's back, and I have never installed the program at all, even for the first time this happened. I used add/remove programs to remove the bing toolbar, deleted promoteinstaller.exe from ProgramData again, restarted my PC, and poof! PromoteInstaller is back. I have no idea what to do now. :(
Hello and Welcome.
We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a
Spyware 1st Steps
link at the top of each page.
Please follow our pre-posting process outlined here:
NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum
After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.
If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.
Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.
I'm running Windows 7 RTM x64 on a Macbook Pro.
This didn't happen on any of the beta releases, but I keep getting the screen reoloution dialog box when i first login.
I can close it, of course, but its a little annoying
Double check your startup program list to see if there is anything listed in it for this. You can temporarily disable them one at a time if needed to help determine which one it is. Afterwards, you can just re-enable the ones that were not it.
Hope this helps,
windows 7 ultimate
intel core i5-2400
1st day, everything's fine and only installed 3 games.
2nd day, no specific error but after windows loaded what i see on the login page is black screen with a cursor [typed my password despite that and able to login] and all i see is my desktop wall paper.
3rd day, reinstalled windows 7 and after 5-7 hours had the same problem. Now i'm running on safe mode trying to solve this problem
on my device manager under other device, there's yellow triangle with exclamation sign in it on; Ethernet controller, PCI simple communication controller, SM bus controller and USB controller. Maybe my problem is caused by that? How can i solve this? I did abit research myself and found out maybe caused by registry related stuff how can i solve this?
Sorry about the question i'm a noob at computer stuff lol
Take it back to the store and get them to fix it or get a refund - if you keep it, I'd recommend taking out technical support if you are not too PC savvy.http://www.sevenforums.com/general-discussion/247820-2-days-old-computer-black-screen-error-login-windows.html
Hi Everyone As the title says about i have a Dell Vostro and im running Windows with a bit It is only years only It started about a month ago I was on my laptop viewing and Black screen. Vostro login screen Dell reach Wont 1520. deleting some unwanted photos i had A few minutes later Dell Vostro 1520. Black screen. Wont reach login screen i realized that i deleted a photo that i wanted So i went to the recycling bin and restored that photo When i went back to my photos and went into the album it said something like i do no have permission to access this folder Please press continue to get full permission I clicked continue and i got the access i should have Now i tried many more random folders and the same Dell Vostro 1520. Black screen. Wont reach login screen thing happened Also when i came Dell Vostro 1520. Black screen. Wont reach login screen out of the folders the folders had a big pad lock sign on the front of it After that i shut down the laptop and went to turn it back on The laptop will power on like normal I can press f for the boot options which i have already tried many times I also tried it in safe mode and what-not but still nothing I can hear the fan and stuff spinning up like normal I have also put and CD into the CD ROM and that spins up fine So after the Dell logo on the screen it goes black and stays that way with the cursor You can move the cursor around no problem I should also add that the battery light is and has been flashing for a good wile Its flashing orange and blue I m wondering if this has anything to do with the battery Because my laptop will not charge with the AC adapter in it for many months now It will only stay powered on with the AC adapter plugged in One more thing The LED lights over the buttons None of the are flashing besides one on the far left And i cant find out anywhere what this LED light stands for It looks like a battery to me Any advice would be so great The way it is now i don t care about the laptop I really want to hope i can save my pictures and videos i have on there nbsp
Since its a laptop the harddrive is easy to pull out and remove.If you have or can get a usb sata/ide connector hook the drive to that and then to another computer if you have one so you can save all of your important data like pix, music, etc.The laptop battery is going to have to be replaced since its no longer charging properly.It sounds like there might be a short somewhere or a power supply problem along with a bad battery.Or possibly something might be wrong with the screen or video or graphics card.
Hi I have an office desktop pc HP COMPAQ ELITE running -bit Windows I was manually running Windows update and manually updating some of my drivers when the pc suddenly turned itself off I turned it back on and now it doesn't get to the login screen anymore It just displays screen mouse movable cursor with Black appears screen login before a Black screen with movable mouse cursor before login screen appears black screen with a movable mouse cursor although I can't really click anything or even press any keys on the keyboard I tried loading into the recovery environment but it only gives me the option to restore my hard drive to factory settings which I don't want since I have lots of important files in it I've searched around the forums but I can't find a problem that is EXACTLY like mine By the way my pc is on a dual boot mode with an Ubuntu and that is how I'm able to access this forum right now The dual boot was set-up by the employee that I replaced so I have no idea how this is set-up Any help would be appreciated -Ron
Firstly, boot into the Linux operating system, and then create a backup of all important files and data.http://www.sevenforums.com/bsod-help-support/300316-black-screen-movable-mouse-cursor-before-login-screen-appears.html
Hey everyone I did a bit of research and this seems to have been an issue for a while or has been in the past Was upgrading to windows I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around It then got through that and began the installation process with the big circle and rebooting process However around when I last looked at it it was just black screen this stayed this way for about - hours I then decided to reboot the pc and it has now booted to the login screen Is this a known (no screen just Black Screen to blank) but cursor of Doom Booted login bug or could there be a possible issue The problem seems a bit different Black Screen of Doom but Booted to login screen (no cursor just blank) as some people I saw have had to fall back on PC restore points etc So not sure if it installed or what could be the problem Also side note I upgraded my pc when windows first publically released but rolled back because I had about min shutdown times So not sure what is Black Screen of Doom but Booted to login screen (no cursor just blank) going on and any info would be greatly appreciated Thanks
I never had a problem upgrading like you've experienced but I experiencing Windows 10 upgrading process is the longest time taken ever compared to previous versions. It took me 1 hour+ to finished.
Play around a little bit to get used to it then did a clean install. No problem arise, seems working fine.
The point is, problems always happen after upgrading, to solve it just perform installation from scratch (clean install).
Hi people, i've just registered to this forum to ask you about this, Since i've made a registry defrag with TuneUp Utilities (which probably has gone wrong), when i reset the computer, and I logon to my user, it shows a black screen, then back at the logon screen. If I do it again, the user doesn't show up anymore!
It happened three times already, i had to make new users, and i'm sick of it. Any ideas of what could it be?
Yet another case of registry defraggers causing harm. In the future, you know now to stay far away from them.
I suggest a system restore to get to a point before TuneUp utilities. If that doesn't work, it will be time for a repair install.
Hi I would really appreciate any advice i've been trying to fix for four hours without any luck.
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that i did not have a system restore point. I cannot start in any safe mode.
I have all my pictures, uni work etc and im terrified i've lost it all. I've only had the laptop a year.
Any suggestion would be amazing
Hello seven11 and welcome to SevenForums!
I think this article will be fairly interesting to read.
Why is my screen black when I start Windows 7?
I updated my ATI HD 5770 drivers today, and rebooted. Afterwards, the login screen sound played, but nothing was visible.
I booted into safe mode and deleted the video drivers and attempted to install some working ones - the same issue occured (Windows Update).
Can anyone give me a hand in finding the correct drivers to install?
Windows 7 HP 64 Bit
ATI Radeon HD 5770
Resolved. I was a retard and didn't realize it was showing the desktop on my TV which was on a different display.http://www.techsupportforum.com/forums/f217/video-card-drivers-black-screen-on-login-screen-676105.html
The issue started a few hours ago when I was playing League of Legends specifically when the game has finished its loading and crashed to Desktop which is a common problem on my laptop As usual I would restart the game but before I could do that explorer exe Mouse Cursor Login before Screen Black of Death Screen with crashed my entire Desktop has turned to the familiar transparent whitish filter before the quot Explorer exe has crashed quot message popped out which was peculiar at the time because this is Black Screen of Death with Mouse Cursor before Login Screen the first time it had happened So I allowed the program to restart it didn't So I shut down via holding down the power button and rebooted the laptop It went into Startup Repair and did its automated repair so I let it repair while I did my stuff When I returned the repair had completed and it booted the laptop into the infamous Black Screen of Death with a movable mouse cursor This is right before I could log on to my user account and I decided to search for solutions initially on Google using an available PC Most of it didn't work for starters booting up to Safe Mode Safe Mode with Networking and Last known Good Configuration brought me to the same movable mouse cursor with black screen combo Safe Mode with Command Prompt has the same problem and the Command Prompt does not appear After which I accessed the Repair menu with the F button right after the BIOS loads and tried every option First Repair Your Computer did not work as it couldn't find any problems after the first initial repair it did System Restore didn't not have any Restore Points which is strange because I do have several restore points prior to this issue happened I skipped the Memory option and used the Command Prompt to do a sfc exe scannow to detect any problems according to one solution I found but it gave the message telling me there is another repair job that requires my laptop to be restarted At first I did went back and did the sfc command no luck After all that I went to try the Ctrl Alt Del and starting explorer exe as a new process but the task manager does not appear Not in any bootable modes with the mouse cursor present At the moment I am out of ideas and solutions it really is starting to drive me against the wall because this laptop has a lot of information I need I do not have access to my backups or recovery disks as I'm currently overseas I hope I can hear from any users here about what to do My laptop Acer Aspire TimelineX TG Windows Home Edition x I do not have any USB devices connected to my laptop except for my mouse and that's about it I will try my best to add on more missing info if pointed out thank you very much
having the same problem here on my toshiba satellite L655-1je laptop. did everything srwalpha did but to no avail. hence, bumping this up for help pls...http://www.sevenforums.com/bsod-help-support/192503-black-screen-death-mouse-cursor-before-login-screen.html
Hello I ll go ahead and start from the very beginning Thanks in advance though for taking a look at my problem About a month ago my computer would give me a few problems while booting screen before Cant black Windows login boot, Solved: screen up I would start the computer it would run through BIOS run through the Windows loading screen and after that it would run the CHKDSK to make sure my disks are fine CHKDSK doesn t work it just freezes right before checking the disks so I restart and generally it will boot up Most of the time it would boot up perfectly but rarely would it go to the xp loading screen and then flicker as if it as Solved: Windows Cant boot, black screen before login screen going to go to the windows login screen but wouldn t The screen would just stay black and I d have to restart Solved: Windows Cant boot, black screen before login screen Next time generally it would work perfect So this brings me to the current day After the Solved: Windows Cant boot, black screen before login screen windows xp loading screen it goes black The computer is on but I don t see any activity for the HDD via the LED SO i go into safe mode i finally get CHKDSK to run I had to really mess with some stuff to get that working Windows says the volume is fine and the only way I can boot my PC is in safe mode but even that will freeze sometimes while loading some of the files Just to let you know I m running Raid and this is my first time running it I m not sure if this symptom is a common problem if one of the disks are going out Does anyone know whats going on Could it be a virus that messed with a boot ini or any startup stuff also is there anyway to remove problems within safe mode I tried removing anti-virus program thinking it might help but wont allow me nbsp
Thanks for all providing valuable suggestions in my previous thread Win boot Win login on screen before Black up, Install)? screen 7: (Clean Black screen on boot up before login screen As Win 7: Black screen on boot up, before login screen (Clean Install)? I am picking the clean install option for my resolution I am opening this new thread I reviewed the tutorials Macrium of this community I found Macrium Reflect Free Version July for download I downloaded installed above Macrium to working PC This version has an option to create Win 7: Black screen on boot up, before login screen (Clean Install)? Macrium Reflect rescue media on CD DVD or USB stick upon installing on working PC I created a rescue media USB I created complete HDD image of my unbootable Z before doing clean win install I am going to clean install Windows Home Premium bit using my OEM KEY I posted the OEM DISKMAP in my previous thread Post I find System d MB Windows OS c GB amp my Lenovo data e GB Lenovo says if I change the partition configuration it will make built-in Lenovo recovery unusable I like the idea of adopting infrequent system changes adding new programs etc and frequent data changes growing user documents in Win 7: Black screen on boot up, before login screen (Clean Install)? image backup strategy I mean taking system partition d c image back up as and when I add new programs and taking data partition e image backup periodically How do I re-structure my DISKMAP to have effective periodical image backup without disrupting built-in Lenovo recovery Are there any Windows disk partition recommendation guidelines Thanks for sharing helpinghttp://www.sevenforums.com/general-discussion/380263-win-7-black-screen-boot-up-before-login-screen-clean-install.html
Hey need some help yet again Yesterday I downloaded Mission Against Terror New MMOFPS and I downloaded it Upon updating with the patcher my laptop went haywire It started opening up random IE windows slow speed etc etc I did a whole memory scan and a malware adware spyware scan There were several viruses and whatnot but Login screen and BEFORE Screen 7 Windows Black logo/loading! AFTER what is important are the files SVC exe and exe you'll find it why later on The anti-virus said that it had fixed deleted everything So I restarted my laptop hoping that I'd get it up and running in safe mode for any further scans Unfortunately when I restarted it after the windows loading screen which is right before login screen a black screen appeared With nothing at all Not even a cursor BLACK JUST BLACK with NO keyboard access mouse access But that's expected since it's BEFORE the login screen It's the same with normal boot boot that does that quot last best used option quot or whatever safe mode with networking etc etc All the same Black screen Good thing I had Black Screen BEFORE Login screen and AFTER Windows 7 logo/loading! WIN XP on my other hard drive So I booted up into WIN XP where I'm posting this from and did a FULL NOT QUICK system scan to find the SAME Viruses YET AGAIN SVC exe and exe along with some other minor tracking cookies and what-not Win XP on second drive is also having a few problems like IE shutting down every second using firefox now Think this is a whole system prob But why Didn't the antivirus-es fix it I say quot es quot because I used SuperAntiSpyware Norton NOD Malware Bytes and AVG I've tried the system recovery thing F thing on boot screen NOT ON LOGIN SCREEN Remember I can't reach that but that doesn't work either So any suggestions Btw The windows PRO bit that's corrupted not starting is on C and Win XP is on D Attached is a log of my most recent scans Thanks in advance
Hi your problem can best be addressed in the security section of the forum
My computer was turning off every time i tried to turn it on I ran my computer in safe mode and tried to restore to before the previous update The computer then attempted to reboot as a process of the system restore As it was Computer a with cursor Black a screen [SOLVED] white on before login? stuck gets turning back on the computer shut down again mid-process After some research i concluded that the problem was that my CPU was overheating I purchased thermal composite and applied it as instructed on the suppliers website I attempted to reboot my computer but after the [SOLVED] Computer gets stuck on a Black screen with a white cursor before login? green-bars loading screen the computer screen became black with the cursor in the middle of the screen I am sure this is due to the sudden shut down during the restoration process I have tried [SOLVED] Computer gets stuck on a Black screen with a white cursor before login? running my computer in safe mode but i get the same result After further research i tried the F advanced boot screen The quot Repair my Computer quot option is not available I built this computer a year ago I [SOLVED] Computer gets stuck on a Black screen with a white cursor before login? believe Windows is corrupted because at the start up loading screen with the small green bars the logo doesnt show on top Please help
do you still have the Vista installation CD?http://www.techsupportforum.com/forums/f217/solved-computer-gets-stuck-on-a-black-screen-with-a-white-cursor-before-login-498177.html
My have login screen 1 -XP unread message Windows at displays WinXP Professionsl with Service Pack Now a days it displays unread message at login screen Windows -XP displays 1 unread message at login screen Totally i have created user names This PC is disconnected for accessing internet If i try to access internet at this time i am unable to access internet also since it is disconnected from internet months back i was connected this computer to internet By that time while browsing internet in this computer some one else is trying to access this computer remotely I have not yet configured for Outlook Express also Totally computers are connected to this computer among i use to browse internet in computers As per my observation when i on adsl modem and on that computer by that time i use to see this message Usually i never use to on the ADSL Modem Some times while shutting down this computer i use to see this message quot user is connected this computer shutting down will cancel the application y n quot This message is use to see in the absence of internet ADSL Modem is off and at a same time i have not browsing other computers also I have a doubt that this system is remotely connected to internet or is it due to spywares Plese help me to solve these problems With regards A C Shailaja
XP comes with Outlook Express defaulted to install, and I bet the 1 unread message is the "Welcome to Outlook Express" that everyone gets. It's not really an e-mail. Launch OE on all 3 accounts until you find it and "read" it.
I think TweakUI has a tweak that turns off the reporting of "unread" e-mail from OE.
This is the issue I'm having I start up my computer and after about - min it either blue screens black screens Its not a virus I've re-formatted a few times after a crash and still the same issue I've asked computer shops and quot gurus quot about the issue and no one can give me a answer On another note A few months ago About the person who I bought my computer from installed the graphics card wrong and the card would slip out of place I moved my card to the secondary slot and the origional slot had been fried After I resolved this issue the computer would run fine But recently It started doing same ol same ol my Nvidia control panel screen blue/black Computer has a quot Data Execution quot Error every time I try to open it Here is the crash issue Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP BCP BCP CC DC OS Version Service Pack Product Files that help describe the problem C WINDOWS Minidump Mini - dmp C Users Caul Computer blue/black screen AppData Local Temp WER- - sysdata xml C Users Caul AppData Local Temp WER B tmp version txt Access is denied when I try to open them Any info would be great thx
Hi and welcome to TSF please do not post your email address it is a invitation to get spammed I have removed it for your own security,Now can you please follow the instructions here http://www.techsupportforum.com/foru...ta-452654.html and upload the files so that a analyst can check the dumps and look for the causehttp://www.techsupportforum.com/forums/f217/computer-blue-black-screen-663316.html
I'm having a weird problem. My laptop will show a black screen when booting. It seems no matter how long I wait, nothing happens. When I attach an external LCD to the laptop, it shows the Windows load or Windows resume graphics on the external monitor, but not on my laptop screen. As soon as the Desktop Screen with the Windows Login appears, it then appears on my laptop as well.
I also can't seem to get to safe mode. I push f8 and it never comes up I haven't installed any new software or hardware to cause this.
Alright today I hibernated my computer I usually hibernate left it for an hour and attempted to turn it back on now it loads fine but once it gets to the point where it should display the vista logo and then the log in screen the screen goes blank The hard Screen turns black screen login reaching before the disk light is blinking fast so fast it's almost just staying on and the wireless does its blinking patterns as Screen turns black before reaching the login screen if it's redying the wireless connection but the screen remains black I've tried safe mode same result Two screens same result I booted Ubuntu and it was fine so I'm using that now First of all any insight into how I should go about fixing this If not I have extremely important files on the hard drive is there any way you could recommend getting them back Thanks for any help I'd hate to have to take it in Screen turns black before reaching the login screen and risk the guys at the store deciding it's easier just to wipe the hard drive or something
Are you using a Ubuntu Live CD, or are you dual booting?
If you're dual booting, you can access your ntfs partition from Ubuntu using steps listed on many many web sites: http://www.google.com/search?hl=en&q...earch&aq=f&oq=
Some are easier than others.
As for fixing your Vista. I have reservations because in some of my steps Vista has this nasty habit of overwriting the master boot record with its own without warning you (making you unable to boot into ubuntu if you dual boot), so research some more, and proceed with caution. If you boot into the Vista DVD, I think you can click repair, and you have a bunch of options and it looks like this:
I haven't tried them in a while so I can't really recall what each does.
You can try going back using a restore point. Be VERY cautious with "Startup Repair". I think that's the one that rewrites the master boot record. (if you really need to try it, research how you can backup the master boot record in ubuntu, then restore it if needed - usually a flash drive, a floppy, or a bootable CD may be needed - you most likely would be able to do it from the live cd if you know the steps though).
And if all else fails, do a repair install. Can't recall how it's done, but there are many sites dedicated to that topic. You can also ask around the forum about it.
Background A start won't black up, before login screen Vista screen. week ago on vacation I opened my HP Pavilion dv - cl a laptop Vista won't start up, black screen before login screen. running Vista Home Premium SP and suddenly green and black lines began forming Vista won't start up, black screen before login screen. across its screen I was later told this was a pressure crack although that is not what I m posting about Freaked out that day I turned the computer off and on several times using only the power button once foolishly interrupting a quot Startup Repair quot process Problem When I got home I hooked up the laptop to my TV so I could see what was going on After attempting to turn it on many times I eventually got the BSOD with a STOP x c f error I couldn t access the Recovery Module even to backup or Safe Mode Going into personally uncharted territory I booted from a Linux System Rescue CD to delete the TxfLog file that was apparently the cause of the problem I no longer get the BSOD I get a black screen KSOD sometimes w mouse sometimes w o after the quot yellow bar quot loading screen I still can t get into Safe Mode but I was able to use a Vista repair CD I downloaded to finally backup onto an external hard drive What I ve Done So Far I ve run chkdsk checked the memory and hard disk from BIOS options and run Startup repair I did the kind of Windows backup where everything goes to one file I d prefer not to start from scratch if I can avoid it Thanks so much for any and all help guys I appreciate it a lot Charlie
I couldn't access the Recovery Module...Do you have a Recovery CD, Windows Vista CD, or Recovery Drive (partition)?What happened when you tried to access it?------------------------------------------------------------You said that you were able to backup onto an external harddrive, so important data is safe.The best option right now would probably be to re-format.http://www.bleepingcomputer.com/forums/t/413304/vista-wont-start-up-black-screen-before-login-screen/
Hello. Recently had a virus and have been going through the steps here on bleeping computer to help get rid of it. The last thing I was told to do was run the farbar scan tool and to copy and paste a code and hit fix. Upon doing so the computer prompted for a restart. It now won't get to the log in screen. I've tried booting in safe mode and I've also tried last known working configuration as suggested and nothing has worked unfortunately. I was told to come here. Hopefully something can be done. Thanks a ton.
Tap F8 at boot and select Repair Computer from the Advanced Boot Options. Do a System Restore to a date just before the problem.
You cannot do the above and if you have another Windows 7 computer create a System Repair Disk. Boot and try a System Restore to a date just before the problem.
this is my very first forum post here, few people have recommended this site as a best W7 community on the internet.
I have problem with black screen(lag) between windows starting message and login screen, lag is about 10 seconds and its very annoying, here is the video so you can see the problem:
maybe this is normal? i have this install almost two years, i dont have to much programs, and i disabled almost all useless startup programs. I tried also disabling bootscan in my NOD32 antivirus but nothing changed.
Is there any solution for this? and can i post to you some logs or something?
It is Dell's factory install? Usually it is bloated up with some services and programs those are not needed. So you need to clean them up. Follow this guide:
Clean Up Factory Bloatware
Hello I hope someone can help me out with my problem About the problem Yesterday I did a shutdown from the start menu and turned off my monitors however the computer did not shutdown and was still on after minutes so I just turned it off with the power button Today I started my computer it boots I get the instead Vista of boots black screen login to screen usual loading bar and then a black screen and not my welcome screen So I have tried the following to fix it I tried booting with last known configurations and got the same problem I tried booting in safe mode it loads for about minutes and then just stops loading I tested the memory with a memory test from Acer no Vista boots to black screen instead of login screen problems found I tried booting with a lower resolution get the same problem Just to see if its not a hardware problem I have booted a linux live cd and that worked I have an acer recovery menu but it wont let me recover to a previous point And I don't have a vista CD or recovery disk I think it was updating when I shut it down So i hope anyone has a solution for my problem if you need more information please ask and I'll answer Many thanks for reading and maby even replying to my problem Greets NiJor EDIT Somehow after waiting an hour doing nothing then rebooting into safemode worked There i could do a system restore and problem is solved
See if there is information on that PC on making recovery disks. I just used 2 dual layer DVD's to make recovery disks for a Compaq laptop.
Also, next time your machine boots to a completely black screen....let it stay there while it re-configures it's self. Don't be so impatient
So I've hit this issue where I am welcomed with a black screen which is supposed to be my login screen It boots up but what would look like the login screen is simply black When moving the mouse the cursor would emerge whilst changing from pointing to loading cursor animations The wifi icon from the lock screen seems to flicker sometimes but that's pretty much it nothing could be done from my end I've tried resetting restoring from the advanced boot options triggered by constantly interrupting the bootup process but it's telling me it cannot be login Black Windows to prior screen 8.1 screen done since the location of the OS is not quot unlocked quot Safe mode with networking command prompt gives me the same result Unfortunately I do not have a system restore point nor a system image to use The command Windows 8.1 Black screen prior to login screen prompt from within the repair does not let me use sfc scannow too Brief history of what happened beforehand I installed the Uxtheme patcher to enable third-party themes then before rebooting installed an application called StartIsBack After rebooting it seemed fine and I changed my mind and decided to uninstall StartIsBack It turns out the aforementioned program brings a cavalry of bloatware before you could uninstall it After I got rid of the extra software it came with I proceeded to delete each part of StartIsBack from its respective directories but it wouldn't let me delete its core StartIsBack dll because it is running in the background There is no sign of it as well within the task manager So I had to boot to Safe mode to manually delete it and finally getting rid of it After rebooting normally the explorer exe didn't open upon start-up Opening it manually by launching it from the Task Manager doesn't work either so I decided to try and use SFC scannow to try and fix the problem It reported that it wasn't not able to fix some of the errors found and changes will take place after the next reboot After rebooting I am greeted with the black screen issue tl dr is there a possible solution to this without having to format my os partition and or installing a new one If I really have to is it possible to just delete C and perhaps install Windows over it My media files are in D
Try this tutorial: Repair Install Windows 8http://www.eightforums.com/general-support/64442-windows-8-1-black-screen-prior-login-screen.html
Hey First I posted this in the Win section but someone suggested that I post it here since it involves malware a virus So BEFORE Black 2008.exe) Login Screen and screen! (SVC2.exe here's the post from over there Yesterday I downloaded Mission Against Terror New MMOFPS and I downloaded it Upon updating with the patcher my laptop went haywire It started opening up random IE windows slow speed etc Black Screen BEFORE Login screen! (SVC2.exe and 2008.exe) etc I did a whole memory scan and a malware adware spyware scan There were several viruses and whatnot but what Black Screen BEFORE Login screen! (SVC2.exe and 2008.exe) is important are the files SVC exe and exe you'll find it why later on The anti-virus said that it had fixed deleted everything So I restarted my laptop hoping that I'd get it up and running in safe mode for any further scans Unfortunately when I restarted it after the windows loading screen which is right before login screen a black screen appeared With nothing at all Not even a cursor BLACK JUST Black Screen BEFORE Login screen! (SVC2.exe and 2008.exe) BLACK with NO keyboard access mouse access But that's expected since it's BEFORE the login screen It's the same with normal boot boot that does that quot last best used option quot or whatever safe mode with networking etc etc All the same Black screen Good thing I had WIN XP on my other hard drive So I booted up into WIN XP where I'm posting this from and did a FULL NOT QUICK system scan to find the SAME Viruses YET AGAIN SVC exe and exe along with some other minor tracking cookies and what-not Win XP on second drive is also having a few problems like IE shutting down every second using firefox now Think this is a whole system prob But why Didn't the antivirus-es fix it I say quot es quot because I used SuperAntiSpyware Norton NOD Malware Bytes and AVG I've tried the system recovery thing F thing on boot screen NOT ON LOGIN SCREEN Remember I can't reach that but that doesn't work either So any suggestions Btw The windows PRO bit that's corrupted not starting is on C and Win XP is on D Currently I am doing the GMER Rootkit scan I will attach that whenever it finishes As for my install disc I'm currently downloading Windows Pro bit ISO from MSDNN which I will then burn onto a dvd when download is completed Thanks in advance Here is my DDS txt DDS Ver - - - NTFSx Run by Helo at on Wed Internet Explorer Microsoft Windows XP Professional GMT - Running Processes D WINDOWS system nvsvc exe D WINDOWS system svchost -k DcomLaunch svchost exe D WINDOWS System svchost exe -k netsvcs svchost exe svchost exe D WINDOWS system spoolsv exe D WINDOWS explorer exe D Program Files ClamWin bin ClamTray exe D Program Files SUPERAntiSpyware SUPERAntiSpyware exe D Program Files Prevx prevx exe D WINDOWS system svchost exe -k imgsvc D WINDOWS system wscntfy exe D Program Files Prevx prevx exe D WINDOWS System svchost exe -k HTTPFilter D Program Files MiPony MiPony exe D WINDOWS system wuauclt exe C Program Files gPotato AikaOnline AIKALauncher exe D Program Files Microsoft Search Enhancement Pack SeaPort SeaPort exe D WINDOWS Microsoft NET Framework v mscorsvw exe D Program Files Windows Live Messenger msnmsgr exe D Program Files Windows Live Contacts wlcomm exe D Program Files Mozilla Firefox firefox exe D Program Files Mozilla Firefox plugin-container exe D Documents and Settings Helo Desktop dds scr Pseudo HJT Report uStart Page hxxp www google ca BHO C C A-E - b - D - CECB - No File BHO SafeOnline BHO d - c- bd-b - e d ef - d windows system PxSecure dll BHO Search Helper ebf - f- bff-a f-b e aac b - d program files microsoft search enhancement pack search helper SearchHelper dll BHO Windows Live Sign-in Helper d - c - abf- ecc- c - d program files common files microsoft shared windows live WindowsLiveLogin dll BHO Windows Live Toolbar Helper e a dc - - a - ea-dc ec acf - d program files windows live toolbar wltcore dll TB amp Windows Live Toolbar fa ef- d- d - b f- a d - d program ... Read morehttp://www.techsupportforum.com/forums/f284/black-screen-before-login-screen-svc2-exe-and-2008-exe-516283.html
Apologies if this is in the wrong section I have a Dell Inspiron and the owner said that his son installed BearShare and it's been giving him complications He told me it sometimes freezes when he tries to start the computer and has to give it a hard shut down I hopefully removed BearShare with Malwarebytes and MSE yet I can't seem to find why it's not letting me boot up regularly It boots into safe mode fine and I can access everything from there but when I try to restart into regular mode it Black active screen, cursor before screen. login just hangs after 'Starting Windows' with a black screen and active mouse cursor I've tried various tutorials from searching quot black screen active cursor quot quot laptop frozen after starting windows quot etc but nothing that I try works After a few hours of research I keep seeing the reoccurring phrase 'shell' I believe it's not being loaded correctly or at all I've tried a fix by Prevx that said it would fix the black screen to no avail But here's the funny part Sometimes it boots to Windows fine and everything acts as it should There's been several times I was about to call the guy and tell him that the laptop is finished but I hesitated and restarted just to see if it was fully fixed Vid Dell - YouTube Let me know if I need to post further information -Dustin
I would try some more scans to be sure
Anti-rootkit utility TDSSKiller
Windows Defender Offline
run some hardware tests
RAM - Test with Memtest86+
and when you can get it to boot
a system file check
SFC /SCANNOW Command - System File Checker
and have a look through these handy tutorials
Troubleshooting Windows 7 Failure to Boot
and if all else fails
While attempting to boot, Death before screen login Black during of Screen restore a previous backup of my system with Norton Ghost I got an error and the system rebooted Upon reboot I get the black screen of death with just the cursor instead of the usual login screen I have tried the following thus far These all give me the black screen of death with movable cursor boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an Black Screen of Death during boot, before login screen initial system startup repair which went through and said it repaired it rebooted but no change I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point but it says I don't have any LIES BLASPHEMY tried restoring from restore point on external disk - seemed okay then failed chkdsk - found some stuff fixed it no change tried ctrl alt del on black screen of death - nothing Now I know that the hard drive itself is alright that is the information is still all there still While I can't give you exact specs I can tell you that I am on a Dell Studio XPS running Win home premium bit I'm at a loss as to what else to do Despite being a black screen with just a movable cursor the system still appears to be running as every few minutes it will show the quot thinking quot cursor where it shows the little circle next to the arrow If anyone has any tips or suggestions it would be greatly appreciated hugs and kisses Amplitude
Known issue some users have it others don't did you try Why is my screen black when I start Windows 7? or this mentions a "black screen of death" fix but i would be verry carefull running executable files from unknown sources
Windows 7 Black Screen Of Death Fix
also this http://www.everything-microsoft.com/2009/12/01/windows-7-bsod-black-screen-of-death-freeze-and-potential-fix/
but it also points to external sources microsoft should fix the issue or that *.exe should be authenticode signed so you have a way to verify it's trustworthy.
Hi People I have been a member of this forum and most often I have found a solution by just searching but today I have a problem which I have not been able to find a solution for therefore I am listing my problem I have Windows installed on a desktop since months now it was working fine till yesterday evening but don't know what happened it was loading windows Basically what is happening is that it is booting fine then the windows logo comes and after that of Screen instead Black Screen Login Mouse Pointer with I get a black screen with mouse cursor whereas it was supposed Black Screen with Mouse Pointer instead of Login Screen to have the login screen Now I had this same problem months back with the same computer but then I was unable to solve it using the MBR repair commands and so I formatted the drive C of my computer then Now I am determined not to format the DRIVE C so Black Screen with Mouse Pointer instead of Login Screen I went to the command prompt using system repair tools from the DVD and went into DISKPART When I selected disk which is the only disk installed and entered detail disk this is what I got Disk ID SOmething Type ATA Status Online PAth Target LUN ID Location Path Something Current Readonly State No Read Only No Boot Disk No Pagefile Disk No Hibernation File Disk No Crash Dump Disk No Clustered Disk No ----------------------------------------------------------------------------- Volume Ltr Label FS Type Size Status Volume C System Rese NTFS Partition MB Healthy Volume D NTFS Partition GB Healthy Volume E NTFS Partition GB Healthy Volume F NTFS Partition GB Healthy Now I found that the system reserved partition has somehow claimed Drive Letter C after maybe a power failure Now I think the problem would be solved if I could somehow remove C letter from the System Reserved partition and assign it back to Volume I later on checked on the recovery files that in my computer the DRIVE C is the actual system reserved partition which is supposed to be hidden and DRIVE D is the one which holds the actual windows installation I have also the information on VOLUME when I selected DISK and then selected VOLUME and entered detail volume I got the following result Readonly No Hidden No No Default Drive letter No Shadow Copy No Offline No Bitlocker Encrypted No Installable No Now I changed the attributes and to Yes think it would solve my problem but it didn't I would also like to know why this has happened I think this is due to power failure but why is the system reserved partition showing as C Please help I have tried to search and fix the MBR as well but to no avail I don't want to format my PC again I have managed to remove the drive letter of the system reserved partition and assign letter C to the D drive But then I got a message on rebooting BOOTMGR missing press CTRL ALT DEL Then again I have tried to repair the bootmgr by BOOTREC fixboot this removed the BOOTMGR missing error but got me back to where I started that is a BLACK screen after windows logo I am still not able to get the LOGIN SCREEN don't know why Please help
Have you tried Startup Repair from the Win7 installation DVD?
Have you tried System Restore to a point in time before these errors occurred?
My son has a Toshiba Satelite P that he just upgraded from Windows XP Home Premium to Windows -bit After to screen after upgrade login/welcome 7 goes before screen System black Win 32-bit the upgrade completed the computer booted fine The within minutes he got the BSOD and the system rebooted Now he can t get Windows to fully start We ve tried all of the options from F with no success We have the Toshiba System Recovery Disk but it won t launch The Boot sequence has been changed to boot from CD DVD and then the Hard Drive The Memory Diagnostic from the Windows disk ran fine with no errors I m thinking I might need to re-format wipe the drive to start fresh but don t know where to obtain System goes to black screen before login/welcome screen after Win 7 32-bit upgrade a boot CD no floppy drive on this laptop Does anyone recommend a software that I can purchase to clear everything without destroying the CD DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings
Toshiba, usually pressing F12 when the Toshiba Logo appears will get you to the Boot device menu. If not then,
Go here https://www.csd.toshiba.com/cgi-bin/tais/support/jsp/pubLogin.jsp Choose the Download Tab, No Login required, That is for the Forums.
Download the user manual and see how to get to the boot from CD/DVD drive.
The Drivers tab will show the Toshiba drivers. They are needed for Windows 7, If no drivers for WIn7, Then don't, as getting all that are needed will be a royal pain.
I've even seen certain model of Toshiba that have a XP Bios and a different bios for Vista.
I have a Dell Vostro 1700 Laptop with the 256mb GeForce 8600M GT graphics card. The laptop lcd works fine but when i connect an external monitor using the VGA output the external monitor just displays a black screen.
I have already ruled out drivers and operating system as i have tried it across various versions and with different drivers and still nothing. i have also tried it with ubuntu with no success.
The computer detects that there is a montior and can even tell the specs of the monitor. It just the monitor detects that it is connected to a computer but just displays a blank screen.
Ive tried disconnecting everything else just leaving the motherboard graphics card and connecting the external diplay and displays a blank screen even with startup and diagnostics.
What would i be looking at here a new motherboard and/graphics card? evertyhing else works just not the vga output
Hello I recently purchased a new laptop. I have a Dell Inspirion 5559, and recently as of yesterday have run into issues using the webcam. My webcam only seems to work if directly in front of a light. Even with all my lights on if I move it, it will show a black screen. For example all my lights are turned on, but unless it's facing the window where there's sunlight it will just display a black screen. Here are a couple examples.
In front of window:
Not in front of window.
I have an Acer Aspire 1710 notebook that I just put 18mb of video and about 20mb of pictures onto. I edited the video with windows movie maker and everything was going great. I had saved the video onto my desktop and reviewed it. i decided to put one of the clips of the movie in slow motion. It played the clip in slow motion and then my notebook froze. I couldnt restart or shutdown so i just killed the power and when i turned it back on, all the i could see that turned on was the cooling fan. The screen remained black, and i cant get to safe mode or configure an other boot options. I dont have any warranty on my notebook so i would appreciate any help if possible. my video is for a project for one of my classes at school.
thanks a lot for any ideas
Does it boot up, but just go to black screen? If so, try connecting an external monitor. Check your keyboard for shortcuts that will switch between internal and external. Try leaving the battery out, and it disconnected for an hour.
Hi everyone I'm having trouble with my Acer laptop This is what happened I recieved an automatic update for IE I tryed it out I did not like the new settings So I tryed to delete it it said that I Vista Windows Screen after into System Blue Login goes Screen. Error Restore No do not have permission to do that So I did a System Restore to go back to IE and it looked like it was doing it's thing Then it went into the Blue Error Screen I turned my laptop off and then back on No Windows Vista Login Screen after System Restore goes into Blue Error Screen. after a minute or so Everything looked ok all the intros still come on but quot Windows Vista Home Premium bit Full Version Login Screen or Welcome Screen quot does not load at all Just stays on a blank black screen with the mouse arrow I tried using the F options on the laptop but they have not done anything so far SafeMode does not work and apparently there are no Restore Points anymore No Backups either Command Prompt still works I did a scan and it said there is nothing wrong but there is Should I get the full version of Windows Vista Install Disk and use the Repair option from there You know where the disk has options like Install Uninstall Repair I'm not talking about a Recovery Disk with the same F options as my laptop
Originally Posted by staypuft
Hi everyone. I'm having trouble with my Acer laptop. This is what happened. I recieved an automatic update for IE9. I tryed it out, I did not like the new settings. I tryed to delete it, it said that I do not have permission to do that. So I did a system restore to go back to IE8 and it looked like it was doing it's thing. Then it went into Blue Error Screen. I turned my laptop off and then back on after a minute or so. Everything looked ok, all intros still comes on but "Windows Vista Home Premium 32bit (Full Version) Login Screen or Welcome Screen" does not load at all. Just stays with a blank screen and arrow. I tried using the F8 options on the laptop but they have done nothing so far. SafeMode does not work and apparently there are no Restore Points. No Backups either. Command Prompt still works. I did a scan and it said there is nothing wrong but there is. Should I get the full version of Windows Vista Install Disc and use the repair option from there? You know where it has options like Install, Uninstall, Repair? I'm not talking about a Recovery Disc with same F8 options.
Can someone please give me an explaination on how I can boot a disc from a DVD drive. I'm unable to login to Windows Vista, do I use the Command Prompts to boot a disc?
Every time I play SC2, league of legends, or World of Warcraft. My whole screen will turn black, blue or grey in about 5-10 minutes. I currently use a graphics driver for my 8800M GTS is a nvidia driver 188.8.131.5246. If I install the today's drivers from nvidia.com, My screen will turn blue or grey right at the windows login screen.
Here are the dmp files that were created last night when it crashed while on Starcraft II last night for about 15 minutes. I do not know how to give you the information on the list of drivers I currently have.
Just checking if anyone has looked at my files.
Thank you for your help.
Hello Before i describe the problem i would like to make it clear that i would like to recover as much as possible This problem occurred playing a game called Empires V It is a steam half -death match mod I had problems in the past however i didn t not consider them problems the screen froze when the game changed map However when it froze it wouldn t respond to Ctrl Alt Delete or Ctrl Esc or the start menu button I pressed the power button and restarted it that way However this is when the problem occurs and i can t over come it It starts with a normal dell screen and the loading bar crosses at Blue Before Screen Fails Login To Screen All Start. Death. Of the bottom as normal Then it goes to Blue Screen Of Death. Fails To Start. All Before Login Screen a black page with a blue line across the top with white writing saying www dell com A line programming maybe Blue Screen Of Death. Fails To Start. All Before Login Screen it appears and disappears rapidly It then goes to a black screen saying something along the lines of We are sorry for the inconvenience but windows failed to start properly It then gives you options and no matter which option I choose I still get a blue of screen of death saying the following A problem has been detected and windows has been shut down to prevent damage to you computer If this is the time you ve seen this Stop error screen restart your computer If this appears again follow these steps Disable or uninstall any antivirus dick defragmentation or backup utilities Check your hard drive configuration and check for any update drivers Run CHKDSK F to check for hard drive corruption and then restart you computer Technical information STIP x x x E xc x It ends there I cannot access a log in screen I desperately need help if any additional information is required i will be glad to try and supply it Dell Dimension series About years old
Can you boot into Safe Mode? If so, try running chkdsk from Safe Mode.How to start Windows in Safe Modehttp://www.bleepingcomputer.com/forums/t/136855/blue-screen-of-death-fails-to-start-all-before-login-screen/
When ever I don't move my mouse for about 50 seconds my screen with flash to a dark blue screen, then I have 5 seconds to move my mouse before it goes to Windows Login screen.
I have no idea why or how I can fix this.
The only thing I can do at the moment is have Windows Media Player constantly on Reply which seems to stop it from doing it.
Your computer is likely having serious errors occur, which cause it to reboot. We'll need to change a setting so that it won't automatically reboot when it has such a serious error, but will instead show you an error message that can help you identify the source of the problem.
Disable Automatic Restart
1) Click on the Windows-7 Start button
2) Click on the Control Panel item on the menu to the right.
3) If your Control Panel view is set to Category: click on the System and Security item. [If your Control Panel view is set to Large Icons or Small Icons, go right on to step 4].
4) Click on the System icon.
5) Click on the Advanced System Settings in the left-hand menu.
6) In the Startup and Recovery section, click on Settings.
7) In the System Failure section, uncheck the checkbox next to Automatically Restart.
8) Click OK to save the change.
9) Click OK to exit the System Properties window.
10) You can now exit the Control Panel.
From now on, you'll see error messages rather than instantly restarting. Whenever you see such error messages, be sure to copy them down: they can help identify what's wrong.
But for the moment, we'll move on to a quick-fix try - using System Restore.
1) Start your computer in Safe Mode
---a) As your computer is powering on, start tapping the F8 key on your keyboard: this should produce the Safe Mode boot menu.
---b) Choose Safe Mode from the list (it will be the first item at the top).
---c) Login as an administrative user (if you are the only user of the computer, you are likely an administrative user), & enter your password.
2) Type System Restore into the Search box at the bottom of the Windows Start Menu.
3) Click on the System Restore icon that appears.
4) Choose a restore point from before the current trouble started
5) Confirm your choice, and let the restore proceed.
Should you continue having problems, especially error messages, copy them down & let us know.
Best of luck
. . . Gary
After doing a fresh install of windows xp home on my friend's HP laptop, she took it away and has been happily using it for the last week.
(Reason for fresh install was suspected infection)
Now, it starts and almost gets to the logon, but a two second blue screen with the message:-
"Begining dump of physical memory. Physical dump complete. Contact your system administer or technical support for further assistance"
It then reboots back to the safe mode options screen and will not boot into any of them.
She says it hasn't had a knock or fall, but the only time I've seen a message like that before was when it was due to a hardware issue?
My Computer recently has been Blue Screening so i factory reset it however it continues to randomly every hour or so freeze everything (cursor still moves) followed by a black screen (cursor still showing and moving). At some times it also instead just Blue Screens than restarts my PC. Help would be awesome I attached a BSOD reporthttp://www.sevenforums.com/bsod-help-support/396105-computer-freezing-times-followed-either-blue-black-screen.html
Hi all About months ago my computer was rebooting itself randomly At the time I had Win black screen w/ streaks Computer blue freezes I was Computer freezes black screen w/ blue streaks told by the person who created my computer that I needed a bigger power supply Recently I had the computer reformatted with Win XP SP and installed a new power supply Unfortunately that didn t solve the problem I went into Computer Properties Computer freezes black screen w/ blue streaks and unchecked automatic restart Now whether idling or online or checking email the computer will freeze and I get a black screen with jagged blue streaks From there I have to manually shut down the computer I got BlueScreenView and so far since I installed XP and put in the new PSU it s reporting crashes Here are my computer spec Mainboard BIOSTAR Group P M -M FE Chipset VIA P M CN VN PT Processor Intel Pentium E MHz Physical Memory MBDDR -SDRAM Video Card VIA Chrome HC IGP Family Hard Disk Western Digital WD AADS- S B GB Monitor Type AH - inches Network Card VIA Technologies VT Rhine II Fast Ethernet Adapter Operating System Microsoft Windows XP Professional Service Pack -bit DirectX Version If you would like what the BlueScreenView is showing let me know and I will post all crashes Any help is greatly appreciated nbsp
When I'm just randomly browsing the net my whole computer freezes and goes to a black screen with scattered blue squares. Some of the smaller squares move and the big squares stay still.
The mouse cursor is enlarged and stuck in the bottom left corner.
Nothing I press does anything, the only solution turning off my computer.
Can someone help me fix this,
here are my specs
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 2
CPU Type DualCore Intel Core 2 Duo E4400, 2000 MHz (10 x 200)
Motherboard Chipset VIA P4M900
System Memory 1984 MB (DDR2-800 DDR2 SDRAM) (I just added this 2gig recently I used to have 512 but I took it out to see if the problem persists and it does, so i'll be adding back my 512 soon)
BIOS Type Award Modular (05/02/07)
Video Adapter VIA Chrome9 HC IGP (64 MB)
i guess it looks like you have malware. maybe, maybe not
Due to a power cut earlier my PC naturally shut off the way you would if you switched it off at the plug.
It brought me into the windows error recovery screen and loaded until I reached the login screen.
Upon saying "Please wait" my screen begun to flash black rapidly and wouldn't load. The monitor wasn't going off or anything, the screen was just blinking.
It still does this every time I reboot my computer, so I can't log in at all.
It also does this in all safe modes so that is out of the question too.
Anyone know how to fix this?
Win Black screen on boot up before login screen I find some interesting posting in this forum Thanks for keeping this forum to help windows community I like to pick up the brain of this forum to resolved the black screen issue I am not sure whether it caused by virus I use Microsoft Security Essentials I am not able to run this in command prompt I started my laptop this morning amp login screen showed up Once I entered my login credentials I heard the sound that usually plays once a login is successful but I ended up with a black screen After this occurred I had to hold down the power button to manually shut down the computer Once I started it up again I was prompted to do a system repair which eventually ended up with all successful outcomes but login up, Win on Black boot 7: before screen? screen I now have a black screen with a cursor before the login screen now I have no idea what caused this to happen My laptop is a Lenovo Ideapad Model Z GB HD GB RAM I am not able to get into safe mode or any other mode which all leads to a black screen described above Only able to use the quot Repair Your computer quot tools after pressing F during booting Under regular user login it provided Start Repair option AS I pick Win 7: Black screen on boot up, before login screen? this option it did not find any issues Under Admin user login it provided system recovery options It is not picking up the recovery point created a while ago Windows Memory Diagnostics is not launching and shows a black screen without cursor I am able to get into command prompt I tried the following there I am not able to run cmd as admin I reviewed the past posting of this forum on this subject Windows boots to an unresponsive black screen with mouse cursor System File Checker Run sfc scannow amp analyze its logs in Windows Windows Resource Protection could not start the repair service How to analyze the log file entries that the Microsoft Windows Resource Checker SFC exe program generates in Windows Vista Force SFC to Run in Windows Windows Resource Protection found corrupt files but was unable to fix some of them SFC SCANNOW showed up quot Windows Resource Protection could not start the repair service I did quot net start trustedinstaller quot quot Windows Resource Protection detected pending repair restart the computer quot I ran repair options using sfc scannow offbootdir x offwindir D windows and got quot Windows Resource Protection found corrupt files but was unable to fix some of them quot I did findstr c quot SR quot windir logs cbs cbs Win 7: Black screen on boot up, before login screen? log gt sfcdetails txt I am not able to find any SR tags in sfcdetails txt This file is empty It is puzzling me Thanks for helping
From sfc /scannow command your windows is assigned D in recovery environment and perhaps %windir% is not recognized, so try the command:
findstr /c:"[SR]" D:\windows\logs\cbs\cbs.log >sfcdetails.txt
I'm running Windows 7 Home Premium.
As I brought my computer out of sleep mode the computer had crashed with the screen showing vertical, multicolored lines that vaguely resembled gray.
I had to hard restart my computer and after the splash screen, the login screen with all the users never appears, nor does my cursor.
Nothing is on my screen except a faint glow indicating that it's active.
Could anyone help me solve this problem? I've searched on Google but all the results have something to do with the cursor displaying.
I've already tried doing a System Restore and Startup Repair.
Currently posting from Safe Mode w/ Networking.
Update: Will start in normal mode after I switched drivers to Standard VGA, however updating the driver caused it to not work again.http://www.sevenforums.com/general-discussion/262942-black-screen-before-login-screen-no-cursor.html
This morning i installed the software for pinacale's usb tv tuner on my laptop. I was requried to reboot after the installation process completed. I got to the logon screen, logged in, and all i got was a black screen with a cursor, i then let the computer sit for 15 minutes my screen saver came on, but when i wiggled the mouse still only the curser so i hit ctrl+alt+del= nothing pressed the power button, agian nothing, pressed and help the power button for 6 seconds, the machine turned off, i let it sit for 30 seconds, turrned it back on and now it just goes straight to the black screen with a cursor. I have tried booting it in safe mode, safe mode with netwrork support, and safe mode with a command propmt all resulted in the same thing... black screen with a cursor, and after 15 minutes the screen saver comes on...............???????????????
I've got a problem with my Win install I recently bought a of instead screen + cursor screen login Black copy of Win Pro amp installed the -bit version as I intend to get more ram at some point fairly soon I installed it last weekend amp for a few days it's been running fine Then days ago when I start it up instead of Black screen + cursor instead of login screen a login screen all I have is a black screen with a cursor if I wait until the screensaver kicks in amp then move the mouse or press a key etc then I can see the login screen amp log in with no problems if I wait until the HD activity finishes amp then type in my password I can Black screen + cursor instead of login screen login fine Safe mode starts fine amp if I log in to normal mode then everything runs fine amp I don't get any other black screens At no point am I getting any errors I've run my usual AV Avira free version amp MalwareBytes Antimalware amp neither of them have come up with any issues Windows seems to be booting up fine until it gets to the login screen after the Black screen + cursor instead of login screen swirly windows screen amp it's obviously doing something as there's a normal amount of HD activity I've tried the Startup repair on the install disk to no avail I've tried post from this thread but things went a bit pear-shaped around the quot taking ownership quot bit though I've not had any errors afterwards I've tried enabling the OEM default background registry edit since it seemed straight forward enough to no avail I've even tried changing the background colours via the registry switch Hkey users default control panel colours Background from black to white The login screen is still there since I can enter my password amp get into windows it's just black on black on black which is somewhat annoying So I'm stumped since the vast majority of what google returns for combinations of quot win login screen black quot are issues where Windows goes black after loging in which isn't my problem I've also uploaded my ntbtlog though nothing really jumped out to my non-professional I'm an accountant amp probably know just enough to really screw up windows eyes Any ideas Or am I going to have to re-install windows a mere days after installing it for the first time though at least I do have everything I'd need to install afterwards saved And finally amp probably unrelated I seem to have mislaid the Search button thing on the start menu Any help with the blakc login screen would be much appreciated
Avira, no idea why it's showing as AVG, I've not had that installed in several years (& several re-installs including a reformat)...
Edit: Though googling avgntflt.sys says that it's part of Avira.
Hi everybody I'm kinda desperate with that problem i hope you can help me I installed Win Pro everything fine i installed some programs and the latest drivers from Nvidia i ran windows update so i rebooted bios screen was right and then it appeared the win screen with the window and the circle looping and right after that login GTX Pro screen 550 Black in Windows Screen 8 32. while i had to be in the login screen i just get a black but stuttering screen where i only can see the mouse pointer I restart in safe mode uninstall the Ti then i can reboot whithout problem Win detects the card and autoinstall the latest drivers and eveything is fine again and i'm able to play whatever i want until i have to reboot or shutdown again I need to uninstall the card from the device manager everytime i reboot if i want to have the chance of login again Apart from this everything runs fine So it Black Screen in login screen Windows 8 Pro 32. GTX 550 looks like the card works right but there is a problem with the quot welcome quot and login screen It's weird and frustrating and i would appreciate any help
The BIOS on your system dates from 2007. I'd have to wonder if this system is compatible with Windows 8
Many of your storage controller drivers date from 2008 and earlier - I'd have to wonder about those that are involved in any crashes, but there are no memory dump files to examine.
Lot's of errors about services not starting and Windows Updates not installing - but I don't speak Spanish so I can't be sure about the details. I must ask if this is a legal copy of Windows - as illegal copies have many of these same symptoms - and fixing them isn't something that we can do here.
So i was trying to extend my system partition using easeus partition manager and on restarting a black screen with movable cursor is there, no login screen. To clarify i can't access the task manager (no response) and same thing happens in safe mode.
I didn't have the windows 7 installation disc as i got this Windows pre-installed from laptop manufacturer so i used my win 10 installation disc to try and repair it. Startup repair couldn't fix anything chkdsk found nothing sfc scannow using offbootdir and offwindir did nothing. I don't have any restore points which i don't why happened because i just installed a win 7 update which created a restore point? Please suggest any solution short of repair install.
Ps i don't get last known good configuration option on boot menu only safe mode so don't suggest that
Thanks for your replies
Hi, I have recently installed windows updates and after restart the black screen occurred after I typed my password. About five days before that I have reinstalled my Mobile Intel 4 series driver and now in Device manager it shows 3 grayed out monitors which were installed when I have reinstalled the Video driver. The monitor driver that Is currently loaded was installed when I installed the OS itself. Is it safe to remove the grayed out drivers and will this fix my problem?
if you delete them after you press check for hardware changes will they reappear?
if so uninstall them hard then reboot your PC you might wanna create a restore point first in case some thing wrong happens, refer to this link if you dont know how:Create a restore point
I've got a fresh install of Vista x64, and when I install the Geforce drivers I'm not able to boot Windows normally. The green loading bar runs fine, but when it's over I don't get to see the login screen - it's just black. I have to enter into safe mode (which works) and uninstall the graphics driver.
The exact same thing is true for Windows XP 64-bit. But on WinXP the driver installation program caused huge lag also: http://forums.nvidia.com/index.php?showtopic=71101
Graphics: XFX 8800 GTX
Mainboard: Asus Striker II Extreme
EDIT: Bootlog attached.
I ran chkdsk and tried an older Nvidia driver, with no success...
I am running Windows XP Professional Edition SP3 and the issue is on startup after the Windows loading animation the screen goes totally black with no cursor in sight.
This happened after a power cut when the computer suddenly shut down.
I can run it in safe mode.
I can run another Windows XP Professional installation that I have on my PC (same HDD) and that works with no issues.
I used system restore (24 hours) and it starts up after that, but then after restarting it will not work. Same applies for when I did a system restore from 1 week ago.
All help is appreciated!
Any thoughts before I go and format the system?
I know this is trivial, but I want to run the science.scr screensaver on my W2K machine, I was able to copy it from an old Win95 Plus pack and install it on my machine, but it only displays the blue background when active. When I go into desktop settings and do a preview it displays fine with my background image, but when it fires all I see is a blue screen.
I have an Elitebook 840 G1 running Windows 7. I have updated the BIOS to L71 Ver 01.33, 9/1/2015 and it did not help. I normally run in a docking station with an external monitor - just cloned of the laptop display. I can open the laptop screen and see it, I can undock it at this time and it runs fine. However, if I undock it and either reboot or hibernate -- it will not boot or resume...just a black screen. As soon as I put it in the docking station, I see the HP BIOS banner and it takes off. So, it makes it more of a desktop than being able to use it as a laptop. Any ideas? thanks, greghttp://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/HP-Elitebook-840-G1-displays-black-screen-on-boot-return/td-p/5613791
so this have bin going on for quite some time thought i had it fixed but it came back again im pretty sure its not a overheat problem the cpu get to c and the gpu sometimes reach c the gpu has a fry point at c so it shouldn t Computer during blue up screens/Black screen/Locks gaming fail until it reaches c this happens to all my games and at different times sometime i can play an entire day without anything happening and sometimes i can just start the game Computer blue screens/Black screen/Locks up during gaming and it locks up blue screen black screen it can handle movies without anything happening tried running dmark for min but it passed fine and no crash occurred nor any error s ive looked in the even viewer witch says nothing about the computer crashing the cpu usage is at pretty much no matter what i do and i have lag on desktop sometimes dont think this is a registry or fragmented file error since i run advanced system care and Smart Defrag on a daily basis i got a new motherboard and new cpu for about months Computer blue screens/Black screen/Locks up during gaming ago months ago the crashing started happening and shortly after that my grafik card got toasted so i bought a new one and it worked fine for about a week then it started crashing again all my games are usually grafik intense but since it crashes i play on low don t know why since it crashes anyway one interesting note that doesn t happen every time is that the grafik is failing and everything becomes blurred lines when that happens i shut down the game and let the PC rest but this doesn t happen very often things Ive tried ignore it added more fans increased fan speed reinstall winblows bought a new hdd memtest found no problems hot cpu tester pro found no problems check for driver updates everything was up to date Seatools for winblows found no problems System Spec Motherboard Biostar GF M TE Power Supply Rasurbo Basic Power XII W Processor AMD Athlon BE Ghz Memory MB RAM Hard Drive Barracuda mb GB Video Card NVIDIA GeForce GT Monitor Fujitsu Siemens Amilo LSL W Sound Card Realtek HD Audio output Operating System Windows XP Professional SP computer s temperature at startup GPU c HD c HD c Core c Core c computer s temperature at passive usage GPU c HD c HD c Core c Core c dont know the temperature readings during gaming but when i started up the pc after a crash theyr at the same temp as the passive The heat readings are taken with Speedfan dont know what to do anymore please help note crashes only happens during gaming nbsp
I have a Windows Vista Home Basic 32-bit with too many programs downloaded.
I'm trying to uninstall most of them, but I don't even know if that's the problem.
I'm trying to record with Sony Vegas and it works for awhile, but then this black screen with checkered blue squares pops up and then my computer restarts.
If anyone can help me, I'd appreciate it.
This isn't my area of concentration, but I'll offer some suggestions because this topic hasn't been answered yet.
The video artifacts suggest a video card problem to me. Is this a desktop or a laptop?
If a desktop, open the case and check for dust clogging the cooler and to see if the fan on the card is working.
If a laptop, check to be sure the cooling fan is blowing air out - and then blow the ventilation ports out with canned air (don't use a vacuum cleaner or an air compressor as it can cause damage to the system)
Try these free video card stress tests:
FurMark download site: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit
Prime95 download site: Free Software - GIMPS
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.
Two other video stress tests (may be more stressful than FurMark):
Video Memory stress Test - ??? NVIDIA / ??????? / VMT
Artifact Locator - ??? NVIDIA / ??????? / Artifact Locator
Sorry, but I don't read the language that this website is made in.
Hi guys. I'm not to experienced with computers and software/hardware but hopefully you can help me out. (A friend recommended me here). My computer recently started crashing and the problem windows is saying it is is ''Blue Screen''. I've tried to restore it to a earlier time using System restore but that doesn't work.
The first problem is that when I play World of Warcraft and switch between WoW and Desktop that my computer will sometimes (Randomly) crash in the process of switching which all it shows is a black screen but i can still hear the sound. The second problem is that, again when im switching between wow and the desktop that it will just (Randomly) restart itself.
Hope i posted in the correct section ^^
Lets start with the basic's
Blue Screen of Death (BSOD) Posting Instructions
Hello I am trying to fix an HP G - DX Notebook PC Operating to safe From then screen screen and lock blue blink black mode, caps sys Win bit AMD Turion tm II Dual-Core Processor GB GHz I had this laptop since December of and on June of is when I used my notebook PC and was initially of no use I have been working on my laptop on and off since I am not afraid to open the sucker up and get this thing up and running The problem started out with what most ppl call it the quot blue screen of death quot Like most ppl I did ignore the blue screen and did a restart which brought me to the normal Windows screen From blue screen to safe mode, then black screen and caps lock blink and then it would start back up just fine I found this in Device From blue screen to safe mode, then black screen and caps lock blink Manager s Hidden Files Non-Plug and Play Drivers - ehdrv - epfwwfp - Security Processor Loader Driver I am not sure if it has anything to do with what it was the blue screen situation but I tried searching on the net on what it all meant and to see if I was able to fix it but before I was able to do something about it the blue screen kept From blue screen to safe mode, then black screen and caps lock blink popping up and it was getting worse The problem progressed to where on Windows startup it would just stop there blue screen would pop up and of course I had to restart it and do an F key press for Safe Mode I had to work on Safe Mode for a good couple of weeks before I can figure out the problem s I believe I had went into the system and found out it had something to do with some kind of error sigh I did write it down but that was like a month ago and I am unable to locate my notes It s frustrating being careless Any way my notebook PC will not start at all I did remove the battery and left the adapter plugged in to removing the adapter and doing a hard reset no justice The notebook would sound like it is about to start but all you can hear is the fan running and the lights with the caps lock blink sequence of ONCE every - seconds no beeping sound I may have changed something though I went as far as learning how to properly with the static free bracelette unscrewed the laptop apart to see if cleaning the fan would be the cause of it Nothing happened but instead of the caps lock blinking ONCE every - seconds it would blink TWICE every - seconds So I went back and checked if everything was put back together memory stick and such and now when i restart it it would BEEP times and the caps lock would blink THRICE every - seconds And so here I am Please help nbsphttps://forums.techguy.org/threads/from-blue-screen-to-safe-mode-then-black-screen-and-caps-lock-blink.1104596/
Hi I am having several problems with my computer wondering if I am infected with something First noticed the computer running slowly Then began freezing all the time Then noticed that when I switch to a new internet page at times I notice a small black screen that will pop-up or flash on the page but only for a second almost like you'd get on a quot run command quot type scrren if that makes sense Also I keep getting a security options failure It seems this only comes after the computer freezes and I try to hit alt control delete to bring up task manager I have tried to run Norton Anti-virus and spybot I've used CCleaner to remove unnecessary files clean The virus software finds in popping Infected? black screen and background, freezing Blue up slow screen, nothing unusual usually some cookies with tracking but no virus Any ideas Infected? Blue screen, black screen popping up in background, freezing and slow Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Windows Vista WinNT MSIE Internet Explorer v Boot mode NormalRunning processes C Program Files Norton AntiVirus Engine ccSvcHst exeC Windows system taskeng exeC Windows system Dwm exeC hp support hpsysdrv exeC Windows RtHDVCpl exeC Program Files HP HP Software Update hpwuSchd exeC Program Files Java jre bin jusched exeC Program Files Common Files Symantec Shared PIF B E DD - - c -B F- F FCA A PIFSvc exeC Windows System wpcumi exeC Windows System rundll exeC Windows System rundll exeC Program Files AWS WeatherBug Weather exeC Windows ehome ehtray exeC Program Files MSN Messenger msnmsgr exeC Program Files Common Files microsoft shared Works Shared WkCalRem exeC Program Files Windows Media Player wmpnscfg exeC Windows ehome ehmsas exeC hp kbd kbd exeC Windows system taskeng exeC Program Files Electronic Arts EADM Core exeC Program Files Internet Explorer ieuser exeC Windows system sdclt exeC Program Files Lavasoft Ad-Aware AAWTray exeC Windows explorer exeC Windows system wuauclt exeC Program Files Trend Micro HijackThis HijackThis exeR - HKCU Software Microsoft Internet Explorer Main Search Page http us rd yahoo com customize ycomp def www yahoo comR - HKLM Software Microsoft Internet Explorer Main Default Page URL http www yahoo comR - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http securityresponse symantec com avcenter fix homepage R - HKCU Software Microsoft Internet Explorer SearchURL Default http us rd yahoo com customize ycomp def www yahoo comR - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride localR - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName R - URLSearchHook Yahoo Toolbar - EF BD -C FB- D - F- D F - C PROGRA Yahoo Companion Installs cpn yt dllO - Hosts localhostO - BHO amp Yahoo Toolbar Helper - D -C F - EFB- B - ECA - C PROGRA Yahoo Companion Installs cpn yt dllO - BHO AcroIEHelperStub - DF C-E AD- -A -FA C EBDC - C Program Files Common Files Adobe Acrobat ActiveX AcroIEHelperShim dllO - BHO Spybot-S amp D IE Protection - - F - D - - D F - C PROGRA SPYBOT SDHelper dllO - BHO Yahoo IE Services Button - BAB B B- BC- B - D - FC DE A - C Program Files Yahoo Common yiesrvc dllO - BHO Symantec Intrusion Prevention - D EC - AAE- -AEEE-F F C - C Program Files Norton AntiVirus Engine IPSBHO DLLO - BHO SSVHelper Class - BB-D F - C-B EB-D DAF D D - C Program Files Java jre bin ssv dllO - BHO no name - E D - A- EC-A -BA D E E - no file O - BHO Windows Live Sign-in Helper - D - C - ABF- ECC- C - C Program Files Common Files Microsoft Shared Windows Live WindowsLiveLogin dllO - BHO Google Toolbar Helper - AA ED - DD- d - -CF F - c program files google googletoolbar dllO - Toolbar Yahoo Toolbar - EF BD -C FB- D - F- D F - C PROGRA Yahoo Companion Installs cpn yt dllO - Toolbar no name - EAB C -F EC- b -A BA-D BCAE C - no file O - Toolbar no name - BF - F - - - FE E AA - no file O - Toolbar ... Read more
Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructions that pop up for posting the results.Close the program window, and delete the program from your desktop.Please note: You may have to disable any script protection running if the scan fails to run. After downloading the tool, disconnect from the internet and disable all antivirus protection. Run the scan, enable your A/V and reconnect to the internet. Information on A/V control HEREhttp://www.bleepingcomputer.com/forums/t/250782/infected-blue-screen-black-screen-popping-up-in-background-freezing-and-slow/
Windows appears to load normally until reaching the logon screen at which point 2 quick cmd windows flash on the screen and i'm left with a cursor and a plain blue screen.
No access to task manager through ctrl+alt+del.
I was thinking it's a video card problem until i plugged in an external monitor and saw a windows error box pop up saying that the program running requires that you not be on battery power.
Pulled the drive and scanned with avast and malwarebytes which found nothing.
Inserted Vista DVD but the repair function is only able to find the HP Restore partition and is unable to locate any backups.
The system runs "mini XP" from Hirens Boot without a problem, but no diagnostics that i ran have been able to find any issues...
Hello and thanks for reading I have a year old HP pavilion dv series laptop running windows Yesterday I turned it on and it started normally but when I tried to browse on Firefox it gave me the blue screen for the first time ever and it shut down Fearing I had a virus I ran it in safe mode blinking Laptop blue cursor crash HP screen screen black with now and started a scan and began HP Laptop blue screen crash now black screen with blinking cursor transporting my pictures via Dropbox just in case it died on me Sure enough a weird error message couldnt HP Laptop blue screen crash now black screen with blinking cursor figure out what program made the message pop up popped up saying I had a bunch of urgent viruses I didn t click on it at all and before I couldn t think of what to do the blue screen popped up and it shut down When I tried to restart it the HP splash sign popped up and the screen flickered black and a blinking HP Laptop blue screen crash now black screen with blinking cursor cursor started in the upper left corner So this is where I stand now Black screen with blinking cursor Set default setting in BIOS didn t work and F safe mode or F system restore does nothing The black screen just stays there Any ideas Is it a gonner I m hoping to get back on and get my pictures if possible Help please nbsp
sounds like a bug -click report and ask to move to malware forum
Just today, I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : \windows\system32\config\system."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas anyone?
Thanks very much for your help.
It's a nasty error that requires some persistance and resourcefullness to overcome without a clean install.
If you have a Windows CD or have the recovery console installed, you might want to have a go at these directions.
Forum example of a successful recovery here:
Hi thanks startup, death Black at Solved: all blue with began screen screen a of for checking Solved: Black screen of death at startup, all began with a blue screen my question I haven t found an answer to my particular situation Dell xps m laptop w vista It all started with a blue screen w scrolling text after the fated restart The blue screen text said quot if this is the first time you ve seen this message quot and then comp restarted again showing the blue screen then restarted into windows repair mode after repair mode tried to fix Solved: Black screen of death at startup, all began with a blue screen the problem comp restarted then the screen went black blank right after the little windows loading animation where the bar keeps moving from left to right and there s a small windows logo It all happened fast so there may have been steps I forgot but that s the jist of it Now screen always goes black blank during startup after the windows loading animation so I can t start windows in normal mode I can start in safe mode if I manually force shutdown by holding the power button so I m not imploding with fear ok I am Possible causes This occured right after installing vista updates that restart was when I saw the blue screen Also occured the restart after running a patch called quot Vista TCP IP and UAC AutoPatch quot I downloaded it from softpedia the developer was listed as defcon and their website listed was securevista net but the site is down I found this out after the problem occured The patch had lots of positive reviews and lots of people on other sites also suggest using it to remove the limit of tcp connections which windows unnecessarily imposes Removing the limit supposedly increases P P filesharing speeds so it s a common approach to slow utorrent problems etc to patch the tcp sys file I have since quot unpatched quot it using the unpatch file which came with it but I m suspicious of the software developer now The patch originally disabled UAC user account control which is suspicious to me but I m not highly tech savy so I dunno if that s common or not I did also remove mcafee s security center I was busy I guess that was a mistake should always restart after each big change I apologize for the complication this creates in identifying the problem It s possible I did something else before the fatal restart if none of these three could be the culprit then I ll think harder about what that could be but for now these changes stand out in my mind I m assuming that windows repair mode s changes didn t cause this problem but I don t have any factual reason to believe that What could this be What can I do Thank you p s This is the last time I ever install software from a company that doesn t have an active website even if this wasn t the problem s cause nbsp
Hi I have a Dell Inspiron and today I suddenly got a blue screen error message the main message said quot PAGE FAULT IN NONPAGED AREA quot After rebooting I got the same message Then on the next reboot I couldn't get to the login screen I used my Dell error, 6000 on screen help! screen Inspiron Blue now - black boot, OS Recovery CD that I created to try and repair Windows XP It asked for a place to partition fragment Windows and then it went through copying files etc After that I tried to restart I got the Inspiron 6000 - Blue screen error, now black screen on boot, help! normal Dell Boot screen but then it went to a black screen with only a flashing cursor in the top Inspiron 6000 - Blue screen error, now black screen on boot, help! left hand corner I cannot do the Ctrl Alt F option to recover Windows XP I can only either choose F or F at the initial boot screen Please help I really do not know what to do What is the blue screen error message all about I haven't installed any software or hardware so I do not see what might of caused the problem Help
Do you have another windows xp cd you can get your hands on? I recommend performing a checkdisk repair on your computer and see if that helps.http://www.techsupportforum.com/forums/f10/inspiron-6000-blue-screen-error-now-black-screen-on-boot-help-231776.html
My problem started much like Screen/Blue problem Black previous Screen much Busybee poster, like that of Busybee with files being deleted orphan files being restored and security something or other however after reboot from CD and running Startup Repair the tests all appear to be OK except quot Root Cause Found - Volume on disk is corrupt quot Result Completed successfully Black Screen/Blue Screen problem much like previous poster, Busybee Error Code x At this point the pc goes through the never ending sequence of trying to boot up black screen then blue screen etc Medion MD Multimedia Home Entertainment Design Centre Operating System Windows Vista bit service pack C Gb Black Screen/Blue Screen problem much like previous poster, Busybee HD with D Gb restore using Gb Gb Ram Disk Black Screen/Blue Screen problem much like previous poster, Busybee failure diagnosis test result OK Most recent change made a day or so prior to the crash was retuning digital tv tuner when the changeover from Analog to Digital signal was needed to update channels here in UK The screen shows quot No Signal Analog quot at beginning and end of reboot sequence The black screen suggests this may be a recent hardware or software issue and advises removal of any recent changes but as I cannot get into the system let alone the control panel I am unable to remove or disable anything Would really appreciate being able to at least recover my files and as I am unable to access the operating system either by safe mode safe mode with command prompt or a normal reboot would welcome any advice about how I can achieve this I have a laptop also running Vista bit if that would be of any help in accessing the files Would welcome any advice on offer I am not a computer whizkid but reasonably competent user since Win Thank you for taking the time to consider my problem and I look forward to hearing any thoughts ideas solutions you can provide nbsphttps://forums.techguy.org/threads/black-screen-blue-screen-problem-much-like-previous-poster-busybee.1003191/
Previously it showed Blue Screen every time I boot my Y460; few seconds after the Window Logo. No matter how many times I reformate, it still showing Blue Screen, indicating STOP 0x00000116 and atikmpag.sys error. Subsequently, I went into the BIOS and changed the settings on the graphics switchable to discrete graphics. However its getting worst now because there is no display (totally black with no background light) every time I on my y460. Hence I need assistance and solutions, thanks.
closing duplicate, please respond at http://forums.techguy.org/windows-7/1117670-urgent-lenovo-y460-previously-blue.html
My laptop will not boot. I end up with an empty black screen or a blue screen with no icons, just a cursor. I get choices for 'normal startup' or ' repair' but not safe mode. Any help appreciated.
Hello JoLaRo and welcome to Seven Forums.
One of the Forum experts has prepared a couple of tutorials that might help you out.
Troubleshooting Windows 7 Failure to Boot
Troubleshooting Steps for Windows 7
If you're still having issues after following the tutorials, please post back.
Hi all Starting Messages, on Black startup Error with Screen Blue Blank Screen yesterday my computer would go through startup while loading the desktop it would crash to blue screen with white text unfortunately I can t remember the exact error Blue Screen with Error Messages, Blank Black Screen on startup message If restarted it Blue Screen with Error Messages, Blank Black Screen on startup either goes to a blank black screen or back to blue and I could only get the computer to operate in safe mode with networking My antivirus software avast free malwarebytes scanned and found no infections I have Windows Samsung laptop Today I was Blue Screen with Error Messages, Blank Black Screen on startup able to start the computer normally and am functioning with internet still acting a little funny but I am sure something is still not right I also did a system restore last night with the same problems crashing not starting up Any assistance would be highly appreciated Thanks in advance Brit PS I goofily started a similar topic in the quot Windows quot forum section without knowing this section was down here Sorry I tried to delete the topic post but couldn t Thanks
Hello,I will be helping you with your problems. Please be patient while I assist you.Some points for you to keep in mind while I am helping you to make things go easier and faster for both of us Please do NOT run, install or uninstall any programs, unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability. Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post. Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process. Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top of your post, click on the Watch Topic Button, select Immediate Notification, and click on Proceed. This will send you an e-mail as soon as I reply to your topic, allowing us to resolve the issue faster.NOTE: Backup any files that cannot be replaced. Removing malware can be unpredictable and this step can save a lot of heartaches if things don't go as planed. You can put them on a CD/DVD, external drive or a pen drive, anywhere except on the computer.NOTE: It is good practice to copy and paste the instructions into notepad and print them in case it is necessary for you to go offline during the cleanup process. To open notepad, navigate to Start Menu > All Programs > Accessories > Notepad. Please remember to copy the entire post so you do not miss any instructions.----------------------------------------------Please do the following:Please download the TDSS Rootkit Removing Tool (TDSSKiller.exe) and save it to your Desktop. <-Important!!!Double-click on TDSSKiller.exe on your desktop to run the tool for known TDSS variants.
Vista/Windows 7 users right-click and select Run As Administrator.If TDSSKiller does not run, try renaming it. To do this, right-click on TDSSKiller.exe, select Rename and give it a random name with the .com file extension (i.e. 123abc.com). If you do not see the file extension, please refer to How to change the file extension.Click on change parametersUnder Objects to scan, check the box next to Loaded modulesIf you are asked to reboot, then click Yes.NextCheck the boxes next to Loaded modules, Verify file digital signatures, Detect TDLFS file system, then click OK.Click the Start Scan button.Do not use the computer during the scanIf the scan completes with nothing found, click Close to exit.If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.
Note: If Cure is not an option, Skip instead, do NOT choose Delete or Quarantine unless instructed.A log file named TDSSKiller_version_date_time_log.txt (i.e. TDSSKiller.184.108.40.206_27.07.2010_09.o7.26_log.txt) will be created and saved to the root directory (usually Local Disk C:).Copy and paste the full contents of that file in your next reply.Download Security Check by screen317 from here.Save it to your Desktop.Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.A Notepad document should open automati... Read more
Previously it showed Blue Screen every time I boot my Y460; few seconds after the Window Logo. No matter how many times I reformate, it still showing Blue Screen, indicating STOP 0x00000116 and atikmpag.sys error. Subsequently, I went into the BIOS and changed the settings on the graphics switchable to discrete graphics. However its getting worst now because there is no display (totally black with no background light) every time I on my y460. Hence I need assistance and solutions, thanks.
I m having a problem with my Dell Dimension running Windows XP I have an g Maxtor HD as my main drive and a g WD secondary drive When I attempt to boot I get a blue screen with the message A problem has been detected and Windows has been shut down to prevent damage to your computer If this is he first time you ve seen this Stop error screen restart your computer If this screen appears again Screen Can't Black Blue (Standard Screen w/cursor Mode), boot then XP Windows Safe or follow these steps Check to be sure you have adequate disk space If a driver is identified in the Stop message disable the driver or check with the manufacturer for driver updates Try changing video adapters Check with your Can't boot Windows XP (Standard or Safe Mode), Black Screen w/cursor then Blue Screen hardware vendorm for any BIOS updates Can't boot Windows XP (Standard or Safe Mode), Black Screen w/cursor then Blue Screen Disable BIOS memory options such as caching or shadowing If you need to use Safe Mode to remove or disable components restart your computer press F to select Advanced Startup Options and then select Can't boot Windows XP (Standard or Safe Mode), Black Screen w/cursor then Blue Screen Safe Mode Technical Information STOP x E xC xF BB B xF E AO xF E AO FLTMGR SYS - Address F BB B base at F A DateStamp daAs far as the info in the message I see this screen with the same info everytime I rebooted As far as disk space my main drive is g aand I have about g of free space I m not sure if anything in the message refers to drivers Not sure how to change video adapters when I can t get into Windows Standard Mode or Safe Mode Also not sure how to deal with any of the BIOS suggestions or even know if it s a good idea to mess with it Again I cannot even boot to Safe Mode It takes me to the same Blue Screen message I have been able to boot from the CD I get to the Windows Setup screen it loads files It then says it s Starting Windows then takes me to the Windows XP Home Edition Setup It gives me the choices To set up Window XP now press Enter To repair a Windows XP installation using Recovery Console press R To quit Setup without installing Windows XP press F I pressed R and in the Recovery Console it shows C WINDOWSI press as this is the only Windows installation I have It then takes me to the Command Prompt C WINDOWS gt I have run CHKDSK and got this message The volume appears to be in good condition and was not checked Use p if you want to check the volume anyway kb total disk space kb are available bytes in each allocation unit total allocation units on disk allocation units available on disk I have also run CHKDSK r and it found and fixed one or more errors After I exited and tried to reboot from the HD and got the same BSOD with same message I don t know if this is a virus or hardware software problem I do have Malwarebytes Anti-Virus and Norton on the PC but without Windows XP I m not sure how to run them I have also booted from Hirems Boot CD and have run all the hardware tests checked HDs memory video etc I could and have found no problems Any light you could shed on this would be greatly appreciated Thanks in advance Dave
I received the following error message when I attempted to restart my computer:
C0000218 Unknown Hard Error
When I restarted after the blue screen it went into a check disk but would not finish the scan.
I have tried to start the computer in safe mode with internet connection and after a few minutes the screen goes black. I've tried to start it using last known configuration and the screen goes black. Everything I try ~ the screen goes black.
I'm writing from my husband's laptop because my desktop is completely dead.
We were out of town for several days and when we returned my desktop was running very slow so I attempted to restart it. It locked up, I pressed/held the power button and when it restarted it attempted to run a disk check. The disk check locked up and I had to press/hold the power button again. When it restarted I got a blue screen ~ stop: C0000218 unknown hard error.
Sometimes when I attempt to restart it I get: checking file system on C:
file system = NTFS
When I attempt to restart it in safe mode, safe mode with networking or starting in last known good configuration I get . . .
multi(0)disk(0)rdisk(0)partition(2)\windows\system32\drivers\ . . . (various items)
Now it won't start, not even in safe mode. Everything I try ~ I just get a black screen.
** I just tried to restart AGAIN and it ran disk scan, said it had completed disk scan and would restart, the screen went black when it attempted to restart and the screen is still black and it won't restart.
What can I do to get my computer back?
Any help will be greatly appreciated!
For the past several months I have been having problems with my HP desktop computer. When my system reboots I sometimes get a black screen with nothing on it or it gets stuck on the windows logo or I get a blue screen with a bunch of writing.
The blue screen tends to happen with the computer goes into hibernation. So I changed my settings to that it doesn't happen but I would like to fix that so that I can give my computer a rest during the time that I'm not using it.
I have checked for malware, viruses you name it... nothing.
Windows 7 SP1
Intel core i7 930 @2.80GHz
9.00 GB RAM
Kaspersky Internet Security 2013
If you need further info please let me know. ;)
ps I had wonderful support several years ago regarding my laptop.. thank you once again :)
I would like to fix that so that I can give my computer a rest during the time that I'm not using it.
The best way to do this is to simply turn it off; it will also save on the electricty bills too.
When I am not using my machine, I turn it off, because here in South Australia we have the second highest electricity charges in the world.
I get a blue screen with a bunch of writing.
Can you tell us what the blue screen says; usually this is due to a recent hardware or software change; however, in your instance it might be the Hibernation feature that is malfunctioning.
Post back with the information about the blue screen, please.
i am using hp pavillion nbsp g - tx last day i nbsp formatted nbsp my windows win ultimate so i downloaded all the drivers installed it after when i restarted after installing the graphics nbsp driver of AMD the screen nbsp are showed nbsp driver not properly installed after couple driver problem, blue ... display screen black out , screen then of minutes the screen will be black out and will be back in secthen after couple of minutes the screen will be turned blue with some display driver problem, screen black out , then blue screen ... writing nbsp and it will restart and happen the same process seeing this i went to safe mode and uninstalled the AMD graphics nbsp nbsp then restarted it then there was no screen black outs or blue screen but the laptop was working slow as mb ram but i am having gb ram i tried to install intel graphics then the answer was this laptop cant meet the nbsp requirements so i tried to install from internet nbsp site of AMD as well as INTEL but no change was done so i hope there will be a solution for thishttp://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/display-driver-problem-screen-black-out-then-blue-screen/td-p/5780896
This can happen at any time for me (including when I was re-installing windows in an attempt to fix the problem... did not go well ) but more often than not happens during web-browsing and especially when watching youtube vids. I'm going to assume it has something to do with my graphics card as the blue screen does not actually come up... instead the screen goes black and then I have to restart the computer. Anyways upon boot up and log in I get a windows message that tells me that windows has recovered from an unexpected shutdown ect.. and the numbers are:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057
Additional information about the problem:
OS Version: 6_1_7600
Service Pack: 0_0
Have you activated your Win 7?
Fully and completely update your Win7. Afterwards, I'll be asking you to submit a file which will show me all of the installed updates.
The update procedure will take qute a period of time since you do not have SP1 installed. This means there are updates to get you up to SP1 and then there about 100 updates post-SP1.
UPDATING YOUR WIN 7
1. ASSURE THAT YOU RECEIVE ALL UPDATES
WIN | type WINDOWS UPDATE | ENTER |
Change settings (left-hand column) |
checkmark all four of the boxes | OK button
Approve any dialog boxes presented. Let Windows install any update features.
WIN is the key with the Microsoft flag on top.
2. INSTALL CRITICAL UPDATES
Check for Updates (left-hand column)
Install ALL critical updates.
Restart your computer (even if not prompted)
Repeat this procedure until there are no more critical updates.
DO NOT TRUST the ?Windows is up to date? in center of dialog. until you see that TWICE IN A ROW!
3. INSTALL IMPORTANT UPDATES
Use the ?critical update? procedure until all important updates are installed.
4. INSTALL OPTIONAL UPDATES
Under Optional updates you will be presented with:
a) Microsoft Bing Desktop which is of questionable value
b) a list of about 34 language updates.
You can hide those updates so that aren't continually notified of those updates.
When you click on 34+ optional updates are available, then you
a) highlight all of the language updates,
b) right-click anywhere in the highlighted list.
c) click on Hide Updates,
d) OK button.
Install ALL other Optional Updates.
Use the ?critical update? procedure.
UPDATE GOLDEN RULES
Install ALL, yes, ALL updates.
This is Win 7 and not Vista or XP (eXPired).
UPDATE IS HUNG ?TAKING FOREVER
Hung is very doubtful unless you interrupted updates.
CTRL + SHIFT + ESC key combo will pop-up the Task Manager.
Lo and behold, Windows Update is still running!
You hold down the CTRL and SHIFT keys.
While holding them down, tap the ESC key once.
Hello I'm new here and I so hope someone can help me since I'm not the sharpest computer tool in the shed Screen,Blue Internet Screen,Error..HELP!! Explorer-Black This issue has started happening and I have no clue I have cleared cookies history etc but that hasn't worked Here's Internet Explorer-Black Screen,Blue Screen,Error..HELP!! the deal When I click Internet Explorer Icon of my desk top or go to start programs etc to open Explorer it seems as if it's going to open then the screen goes black for a second then a blue screen comes up and says quot An error has occured ctrl alt delete to restart click any key to continue to windows etc you know the one Well the error is this D FA I can click any key and return to desk top Can someone please help me The only way I'm able to be here is thankfully I have JUNO as my ISP and they have their own browser window Also in checking mail for instance in Hot Mail if I clicked a link in an e-mail to go to a certain page same thing black screen blue screen error etc It would be wonderfull if someone could maybe e-mail me step by step what I might could do xxxxxxxxxx xxxxxxxxxxxxxxxx xxx Thanks Carmen
Need more info.. Win98, ME. 2000, XP? SP1, SP2? What version of IE you are running? Post the full error message if you can. This would be helpful to an assistor. There is a fatal error somewhere but without this info it isn't likely anyone can help locate a fix.http://www.techsupportforum.com/forums/f56/internet-explorer-black-screen-blue-screen-error-help-43600.html
My screen came up the other day blue and saying it was checking disk and that volume was dirty. now the screen is black. computer acts like it is coming up but just sits there. Is there anything I can do?
First, backup your data using a bootable disk (such as a Live Linux or Ultimate Boot CD)
If the scan didn't fix the drive (if the drive is still marked as "dirty") then you'll most likely have to format the drive (and will lose everything if you haven't backed it up).
Then start with these free diagnostics (before formatting the drive):
I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link) - Test ALL of the hard drives.
If you find hardware issues, here's a link to the hardware forums: Hardware Support - Tech Support Forum
Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks
If you find malware, here's a link on how to post in the Security Center: NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum
New to the thread.... not sure if i'm posting right, soo correct me if u want =)
Anyway.. yesterday I turned my computer on and got the screen "Sorry for the convenience blah blah blah... Start Windows Normally, Safe Mode...ect.
I chose Start Windows Normally, which did indeed start windows normally, but I wasn't sure what caused this problem in the first place, so i ignored it. I turned my computer off.
Later i turned my computer back on and was confronted by another screen, this time a Blue screen.. A Stop error, can't exactly remember the error, but said something about "memory dump'...
I eventually got avoided a problem with this screen and got into windows.. However this morning, when i turn the computer on, I was forced to use 'Last Known Good Configuration"
Whats going on? I did scans on Norton, Adaware & Spybot.
Hi Kirstie, computers are great when they work huh? These stop errors and blue screens of death can have many causes. Sometimes they occur when a computer is getting older and some piece of hardware is going bad, like a memory stick for instance. Other times these errors occur after installing a new program or doing a windows update. They can be quite difficult to pin down sometimes as well. I would be glad to help you find the cause of the error if you will answer a few questions for me. By answering these questions I should be able to determine the cause and help you to correct it.
Here are some questions for you to answer that will help me. Just answer them the best you can and if you dont know an answer its ok. If you already answered anything I'm asking in your first post just skip over it.
1). What kind of computer do you have? Laptop? Desktop? Dell, HP, Ect?
2). Whats your level of experience? Novice, intermediate, expert, or dont know squat?
3). What operating system are you using? Xp Home or XP Pro?
4). What antivirus are you using? Are you using a firewall?
5) Please tell us a little about your computer. How old is your computer? What size Hard drive does it have?, processor, ram, Bios ver. Ect.
6). Do you have an Xp disk for this computer?
7). Does your computer have a floppy drive, CD drive, Ect.?
8). Do you have access to another working computer with an internet connection?
9). Did you noticed this problem occuring after installing anything recently?
10). Has your computer done a windows update recently?
11). Have you made any changes to the computer recently? Hardware or software?
and anything else that might help us help you. Remember we are trying to help from a forum so all we have to go on is what you can tell us.
I will monitor this thread throughout the day. If you resolve this problem on your own or with the info I provided please let me know so I can move on to other issues. Also please mark this thread solved using the thread tools option located at the top of this thread and selecting solved from the drop down menu when your computer is working correctly and you are through with this thread.
ok so i was trying to put some videos onto my blackberry bold and i started to play with my phone while it was attached to my laptop and i accessed my media files with my memory card in the phone and all of a sudden i got a blue screen that said restart your computer and some other stuff that i didnt really understand so i manually pressed the power button until my laptop turned off then restarted it. it rebooted as tho it had been in standby not restarted and all i could see was the windows explorer window i had had opened before the screen and the rest of the screen is black. i guess i could attach a picture if it would help ???? thank you very much for your timehttp://www.techsupportforum.com/forums/f10/screen-is-black-except-for-the-window-i-had-open-prior-to-blue-screen-394478.html
hello!. i have Aspire4750g windows7 HB 32bit. after the "Starting Windows" (the one with their logo). It normally displays a BLACK SCREEN but it is just for 1-2 seconds. But in my case, the black screen in my laptop after the "Starting Windows" takes 5-10 seconds! what the? Is there a problem?
It all depends upon the speed of the hardware.
Hello there, I'm Callie. On May 7th I purchased a Dell Inspirion 5559. As of yesterday on Thurday June 9th, I have noticed an issue with my webcam. Unless it's in front of a direct light like the sun or a light pointing towards the webcam, my webcam displays a black/blank screen. Here are a couple examples.
In front of window/sunlight.
Moved away from window/sunlight [but still lights on in the room.]
Here is a good source when troubleshooting Webcam Issues.
The Screen is black, blank or dark
A blank, black or dark screen can be caused by low light conditions or if the webcam is in the wrong mode. Make sure to use the webcam in a well-lighted area.
Adjust the brightness setting in the Skype software, for more information refer to the Skype website.
On Skype, select Tools> Options >Video Settings > Webcam settings
Then move the sliders for brightness and contrast and see if it helps.
The blue screen says something is corrupt and wont load windows or something due to error. I'm not sure how to fix this or if this is the right forum. please help?
Thanks for your time,
Blue screens produce things called minidumps. If you can, go to C:\windows\minidump. Minidump files have a .dmp extension. Select all the files with a .dmp at the end. Right-click and send these files to a compressed(zipped)folder. Upload that folder as a file here
Need advanced phone support at (816) 510-9475.https://social.technet.microsoft.com/Forums/en-US/3a3f4a39-602f-463b-8ccd-0dc3623de27f/during-an-upgrade-from-windows-7-to-10-my-computer-went-into-a-loop-with-a-black-and-blue-screensr?forum=MTCWin8
My splash black screen windows screen blue now to laptop is a Dell Inspiron with windows splash to black screen now blue screen XP Professional The laptop was given to me used no original cd s or anything just the machine and power cord just letting you know that right off the bat as I don t have option to put cd in as I don t have it The laptop has a XP sticker on it that doesn t state if windows splash to black screen now blue screen it was home or Professional windows splash to black screen now blue screen to start with I say all this because I can t tell you if the OS was preinstalled or after market installation IN case this matters any I am not knowledgeable about computers without the aid or forums like this so please know that when offering aid I ll need specifics please Recently my system malfunctioned and YourHighness helped me get it cleaned up It was working fine for a few days All of a sudden the Windows Splash screen disappeared and the screen went black After multiple reboots and selecting Function F eventually the computer would go to a grey screen and then would finish booting fine This went on for a week or two Meanwhile as YourHighness suggested I bought more RAM as it only had MB I read it can go up to a gig so I bought used from eBay a and installed it Booted fine after the black screen issue still and worked fine A couple of days later I went to boot it back up and got a blue screen saying quot Stop C Bad Image CheckSum The Image MSAN dll is possibly corrupt The Header Checksum does not match the computed checksum quot I can not boot to safe or any other option I can only access bios and am clueless what to do once there if anything I tried recovery counsel booting but it just refreshes the options screen essentially it only recognizes the XP option I removed the RAM in case it was causing the problem Tried to boot with just a and also with s Still got same blue screen I don t know what to do from here Do I need to take it to a repair shop or can someone guide me through some options Please advise Most appreciatively Thatguy
I would think that your first priority, assuming that your data is safe, is to obtain a means of reinstalling/repairing XP. I mean, that would be my first priority if I intended to run a system with XP on it and I did not believe that the system would run perfectly until I decided to retire/sell/junk it.
So my first suggestion would have been...contact Dell and inquire about recovery/restore CDs for your system.
As for your apparent option of taking it to a shop...that won't resolve the fact that you have no install disks of any type.
I've not ever seen an XP sticker that doesn't indicate which flavor of the O/S is installed.
I am running windows 7 Ultimate 32 bit and facing with a big problem,I suppose.
-Black screen sometimes appears after windows is starting(after this)
-Blue screen of death always appears when I am trying to connect for more than 7/8/9/10 times on some of wireless networks,and very rarely appears when I'm playing a game or doing something on the internet.
-Some programs freeze sometimes such as Firefox,DivX Player,Winamp...
Please help me guys!
So for the past 2 weeks I've been crashing none stop usually after playing game for about an hour or just browsing or watching a movie, its a mixture of Page fault in none page area, Memory management, IRQL not less or equal, among others. I don't know whats causing the crashes or any help would be greatly appreciated. i had this laptop for since early december 2009.
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Turion(tm) II Dual-Core Mobile M500, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 3836 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series, 320 Mb
Hard Drives: C: Total - 291444 MB, Free - 24376 MB; D: Total - 13495 MB, Free - 2249 MB; F: Total - 99 MB, Free - 95 MB;
Motherboard: Hewlett-Packard, 3642
Antivirus: Norton Internet Security, Disabled
Have you installed anything lately? There could be some program or service doing something that isn't needed.
How's the case temperature? Perhaps it's running too hot.