Windows Support Forum

No display after switching to a new case

Q: No display after switching to a new case

So I decided to swap my computer's case for a another tonight. I believe everything is hooked up properly, all of the fans are running, lights are on, disk drive opens etc. But, my monitor fails to recognize that it is attached to a computer. I tried switching to another monitor and my TV with no avail. I figured it was most likely an issue with my graphics card so I switched over to the on-board adapter instead but had no luck there either.

I'm using the same power supply from my other case, a brand new 450W PSU. Everything ran completely fine before the switch.

I'm totally stumped as to why my computer won't give off any video feed, anyone have any ideas?

Relevancy 100%
Preferred Solution: No display after switching to a new case

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: No display after switching to a new case

Although some cases do not require motherboard standoffs because they are built-in, are they required in the new case and if so, did you install them?

http://www.techspot.com/community/topics/no-display-after-switching-to-a-new-case.154874/
Relevancy 21.07%

My Friend has a HP Pavilion DV2000 Laptop. His display isn't work. Suddenly display gone. But I thought it could be Display problem not a VGA. So, i tried to connect an external monitor and used Shortcut keys to change the display. I pressed fu + F1 or Fu + F2 or Fu + F3 or Fu + F4 up-to F12. But no result.
I couldn't check whether it's a Display or VGA card problem. IS there any other way to check it. in addition to these is there any other combination keys to Change the display to an external monitor. I'm unable to check whether i get login or not. if I can login then i can use Windows Key + P. Then i can select mode. But I'm Unable to anything here. Please help me to find the problem and i have to take it to repairing shop.
Thanks in Advanced
 

A:Change display of laptop to external monitor

It should be the Fn + the key that shows a monitor symbol. If it still doesn't display, the motherboard video processor has failed, and not the LCD Panel
 

http://www.techspot.com/community/topics/change-display-of-laptop-to-external-monitor.168817/
Relevancy 21.07%

Hello,

I have been using the same set up for just over a year now and yesterday my monitor (which is just a TV with a HDMI port) stopped receiving signal.

I can boot up the pc and get the BIOS, which I can go into and see everything fine, as well as the windows loading icon but when it would normally go to the log in screen I get nothing.

I can however plug in an extra monitor (an actual Samsung monitor) with a VGA cable and it all works fine and on top of that if I connect the TV at the same time it works perfectly fine as a second monitor.

However if I try to turn off the VGA monitor and just use the HDMI TV then I get no video signal again.

No idea how to get my main TV monitor working again. Totally stumped.

OS: Windows 8.1
Processor: Intel Core i5-4570 CPU @ 3.20GHz
RAM: 8.00GB
Video Card: GeForce GT 620
MOBO: Asus Ranger VII
PSU: Corsair 500w
Monitor: Technika 22" HDMI + Samsung SyncMaster 2032 VGA
 

http://www.techspot.com/community/topics/monitor-no-video-found-when-main-display.215571/
Relevancy 20.64%

Infinity displays are all the rage among notebook buyers these days. Dell's XPS 13 (2015) was an excellent example of what's possible when it launched earlier this year and now, they're bringing the gorgeous screen to its bigger brother. ...

Read more
 

A:Dell's revised XPS 15 includes gorgeous Infinity display, Windows 10

What's an Infinity screen?... Short answers please, I'm not interested enough to Google it.
 

http://www.techspot.com/community/topics/dells-revised-xps-15-includes-gorgeous-infinity-display-windows-10.213699/
Relevancy 21.93%

In dxdiag option and in Display option all 3 acceleration options are not available in my pc. But I had installed the drivers and hardware for graphics then too it showing not available. Can anybody tell me how can I enable all those 3 options. I have Standard VGA Graphics Adaper.
Here is screenshot for reference -

 

A:Display Drivers Not Available

And Only Because Of That I am not able to open any game or sofware which requires display graphics. Any suggestions are most welcomed.
 

http://www.techspot.com/community/topics/display-drivers-not-available.214649/
Relevancy 27.95%

Evening, all

I bought an interesting little Single Board Computer as an mITX motherboard (a WADE-8020, more info at the link below):

http://www.ebay.co.uk/itm/Portwell-...766?pt=LH_DefaultDomain_0&hash=item3a9b75151e

I have another similar board in an old Hoojum Cubit 3 case, and was wondering if anyone might have any other suggestions for a similarly eye-catching case, probably ready-made, though I'm not averse to either buying a DIYed case, or maybe trying to make one myself (I have a Dremel but not much else, and that includes skill )

Cheers, Jon.
 

http://www.techspot.com/community/topics/case-suggestions-for-industrial-mitx-board.213745/
Relevancy 21.07%

Up until this point, Asus has been solely focused on producing G-Sync monitors for the gamers out there with Nvidia graphics cards. However this is set to change, with the company preparing to release their first FreeSync monitor, the MG279Q. ...

Read more
 

A:Asus joins the FreeSync market with 1440p, 144 Hz IPS display

Finally a good IPS monitor. I got tired of seeing so many TN ones.
 

http://www.techspot.com/community/topics/asus-joins-the-freesync-market-with-1440p-144-hz-ips-display.211255/
Relevancy 21.5%

I have uploaded a video of my laptop to better show the problem:

I am thinking something is wrong with a connection or some cable just don't know which. Never fixed a laptop. I broke the panel before I figured out the screws were hidden behind tiny black covers. Also broke the metallic part of the screen on the right side but I guess I will crazy glue it somehow. My most important issue is the flickering.

If anyone knows how to fix this issue please let me know I would really appreciate it.

At certain position the screen doesn't flicker, mostly if it's set back at a greater than 90 degree angle.
 

A:Laptop display flickers

It's sensible to check the connectors to the screen but unless you find a video of how to get inside your particular laptop and study it you are highly likely to break other pieces too. I worked out how to take mine apart thanks to Google but although I was careful I still broke a connector. Putting that right took me ages.
 

http://www.techspot.com/community/topics/laptop-display-flickers.213067/
Relevancy 21.5%

Hello,

I need some professional help.
My computer:
AMD a10
4fb RAM
R9270x BY XFX
....
NOW, without the graphics card the computer runs fine. When I install the ddriver's for the r9 it will work, but eventually the display driver stopped working makes its way back.

I've ran all diagnostics on the memory and checked temperstures which all turned out to be fine.

I sent the card into xfx and they returned it saying it's fine.

WTF DO I DO MATES. I think it's the card....but that's just me.
 

http://www.techspot.com/community/topics/amd-and-display-driver-issue.212301/
Relevancy 21.93%

I could use some advice. My second monitor just died, and I would like to find a replacement with a few specific features.

27 inch
Adjustable White Point
As low as possible wattage

As I understand it, having a white point that is adjustable separately from brightness and temperature controls provides a better way to dim the white without dimming other colors. If I am not understanding this right, please correct me. The reason for looking into this is because of my eyes being sensitive to light. If I could, I would replace all white that comes through my monitor with a light tan. That's how bad it is. So, if there is a way I can better adjust how bright the white is, I'll probably take it.

The low power I want for reduced heat. With two screens this size, heat is obviously a problem. So far, I have only found that reducing wattage will have a noticeable decrease in heat. If there is something else, feel free to clue me in.

Thanks all!
 

http://www.techspot.com/community/topics/choosing-appropriate-display.212194/
Relevancy 21.07%

hello techspot, I keep getting this error when I play games in my computre. what should I do to fix this error?
 

A:Display driver stopped responding and has recovered

I get this error every once and a while. Updating your GPU drivers usually solves the issue. Do you know what GPU you are running? Post your full system specs below and then we can go from there.
 

http://www.techspot.com/community/topics/display-driver-stopped-responding-and-has-recovered.204745/
Relevancy 20.64%

Acer announced two new gaming-grade 27-inch monitors at the Consumer Electronics Show last month. The XB270HU garnered the most media attention thanks to its IPS panel and Nvidia G-Sync technology. What Acer neglected to mention at the time, however, was...

Read more
 

A:Acer's 27-inch XG270HU display will ship with FreeSync support

Those bezels are awesome! I wonder how much it'll go for though...
 

http://www.techspot.com/community/topics/acers-27-inch-xg270hu-display-will-ship-with-freesync-support.208917/
Relevancy 28.38%

Hey guys,

I am in love with the CM Stryker case however its fulltower so its rather big.

Does anyone know if I can get a similar case in medium size?

Thanks! ( Yes I tried googling already )
 

http://www.techspot.com/community/topics/case-like-cm-trooper-stryker-but-smaller.209005/
Relevancy 21.5%

I came home one day to find that my monitor was no longer displaying my PC via HDMI. After a lot of testing, I've found that the monitor works with other PCs via HDMI, and my PC works with other monitors via HDMI, but they don't work together. All I get is a black screen. I know that my PC's resolution is set to one that my monitor can display. I've tried several different cables. I have absolutely no idea what the issue might be, and I'm pretty much at my wit's end here. Any ideas?
 

A:Strangest display problem I've ever had

Have you tried different projection modes? Windows will remember set profiles for specific monitors. It is possible the the projection mode was turned off for the monitor, and will stay that way until the mode is changed.

For Windows 7 press "Windows Key + P" to bring up the projection menu.
 

http://www.techspot.com/community/topics/strangest-display-problem-ive-ever-had.207904/
Relevancy 21.5%

Hello,

I remote into my home PC from work using the Chrome Remote Desktop tool. It works well. The problem is the screen resolution. The monitor I use at work isn't the same as the one on my home PC. This causes the resolution to be a little blurry and images to be slightly small.

When I disabled my monitor completely at home, the resolution was clear and it worked well. I just unplugged the monitor from my PC. Is there a way to completely disable a monitors input without having to physically disconnect it from the PC? I've tried disabling it in the Device Manager and that didn't do the trick. Any suggestions?

Thanks,

Speck
 

A:Disable Display when remoted into a PC

HMM; every hacker would just love such a solution. Don't think this should be pursued.
 

http://www.techspot.com/community/topics/disable-display-when-remoted-into-a-pc.207501/
Relevancy 21.93%

Getting rid of emi on screen when using vga input?
 

http://www.techspot.com/community/topics/vga-display.207510/
Relevancy 21.5%

I run two displays. When I got up this morning, one of them is on but black. When trying to adjust my display settings, it comes on briefly (maybe 3 seconds) and goes right back off again.

System specs are as follows:

Operating System
Windows 7 Home Premium 64-bit SP1
CPU
AMD Athlon II X2 255 45 C
Regor 45nm Technology
RAM
4.00GB Dual-Channel DDR3 @ 535MHz (7-7-7-20)
Motherboard
eMachines EL1352 (CPU 1) 49 C
Graphics
VE205 ([email protected])
VE205 ([email protected])
256MB NVIDIA GeForce 6150SE nForce 430 (Acer Incorporated [ALI])
Storage
465GB Western Digital WDC WD50 00AAKS-22V1A SCSI Disk Device (SATA) 48 C
Optical Drives
ATAPI DVD A DH16ABSH SCSI CdRom Device
Audio
USB Audio Device

Using Sabrent USB-DH88 USB Display Adapter also

I have checked all drivers and windows shows they are up to date. Both displays were fine as of about 1 AM this morning, and to my knowledge no updates or downloads were done during this time.

Any help would be appreciated; I work from home and having dual monitors is almost critical.
 

A:2nd display black screen

Try changing cables first, by some chance the cable has gone bad.

Sounds like it could be a lighting issue within the monitor. If it is a backlight issue, the monitor will still be displaying an image. You will not be able to see the image without some kind of lighting. If you can use a flashlight to expose the image, you would at least know it is a backlighting issue. I've been able to use this technique on phones as well as monitors.
 

http://www.techspot.com/community/topics/2nd-display-black-screen.207214/
Relevancy 21.5%

I have been looking around and cant find a cut and dry answer to my problem.

What I'm looking to do I set up 6 monitors on 2 gtx 980's. My question is if its possible to have 3 monitors running in landscape as well as 3d and the other 3 as separate workspaces. Or can you only get 3 total monitors to work with nvidia 3d. And it gets more complicated when SLI comes into the picture since I would like to maximize my cards. But correct me if I'm wrong, SLI essentially turns my 2 cards into 1 not allowing me to utalize all the video ports on the 2nd card. Meaning I won't even be able to accommodate 6 monitors? I may just have to do without SLI.

So again. 3 monitors in surround 3d. 3 monitors not inside the 3d or surround environment. Off of 2 Gtx 980's. Possible? If not is there a way to accomplish this with other hardware.

Thanks for your time. SF
 

http://www.techspot.com/community/topics/6-monitor-display-without-sacrificing-3d.207179/
Relevancy 28.38%

Hey guys I was looking at case suggestions mini-ITX redoing a build as a mini-itx so it would be more in the question to carry it somewhere if need be This is my alternative to getting a laptop as a primary mini-ITX case suggestions computer and ill be gettiing some sort of cheap portable tablet laptop for college work So I was looking for mini-ITX cases that would be best for my situation Alot of them are cube-like and im not a fan I would prefer something that I could put my xbox on top or vica versa Not that id definately be doing that but thats generally what form factor I want I also need to be able to fit like at most a GTX in it I know thats asking alot but alot of the cube cases can do mini-ITX case suggestions it all mini-itx cases ive really seen are too slim or to cube like and that makes it feel clunky to move anywhere Id really like to have the most efficient PC case possible Ive got a corsair c build right now and it just doesnt work at college as well as id want Oh yea my budget is at max Looking further im starting to think I won t be able to get a build small enough for what im looking for and I guess thats understandable I guess I should say my PSU budget is so it either needs to support a normal PSU or have a smaller one in that price range and wattage amperage that can run a non overclocked i and a GTX nbsp

A:mini-ITX case suggestions

I am doing a second mini-itx and the case does not seem to be working. the first case is no longer available - I posted pics here - it was all acrylic/clear - over the long term, it turns out that the acrylic broke at the power-on button and where the power supply meets the back of the case.

You might want to look at some that are for video - they have a low, flat profile like a DVD player.

You can get one that will accommodate a pico-psu power supply. This is a laptop-style power supply, with a barrel connector to connect to the computer.

This connection needs to be figured out before ordering parts. The right pico-psu will connect right into the ATX power supply plug, just like the plug coming out of a regular ATX power supply. But the barrel connection needs to be supported by the case.
 

http://www.techspot.com/community/topics/mini-itx-case-suggestions.206075/
Relevancy 24.08%

Hello everyone - I have just assembled a new build It will not power up I need a suggestion to figure out if the problem is the case or the motherboard This is a mini-itx build power-up: power New or Build MB? no supply case's The case is New Build no power-up: case's power supply or MB? Linkworld LC - B This case comes with a volt watt external laptop-style power supply that plugs into the rear of the case just like New Build no power-up: case's power supply or MB? a laptop power supply plugs into a laptop - a barrel connector Inside this power connection connects to a power supply component that is not like a regular ATX power supply but is on a printed-circuit board New Build no power-up: case's power supply or MB? mounted on the case This has several capacitors and other stuff From that comes the -pin and -pin power supply lines for the motherboard I assume the -volt power supply for this external power supply unit is right since it came with the case It was watt The processor is an IBM t with TDP of watts Lower-powered CPUs can be put in a small so I assumed the power supply might be under-powered I ordered a -watt volt power supply with the right size barrel - and same polarity pos inside The MB is an ASRock H MV-ITX It is mini-itx form factor Still same problem Everything is connected correctly When I press the power-on button an external CD drive I have plugged-in spins up for a while But no power light comes on in the front of the case there are no POST beeps the fan for the CPU does not spin up No other signs of life So power is getting into the MB - the external CD drive is plugged into a USB socket in the rear panel of the MB After trying a watt and watt power supply I believe the problem cannot be the power supply cord Can it be that I have too little load I don t think so I plugged in another mm fan and an ol-fashion floppy drive just the power connection to add more load - same thing no power-up no POST nothing but the CD drive will spin up when I open-then-close it yet again So here is the help I need what else can I try -assuming the MB and case are fine is it more likely the case power supply is bad or the MB --Thanks nbsp

A:New Build no power-up: case's power supply or MB?

Well, I figured out the problem.
I am planning to re-do the older mini-itx system I have; it has gotten riddled with Trojan software for kids downloading games; it basically has been de-commissioned already.

So, I took the pico-psu power supply from that older computer, and hooked it up to the one I am making. Everything went perfectly.

So, I un-did that, removed the MB from case, disconnected the barrel-power connection from the case, unscrewed and removed the power supply that had been mounted in the case, put the pico-psu power supply back in place (I had to drill the hole for the barrel-connection out to be a little bigger since the pico-psu internal/external connection is threaded and held in place by nut with lock washer), and routed wires to be clear of cpu fan, screwed MB to stand-offs, and closed it all up.

now, everything is great. I like this linkworld case, but the power supply is worthless. I may try to get a few dollars back from the ebay vendor, to make me happy with a case that is less than what I should have gotten, but is working for me; I don't want to wait on returns, etc.
 

http://www.techspot.com/community/topics/new-build-no-power-up-cases-power-supply-or-mb.206259/
Relevancy 21.5%

I usually connect the vga cable from my monitor to the port on my gpu,but for some reason it doesn't display anything now.

I tried to locate the source of the problem by doing these

1) Connected the vga cable from my laptop to the monitor, and it displays the laptop's content just fine so the monitor/cable isn't the issue.

2)Connected the cable to the vga port on my samsung smart tv and to the slot on my gpu and my desktop boots and functions just fine.

3) I opened up my cpu cabinet and dusted the ram and the video card and put everything back in place but that didn't help either.

I don't have a DVI cable with me so I can't check if that works and I don't have another similar monitor either I can test it on other than my tv.

Video card: AMD HD6770

Monitor Samsung 23'S22B series
 

A:Monitor powers up, but does not display

Is the port you're trying to get video out of active? It might be turned "off." Just a thought....

Mike
 

http://www.techspot.com/community/topics/monitor-powers-up-but-does-not-display.202749/
Relevancy 21.07%

The video is 1 min and 14 sec, yet only the couple first seconds is enough to understand the problem. what could be the problem for?

as you can see, half of the screen display colors correctly, the other half, the colors and texts and smudged, they are there but smudged and not applicable to read or view
 

A:LG G2 IPS display weird problem - video for explanation

Can you still RMA it, or did you do something that is not covered by the warranty?
 

http://www.techspot.com/community/topics/lg-g2-ips-display-weird-problem-video-for-explanation.203474/
Relevancy 21.5%

I want to record from a webcam, mounted on a vehicle.

I need to use 2 displays, 1 for the camera fullscreen 7? display (HeadsUp), and the other displaying the software controls.

Any suggestions for the hardware/software?

Mac OS preferred but can go with PC
 

http://www.techspot.com/community/topics/two-display-webcam-recording.203677/
Relevancy 21.07%

Ok I m not the best and building computers and am very new at it My fresh build will boot but display absolutely nothing on the it like except everything Fresh display all powers at should build, no on monitor monitor by nothing I mean it won t even go to bios or turn the power light from standby to on This build will boot up all fans will run with no problems including cpu and video card fans and everything will shut Fresh build, everything powers like it should except no display at all on monitor off by holding down the power button properly Also I have not gotten any light or beep codes Here is what I have asus m a motherboard amd fx -core processor black edition asus gtx ti direct cu video card ddr gb Fresh build, everything powers like it should except no display at all on monitor x gb MHz dual corsair vengeance ram watt xion xio power supply sata tb barracuda hard drive dvd cd - writable drive cm storm scout case I have tried trouble shooting programs for the motherboard and video card with no results I have tried resetting the rtc ram I have double checked the power plugs are plugged in properly and making a proper circuit I have taken everything out except the motherboard cpu cpu fan and power supply and still gotten no beeps I have tried changing how the stupid speaker wire connects connecting incorrectly according to the manual and still no freaking beeps I have tried using hdmi and vga cords connected to my tv that supports pc s and a monitor nothing worked cord wise but my old pc worked like a dream when connected to them when talking to tech support for the motherboard they helped me check that it wasn t a grounding issue I have talked to all my pc buddies called tech support and no one can tell me anything i haven t tried or that has worked I have no idea what is wrong I need help I have spent the last two day all day working on this with no clue what is happening nbsp

A:Fresh build, everything powers like it should except no display at all on monitor

do you have the monitor cable plugged into the GPU or MOBO?
 

http://www.techspot.com/community/topics/fresh-build-everything-powers-like-it-should-except-no-display-at-all-on-monitor.178244/
Relevancy 21.5%

When I power on my Toshiba equium a200-151, the screen lights up but no display at all - even though there is loading activity. I rigged up to my PC monitor and everything is fine - see bios and windows loading etc. Borrowed a spare compatible working screen but same problem. I'm not 100% sure if its the inverter or the ribbon connector - any ideas before I buy a new inverter? Thanks for looking.
 

A:Lcd lights at power on but no display

I would say that the video cable (ribbon cable) is bad based on what you have tried so far. This cable goes from the motherboard to the LCD display. Did you use the old inverter off the suspect Toshiba when you tried the compatible spare LCD panel?
 

http://www.techspot.com/community/topics/lcd-lights-at-power-on-but-no-display.203111/
Relevancy 30.53%

I am using a very old and slow MPC computer running Windows XP.
Someone gave me [out of pity] a 3 year old E-Machines computer running Windows 7. [beggars can't be choosy].
Anyway, how can I safely get my data from my old PC to the newer one?
I am not the sharpest tack in the box, so if you can tell me how to do it in simple terms, I sure would appreciate it.
Thanks guys.
 

A:Switching information from PC to PC

Doctor Gallop said:





I am using a very old and slow MPC computer running Windows XP.
Someone gave me [out of pity] a 3 year old E-Machines computer running Windows 7. [beggars can't be choosy].
Anyway, how can I safely get my data from my old PC to the newer one?
I am not the sharpest tack in the box, so if you can tell me how to do it in simple terms, I sure would appreciate it.
Thanks guys.Click to expand...

Someone else may have a better idea, but if you have a large enough flashdrive, save it all to that & transfer it.
I don't know if you could use TeamViewer for that or not .
 

http://www.techspot.com/community/topics/switching-information-from-pc-to-pc.201854/
Relevancy 28.81%

Ok,guys.I need a suggestion about what case to get,my budget is up to 60$.
Looks are not important, the most important things are to have 1 fan or more,good cable managment and good build quality.
Thanks.
 

A:Budget PC case?

The Corsair 200R meets all your needs, but unfortunately, after Corsair released their new Spec budget cases, they raised the price of the 200R from $50 to $70.

So if you want a nice case for <$70, Corsair has some nice options you can check out >>here<<. I would watch unboxing videos on the Spec cases before purchasing since I am unsure if they would suit your needs (I am not too familiar with them since they are new). If you decide on a case, I recommend buying them from either >>Newegg<< or >>Amazon<<.

If you are interested in an unboxing of the 200R, check it out >>here<<.
 

http://www.techspot.com/community/topics/budget-pc-case.201421/
Relevancy 30.53%

Hey guys,

Just signed up although I have been following these forums for a few weeks now

Just after some advice. Basically I have the FX-8350 but I'm looking at switching to Intel (specifically the 4770k) as I've been told it's better for the GPUs I have, currently running dual-290x setup. Someone said the 8350 causes a lot of bottlenecking and that I would get a lot more out of them if I switched to the 4770k? Can anyone attest to that?

Cheers
 

A:Switching to Intel

The 8350 is more than enough. The i7 could gain you a few frames per second (FPS) depending on the game (somewhere from 5 FPS to as much as 15 FPS). I would keep the 8350 until more attractive CPU options come out like Haswell-E or the next generation of AMD FX CPUs or even the 5th generation of Intel's i7.

The reason I am saying this is because the 8350, while it may not perform as well as the 4770K (not by much), the 8350 completely serves your needs and there is no need to upgrade to a 4770K at this moment since it wont bring you that much of an improvement.

I hope this helps.

-JC
 

http://www.techspot.com/community/topics/switching-to-intel.201143/
Relevancy 28.38%

Acomdata Model with WD AAJB drives installed System Dell Optiplex with Windows XP-Home Acomdata driver installed Two identical by computers different 4 recognized HD not case of IDE Acomdata 509 any New in cases and drives neither was recognized Objective to format these brand new IDE drives New IDE HD in Acomdata 509 case not recognized by any of 4 different computers Drive configured as Master Master with Slave New IDE HD in Acomdata 509 case not recognized by any of 4 different computers and Slave the only evidence of New IDE HD in Acomdata 509 case not recognized by any of 4 different computers movement of disk Pink light was when installed as slave As MASTER or Master w slave No pink LED at any time Reset as MASTER An identical second Acomdata box with a second new WD AAJB drive behaved exactly the same It was not recognized in the Dell Initially the Device Manager USB list showed a yellow warning for a USB Mass Storage Device Uninstall and reinstall hardware made no difference A subsequent repeat of uninstall reinstall caused the yellow warning to disappear When the drive was reinstalled a small screen popped up in the Notification area telling me that new hardware had been found My Computer Open - eventually showed H as well as W X Y Z the card readers At that time Device Mgr USB Mass Storage had no yellow warning any more Storage Disk Management did not show H at that point An internal inconsistency ----- When I tried to FORMAT from the OPEN drop down menu H was shown to be inaccessible Tried the Acomdata drive system on an iMac and two functioning Sony Vaio PCs running Windows None could see the external drive Microsoft and other sites had all the same ineffective directions for taking care of the Code Cannot start this device MS blamed it on a device in one place Nothing to do with a device No one mentioned anything about how the HD should be set up while Acomdata s instructions were to set it up as a Master which I did After spending several hours on this with these two new WD AAJB drives and two Acomdata cases no success --- Contacted WD support for help via E-mail They responded that they do not support the drives unless directly connected to the mother board I e they did not know or have any idea either Searching the Internet the problem shows up very frequently for many people regardless or PC make or Windows OS When I first acquired the Acomdata case it worked OK I actually installed Windows XP pro on it with some files That drive is not recognized either in that case any more Different PC nbsp

A:New IDE HD in Acomdata 509 case not recognized by any of 4 different computers

Addendum: One of the drives is in a 509 Combo case, so I tried the 1394/Firewire connection.
Result: with the 1394 connection, the PC hung up during booting at the Windows screen.
Checked the BIOS and it looked ok. Safe mode booted OK, but the drive was not visible in My Computer-->Open; Device Manger, or in My Computer--> Manage-->Disk Management.

There seems to be no way to recognize this case or its USB only 2nd unit.
I cannot believe that both Acomdata cases developed defects in storage.
 

http://www.techspot.com/community/topics/new-ide-hd-in-acomdata-509-case-not-recognized-by-any-of-4-different-computers.200984/
Relevancy 21.93%

Hey Guys,

I have Toshiba satellite laptop, but suddenly its screen starting showing like this...Can anybody help me to fix it. Thanks


 

A:Display Problem

This is an indication of a broken LCD panel. Probably caused from dropping or putting something heavy on the closed laptop. The LCD panel will have to be replaced
 

http://www.techspot.com/community/topics/display-problem.199637/
Relevancy 28.38%

Couple days I got new a case Corsair Graphite 230T Orange. I installed mother board P8Z77-V LX, new cooler Evo212. I THINK I installed the motherboard right in the case. I had to remove 1 pin that was blocking the placement of the board.

http://tinypic.com/view.php?pic=pvyjc&s=5#.UuQzWxA1iUk
 

A:New case possible short circuiting home

There is 1 board mounting post that needs to be left out from time to time. I even believe I've seen phenolic, or some type of composition pins to be put in that position.

If you look carefully at you board, you may be able to spot the position, by the lack of ground tracks running to it.

Best I can do. BTW, I don't really trust any thing to do with "tinyURL" or similar links. No offense intended.
 

http://www.techspot.com/community/topics/new-case-possible-short-circuiting-home.199656/
Relevancy 28.38%

Hi, I have a Corsair 550D and was going to get a h100i because I didn't realize I could put the H110 radiator on the side panel and have it exhausting air.

So let's say that's what I do, I have the H110 rad on the side panel exhausting air. That leaves me with the rear fan, the two top fans, the two front fans and the bottom fan. What configuration would give the best cooling with the H110 rad on the side exhausting air?

Thanks
 

A:How should I set up my case fans with a H110 rad on the side?

Well, mounting it on the side is an interesting choice but could work just fine. You have to remember though, hot air rises so you must keep that in mind when building your system.

If I was doing this, here is what I would do:

Front Fans Intake
Bottom fans Intake
Rear Fan Intake
Top fans Exhaust
Radiator Exhaust

That will keep a steady flow of cool air over your components. That in my opinion will be the best setup.
 

http://www.techspot.com/community/topics/how-should-i-set-up-my-case-fans-with-a-h110-rad-on-the-side.198986/
Relevancy 28.38%

For Christmas I got another mm case fan aerocool shark rpm and I tried mounting it at the top of the case to suck out hot air as I have intakes and exhaust already but I couldn t seem to get the right screws to screw it in at the top my case aerocool fan cooling Case question strike x gt came with long screws for the top of the case but they are too thin to screw into the fan So instead I mounted the new fan on the side door on the top fan slot by the CPU as an intake and today when I played a new game that I got for Christmas BF I noticed the CPU temps would get rather hot I am using the stock intel cooler bear that in mind I was getting a max temperature of about degrees C after a roughly Case fan cooling question hour gaming session Would I benefit from making the new fan an exhaust by the CPU or would I be better off or is there a secret way of mounting a fan up there at the top as an exhaust that I son t know about as I imagine that way would be the best way to do things Also my graphics card could handle BF at all max p with FPS Thanks EDIT - To clarify I have intakes at the front one rear exhaust and the new fan as an intake on the side door by the stock CPU cooler nbsp

A:Case fan cooling question

hopgop1 said:





For Christmas I got another 120mm case fan (aerocool shark 1500 rpm) and I tried mounting it at the top of the case to suck out hot air as I have 2 intakes and 1 exhaust already but I couldn't seem to get the right screws to screw it in at the top, my case (aerocool strike x gt) came with long screws for the top of the case but they are too thin to screw into the fan. So instead I mounted the new fan on the side door on the top fan slot by the CPU as an intake and today when I played a new game that I got for Christmas (BF3) I noticed the CPU temps would get rather hot (I am using the stock intel cooler, bear that in mind) I was getting a max temperature of about 80 degrees C after a roughly 2 hour gaming session. Would I benefit from making the new fan an exhaust by the CPU or would I be better off, or is there a secret way of mounting a fan up there at the top as an exhaust that I son't know about as I imagine that way would be the best way to do things. Also my graphics card could handle BF3 at all max 1080p with 60+ FPS. Thanks. EDIT - To clarify I have 2 intakes at the front, one rear exhaust and the new fan as an intake on the side door by the stock CPU cooler.Click to expand...

With stock coolers, the fan on the intel cooler is pulling the air through the heat sink off the CPU and into the case away from it. By putting a fan blowing air down on the CPU, you are pushing the air back onto your cpu thus keeping the hot air hovering around it.

I would suggest swapping to exhaust.
 

http://www.techspot.com/community/topics/case-fan-cooling-question.198885/
Relevancy 28.38%

I had no idea card could be some gigantic, that blows my mind, I can't wait to see the thing!

The problem is I never checked the size of the card to see if it would fit in my case, it won't.

What I would like as suggestions are names of cases long enough from front to back to fit 40cm card but no higher then 58cm as that's the height from the bottom of my desk to the top. (it does leave like half cm gap at thetop, not cool I know). If it's possible to get a case to fit the card that can also fit under my desk that would be excellent.

Edit: BTW, I'm getting a Palit Jetstream GTX 770 4GB.

Edit 2: I am actually now unsure of the length of that particular card, I keep find contradicting numbers.
 

A:Looking for a case to fit a 40cm card

I'm not sure I understand the request. Why would you need a 16 inch card slot? A 16 inch card slot would be outside of specifications.

Physical card dimensions




Full-size card

The original "full-size" PCI card is specified as a height of 107 mm (4.2 inches) and a depth of 312 mm (12.283 inches). The height includes the edge card connector. However, most modern PCI cards are half-length or smaller (see below) and many modern PCs cannot fit a full-size card.Click to expand...


 

http://www.techspot.com/community/topics/looking-for-a-case-to-fit-a-40cm-card.198814/
Relevancy 21.5%

Hello! I'm having no luck with previous threads regarding this same question.

For starters, I just bought two new items for my computer so it's not entirely new, but quite the upgrade

Previous Specs:
PSU: 500w
CPU: AMD Phenom II x4 965
GPU: nVidia GeForce 660
MOBO: Biostar A880GZ
RAM: 8GB

New Specs
PSU: 500w
CPU: Intel Core i7-4820K
GPU: nVidia GeForce 660
MOBO: BIOSTAR TPOWER X79
RAM: 8GB

I boot it up and hear no beeping sounds all fans are running well. I believe I have everything in place. I can provide pictures if needed.

Thanks in advance!
-Adrian

Bumping with my PSU: http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Maybe there are some extra plugs I need in the PSU that my current one isn't offering?
 

A:PC turns on; Monitor won't Display

Recheck all your connections. Plus make sure your video card and memory are seated. The PSU should be fine.
 

http://www.techspot.com/community/topics/pc-turns-on-monitor-wont-display.197972/
Relevancy 21.07%

Hi

I have a printer
There is no lighting up
The power supply give
red wire about 7 V
blue wire about 11 V

Holding down the power button en stop/reset won't work

How can I test the logic board is defect?

Image logig board






Cheers
Harrie
 

http://www.techspot.com/community/topics/canon-printer-pixma-mp610-no-power-no-display.197978/
Relevancy 21.93%

Ok so I have a computer about months old I have always had it hooked up to No Display my tv with an hdmi cable Well I switched that hdmi cable over to my xbox I then switched it back to my computer and now nothing is displaying on my tv I tried restarting and removing power supply and nothing seemed to work I took the computer monitor out of my sisters room and hooked it up to my PC and nothing displayed there either The monitor would just say going to power saving mode I know that the VGA wire is connected correctly because when I remove it the monitor shows a message saying quot no vga detected going into power save mode quot and when I plug in the vga it just simply No Display say going into power save mode I tried pushing keys on keyboard and moving mouse and such and nothing happens anyone know whats happening and how No Display to fix this nbsp

A:No Display

Please list your computer specs. This will help someone assist you better.
 

http://www.techspot.com/community/topics/no-display.197714/
Relevancy 28.38%

Anyone else have trouble with these fans in regards to their reliability? I bought over $100 worth of Aerocool's Shark red edition (of the 120mm and 140mm variety) case fans and a little over a year later the bearings are already starting to go. These fans seem to have a good reputation and they aren't exactly cheap, so I'm surprised that they are giving me these problems.

Two of the 120mm fans started grinding\buzzing all of the sudden and it was very annoying. A month later one of the 140mm fans started doing the same thing. This isn't something that goes away after lubrication and I can even feel it rubbing when I spin the fan manually. They utilize fluid-dynamic bearings so I would have expected them to last a lot longer.
 

A:Aerocool Shark case fans

I have these:
http://m.newegg.com/Product/index?itemnumber=N82E16835129061
They are the Aerocool shark 140mm red edition (3 of them) and I've had limited problems. Two are mounted on a 140mm radiator vertically and they have had zero problems. The third is a bottom intake mounted horizontally and it's had a few minor issues. So far for me they are working fine and sounding good, the bottom one just had this odd grease appear on the fins which I cleaned off but it's still silent like the others.

I have not tried dissembling them yet, but if they are rattling, check if you can rma under warranty or try greasing them yourself.
 

http://www.techspot.com/community/topics/aerocool-shark-case-fans.197057/
Relevancy 28.38%

Hi all,
I am planning to build a new machine and am wanting to start with the case,,,was wondering if I will strike any difficulties installing old hardware into a new case (apart from the front USB 3.0).
I have been looking at firstly the Gigabyte Sumo Omega here then after I found that I could not get a supplier here in Aus. Struck upon the SilverStone brand here which I should be able to purchase Downunder.

Would it be possible to install in a newer case ? (not planning on going to a smaller form factor) this current Mobo configuration GA- 8KNXPUltra FJ Ultra (with DPS) -Gigabyte-,,?
Thanks in advance
 

A:Building a new machine starting with case

Whoa a Pentium 4:

Well yes I don't see a problem with that as the screw configs have not really changed and most cases come with tons of different screw holes for all sizes of motherboards (Its normally the Extended ATX boards that are harder to satisfy).

You should not have a problem grabbing a new case and putting your old components in, they will fit in a normal sized case with ease!
 

http://www.techspot.com/community/topics/building-a-new-machine-starting-with-case.196653/
Relevancy 27.95%

Hey guys Excuse my lack of proper harddrive Problem WD with external case changing terminology I am new to these things Recently my gb WD external hard drive had the USB port connection on the hard drives circuit board break off So Problem with changing WD external harddrive case I went and bought a new case from my local computer shop I had originally taken my HD to see if they could solder the usb port thing back on to the circuit board but they said they don t do repairs So he looked at my HD and told me which case would be best for it I come home and follow his instructions and remove the circuit board from which the usb port fell off from which also supplied the power and connected to the SATA power port on the HD and put it in to the new housing When I connect it to my laptop it does not show up under My Computer However in my icon tray it shows a USB device has connected and it gives me the option of removing it safely I can hear the HD starting up when it gets plugged in but nothing else happens When I removed the HD from its new case and put the old circuit board bit back on and manually held the usb with the usb port connection on to the circuit board from where it came off from I am able to get it recognized by the computer and the WD software for the password prompt starts up So I know my HD is functioning I just cant get it to function in its new case Any help would be much appreciated Thank you nbsp

A:Problem with changing WD external harddrive case

Is the new case powered in the same way as the old case? If yes, I would return the case.
 

http://www.techspot.com/community/topics/problem-with-changing-wd-external-harddrive-case.196556/
Relevancy 28.38%

Hi all,

I'm quite stuck on getting a PC case which will help with cooling. I'm looking for the best case at cooling in the 70 range. The case has to be big enough for graphic card upgrades (I currently have 5850 XFX Black Editions in crossfire). Examples of cases I've looked at are the Carbide 300R, HAF 912 Plus and Fractal Design R4. Please can anyone advise of the best case (in this class?) in the UK. I'm happy to add additional case fans to get better cooling!
MB is ATX, BTW.
 

A:PC Case advice for better cooling (budget @£60-£80)

Well since im going to assume air cooling I have a couple of options that I personally like for those types of systems:

NZXT Phantom Mid Tower

Corsair 400R or the 300R are both great options

There are many more but those are a few near your price point I recommend. I like the NZXT Phantom cases the most because of their room, expandability, and overall sleek look.
 

http://www.techspot.com/community/topics/pc-case-advice-for-better-cooling-budget-%C2%A360-%C2%A380.196120/
Relevancy 21.07%

Hey everyone I idle monitors display Dual PC after anything won't occasionally is ve been having a recent issue with my monitors and it s really been stumping me lately I recently acquired a nd Yamakasi x monitor from South Korea I love these things and while the monitors themselves are working quite well I ve been having an issue since I connected the nd one Occasionally maybe - of the time when the PC has been idle for long enough that Dual monitors occasionally won't display anything after PC is idle the monitors have turned off when I come back to the PC and move the mouse or press a key on the keyboard the monitors turn back on and I am promptly greeted with a black screen on both however it appears that there IS a signal as the monitors turn on and remain on however that signal is just a blank black screen I ve got both monitors beside each other and the one on the left side is plugged directly into the dual link DVI port on the back of my master in my crossfire configuration The right-side monitor is plugged into an active displayport to dual link DVI adapter which also requires a USB port for power When I notice this black screen effect I also notice a small thin blueish bar spanning the height of the right monitor at the far right side of the screen this bar looks about the same thickness as the side edge of an open window in Windows but I ve never been able to tell if that s what it is or not UPDATE Upon closer inspection of the quot blue bar quot I can now tell that it doesn t look quite the same as the Windows side edges of a window It does span the entire vertical length of the screen it s about - pixels wide fairly bright blue and the far left or right seems to be random as to which it is column of pixels is a brighter blue than the rest Also the line isn t QUITE at the far edge of the screen it s offset from the edge by about another - pixels When I get this black screen effect the mouse cursor will never appear and no matter what I do including pressing control-alt-delete nothing else will ever appear on the screen If I press the power button I can see and hear my PC doing the usual process that it does when Windows goes through a normal shut-down which is the current setting for the functionality of the power button and then it turns off like normal Upon restart the issue is gone of the time until the PC is left idle again except that the right-hand displayport adapter monitor is not recognized by Windows upon reboot until I unplug and replug it I m running Windows Professional and I just freshly reinstalled Windows on a blank solid state drive within the last two weeks It appears to me that Windows is still running just fine since it seems to shut down normally and it looks almost as though the black screen is a huge window that is stretched almost fully across my monitors with only the far right edge visible and without any way to interact with this window However I also wonder if it could be an issue with the dual link display port to DVI adapter because every single time upon restart of the PC after this issue occurs it only recognizes the left side monitor and won t recognize the right one until I unplug the adapter from the displayport and reinsert it Obviously I don t want to be unplugging and replugging my monitor on a daily basis so I m wondering if anyone has heard of a similar problem or what I could possibly do about this Thanks in advance everyone nbsp

A:Dual monitors occasionally won't display anything after PC is idle

Update: I've discovered that usually the problem can be solved by unplugging and replugging the displayport adapter while the PC is on, but only if the aforementioned "blue line" is present on the right-hand screen when I move the mouse. Yesterday, I had a similar issue except that instead of turning back on and detecting the PC's video signal which is just a black screen for both of them (with blue bar on the right one), the monitors (both of them) refused to even acknowledge that there was a signal coming to them at all and wouldn't even turn their backlights on or wake from sleep mode. Even when I hooked up 2 different monitors using standard DVI-D single link or dual link cables, I still could not get any video signal to output at all, to ANY monitor.

Turning my speakers on, I found that I could hear the Windows 8 "device connect" and "device disconnect" sounds when I unplugged or replugged either of my 27" monitors, but nothing at all was heard when attempting to switch to other monitors. This tells me that Windows IS detecting and seeing the monitors, but somehow the video signal is just not reinitializing properly after the computer turns the monitors off after idle time.

The only solutions I've got at the moment are to set Windows to NEVER turn my monitors off, or to shut down the PC every single time I'm done with it; neither of these solutions are particularly pleasing to me. Please let me know if anyone has any advice at all, even if it's just an idea that may or may not work out.

BTW my PC specs are:

2500K currently at stock settings
16 GB Patriot DDR3-1333
MSI Z68A-GD55 B3
2x Radeon HD 7950 also currently at stock settings
120 GB Vertex 3 (OS/main apps drive)
1TB WD Blue
1TB WD Black
1000W Cooler Master modular PSU

 

http://www.techspot.com/community/topics/dual-monitors-occasionally-wont-display-anything-after-pc-is-idle.196256/
Relevancy 27.95%

My iphone 4S can not support whole day use as the battery nearly drain .

So I searched iphone 4S external battery in amazon and find Plush cartoon toys power banks AD below. The price is 29.99$ a little expensive as its 5200mAh. T

http://amazon.com/Constellations-Thunderbolt-Incredible-Blackberry-Fashionable/dp/B00DJ3DZK2 (avoild link, delet url space when past in IE)

Also I found a external battery case here :

http://www.amazon.com/Power-External-Protective-Battery-iPhone/dp/B00409E4JK/

The battery capacity is only 1700mAh but can be used as a case protector for iphone 4s

Which one I should bought or

do anyone find the similar high capacity like 10000mAh but cheaper one in ebay buy.com or amazon and other place?
 

A:Power bank or external battery case?

Before you invest in more equipment, try to reduce power consumption (see this)
 

http://www.techspot.com/community/topics/power-bank-or-external-battery-case.195897/
Relevancy 21.5%

Please help. I have just purchased a HP Pavilion p62480ea desktop PC. This all worked fine out of the box.
I also purchased a Geforece GTX 650 Ti graphics card - when I put this in I'm getting no signal on my monitor - using HDMi and DVI cables. (I also installed a new 430w power supply)

When I take the graphics card out and go back to the GPU on the motherboard everything works fine.

I've read that going into the BIOS and turning off delete/uninstall the video driver in device manager>>>turn off computer>>>install the graphics card - has worked for others.
I've tried going into the BIOS but I'm getting no signal when I restart this way.

If anyone could help it would be greatly appreciated.
 

A:No display after upgrading video card

Did you connect the six pin PCI-E power connector from the power supply to the graphics card?
 

http://www.techspot.com/community/topics/no-display-after-upgrading-video-card.195568/
Relevancy 28.38%

I read online that some people, while making their server build, had to drill holes in the case's back plate or just buying another case. I was just wondering if with this case and motherboard, I would have to drill holes because I know that with server motherboards there isn't really a standard. Thanks to anyone who helps out!

Case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811147155

Motherboard: http://www.newegg.com/Product/Product.aspx?Item=N82E16813182182
 

A:Server Motherboard with case help

You need to find a rack that can support E-ATX motherboards (extended ATX). Do you need a rack? Or is this just a workstation?
 

http://www.techspot.com/community/topics/server-motherboard-with-case-help.195224/
Relevancy 28.38%

What the title says. I am looking for the best air mover for the lowest sound in that range. Im not expecting close to the best I can get at all.

I dont care about sound THAT much, but my PC now gets rather loud under load and I just want to make sure a bunch of fans (5 or 6) wont contribute to noise.

Oh and also, I just want 2 blue LED ones-im getting a corsair C70 and that already comes with 3 fans so I should be plenty set after that
 

A:Best blue LED 120mm case fans for $15 (each)

I recommend these:
Xigmatek XAF-F1256
Cooler Master JetFlo 120
Cougar 12CM
Enermax Vegas Duo - Haven't tried this, but people say it is a good fan. It has 2 colors also.

These are cheaper, but more noisy options:
Rosewill RFA-120-BL - recommended over the CM one below
Cooler Master 120MM Blue LED
 

http://www.techspot.com/community/topics/best-blue-led-120mm-case-fans-for-15-each.195161/
Relevancy 21.07%

Hi im pretty good with problems but this one is doing my head in now the problem is im not sure what the actual problem is the symptoms include corrupted desktop display game crashing corrupted firefox display these symptoms are not continual and dont Corrupted game crashing desktop display, appear after boot up ati smartgart reports agp is off adjusting it makes no difference the system is old but has been very reliable mobo is asrock i gv with onboard vga cpu dual core intel mem gb o s xp pro sp graphics card ati radeon mb agp directx all drivers are current including chipset drivers things ive done reinstalled graphics card and drivers and onboard vga drivers ive tried using the onboard Corrupted desktop display, game crashing vga without the radeon installed but have same problem have disconnected all usb devices but no change have tried other hdds with xp pro o s and still have the problem this makes me think its a hardware problem mobo perhaps have checked forums but no help anyone have any idea any help would be appreciated its got me baffled the worst symptoms are when trying to start games and these games are old and according to their requirements this system is well above the recommended they recommend pentium or above thats how old they are lol oh and I have a superfast modern pc but this one was the first I built so it has sentimental value hence not keen on scrapping nbsp

A:Corrupted desktop display, game crashing

1st 3 lines lead me to believe currupt grapics card might be wrong but desc top games etc all use graphics..
I do think its got something to do with graphics I could be totally wrong but seams very strange how mainly problem is when starting games. or maybe psu could be faulty and now supllying enough power lets see what the real tech guys say
 

http://www.techspot.com/community/topics/corrupted-desktop-display-game-crashing.193672/
Relevancy 29.24%

Struggling to find the right case for me, where can I find a case with:

ATX
Soundproofing
Dustproofing
Space for at least 5 Hard Drives
Space for at least 1 Optical Drive
Space for at least 1 ssd (optional since I currently use a converter)
Space to fit a HD Radeon 5970 / HD Radeon 7990
Space for large fans / cooling design
Very Heavy/average (optional - Not a downside)
 

A:Appropriate Case

I would recommend the CM Silencio 650, which is the most silent case I can think of, but it cant support the 310mm 7990. That means you need a full tower case. I think your best bet is the Fractal Design Define XL R2, which comes in grey and black. It has 10 HDD bays (SSDs just need a converter) and a optical drive bay. It is also soundproof, has filters for fans (dust proof), and can support up to 330mm cards with the drive bays intact.
Grey:http://www.amazon.com/Fractal-Desig...4693&sr=8-1&keywords=Fractal+Design+Define+XL
Black: http://www.amazon.com/Fractal-Desig...4693&sr=8-2&keywords=Fractal+Design+Define+XL
 

http://www.techspot.com/community/topics/appropriate-case.192752/
Relevancy 18.92%

Hiya,

trying to resolve an issue with my homebuilt computer crashing while playing games. I had an HIS Radeon 5770 installed. I removed it and put in a Radeon 6670. When I powered the computer up, I got "no signal" on my display. I removed the new card and put in the old card again. "no signal"

I tried both in another PCIe slot. "no signal"

For the record, I have a Rampage III Formula mobo. There's no onboard video, so I can't try the computer without a video card.

Help?
 

A:Installed new Graphics card, now neither new nor old card sends signal to display

Have you tried clearing the mobo's CMOS (including battery removal) ?
Did you test the HD 5770 in another machine to see if it was indeed failing ?
 

http://www.techspot.com/community/topics/installed-new-graphics-card-now-neither-new-nor-old-card-sends-signal-to-display.192721/
Relevancy 21.5%

Hey guys , I just bought an HIS AMD HD 6670 1GB GDDR5 GPU.
Im facing a big problem fixing this issue, first of all my specs are :-
i3 2100 - 3.10 GHZ processor
4GB DDR3 1333MHz RAM
Current GPU - : Nvidia EN210GT(Silent series)
1TB HDD - WD.
400 Watt SPMU (PSU)
MOTHERBOARD : INTEL DH61ww

Problem: when I use my old GT210 my monitor shows up everything. Works perfectly.
when I put my NEW HD6670 , Im getting NO Display from the CPU /GFX card.
PLEASE HELP ME !
My Monitor is DELL IN1920 which has only a VGA Port & my HD6670 has VGA , DVI & HDMI port .
BUt I tried all still got NO Signal.
I tried this card on other pc. It worked but idk why isnt working on this.
 

A:Monitor - No display when i put my HD6670 into motherboard

Try this: With the GT 210 installed uninstall the Nvidia graphics driver from Add or Remove Programs (XP) or Programs and Features (Windows 7). Shut down PC and remove old card and insert new card. Connect video cable to new card and turn on PC. See if the monitor displays anything. If it works, install the latest AMD graphics driver.
 

http://www.techspot.com/community/topics/monitor-no-display-when-i-put-my-hd6670-into-motherboard.192615/
Relevancy 21.5%

Hello First time posting here I apologize if this is not in the correct forum Anyway I have been having some showing device Dxdiag not display trouble with my graphics card drivers I experienced some graphical glitches followed by a blue screen of death a few days ago and since then my graphics card has not been working I have groups of vertical lines running down my screen My dxdiag does not show anything for display device I am using Dxdiag not showing display device an NVIDIA GeForce GTS and when I open the device manager it gives me error code for display adapters Additionally when I try to open the NVIDIA control Dxdiag not showing display device panel it says I am not currently using a display attached to an NVIDIA GPU I have reinstalled the drivers several times using both the express and custom clean install I have run driver sweeper in safe mode Nothing I have done has had any effect Please help At this point I am assuming I need a new graphics card but am hoping there might be another issue Here is my dxdiag ------------------ System Information ------------------ Time of this report Machine name DAN-PC Operating System Windows Ultimate -bit Build Service Pack win sp gdr - Language English Regional Setting English System Manufacturer System manufacturer System Model System Product Name BIOS BIOS Date Ver Processor Intel R Core TM CPU GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Display Tab No problems found Sound Tab No problems found Sound Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name Manufacturer Chip type DAC type Device Key Enum Display Memory n a Dedicated Memory n a Shared Memory n a Current Mode x bit Hz Driver Name Driver File Version Driver Version DDI Version unknown Driver Model unknown Driver Attributes Final Retail Driver Date Size bytes WHQL Logo d n a WHQL Date Stamp n a Device Identifier D B EE - - CF-B -B DAEC CB Vendor ID x Device ID x SubSys ID x Revision ID x Driver Strong Name Unknown Rank Of Driver Unknown Video Accel Deinterlace Caps n a D D Overlay n a DXVA-HD n a DDraw Status Not Available D D Status Not Available AGP Status Not Available ------------- Sound Devices ------------- Description Speakers High Definition Audio Device Default Sound Playback Yes Default Voice Playback Yes Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS B amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Digital Audio S PDIF High Definition Audio Device Default Sound Playback No Default Voice Playback No Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS B amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Digital Audio S PDIF High Definition Audio Device Default Sound Playback No Default Voice Playback No Hardware ID HDAUDIO FUNC amp VEN EC amp DEV am... Read more

A:Dxdiag not showing display device

Are you sure your DVI, display port, HDMI, etc is connected to the graphics card not to the onboard graphics? Try reseating the card on another PCIe x16 slot. Make sure the display connections are connected to the GPU not the onboard graphics. Do the clean install to the latest stable drivers (314). Driver sweeper should have cured any software issues. If the reseating, checking the connectors, etc doesnt work, it is most likely an issue with the card.
 

http://www.techspot.com/community/topics/dxdiag-not-showing-display-device.192194/
Relevancy 27.52%

Late night I was in bed then I shock Static button... mobo case power fried? remembered that I needed to pay a bill that was due the next day So I jump out of bed and right to my PC I reach for the power Static shock case power button... mobo fried? button with my static charged finger unawares and get a shocking surprise I didnt actually press the button but the PC fired up anyway only to power down seconds later So I ground myself too late and press the power button Nothing no response Next I open the case and press the power button on the mobo no response The power and reset button on the mobo are lit up btw So then I unplug my power cord from the psu wait for the pc to drain completely then plug the cord back in Right when I plug the power cord back in the pc fires up then dies seconds later I ve tried -shorting out the battery -resetting cmos -screwdriver to the case power pin -bench test All with the same result Heres my hardware CASE Thermaltake MK-I Chaser CPU Intel Core i k GHz GPU EVGA GeForce GTX GB MOBO Asus P Z V PRO GEN MEM Corsair Vengeance GB DDR - x SSD Crucial M GB HDD Western Digital Caviar Black TB Windows Home Dont know what to do next I bought everything in February of so everything should be under warranty if qualified Thanks in advance nbsp

A:Static shock case power button... mobo fried?

Sounds like you've fried something important. You could probably try getting an RMA on the board, but they might realize what has happened.

I feel for you bro. I did a similar thing with a motherboard not too long ago.
 

http://www.techspot.com/community/topics/static-shock-case-power-button-mobo-fried.190991/
Relevancy 21.07%

Hello folks I have the exact same problem - with my satellite L D-S I am quite sure that the hdd is still ok and the ram is too Upon power on the power light turns on hdd spins up the hdd light flickers a little then it does nothing No backlight no image no error beeps either Quite disappointing as it was in sleep mode and it started doing this when I woke it up Never had a problem with it except for a loose solder connection on the power jack which I fixed about a year ago I am an electrical engineering student so I like to get some experience trying to fix this The computer is about years old phenom II triple core cpu g of memory g hdd and some sort of radeon graphics chip Worse case the graphics chip could be dead No video output from external monitor connector If you need more info I will gladly share it BTW the cpu gpu heatsink warms up as usual and the fan runs too VERY puzzling Cheers -Ben nbsp

A:Toshiba Satellite L645D-S4056 no display

The motherboard (GPU chip) is bad. The motherboard will have to be replaced. They are available on EBay usually for way under $150 daily
 

http://www.techspot.com/community/topics/toshiba-satellite-l645d-s4056-no-display.191045/
Relevancy 28.38%

Anyway that I can make the Thermal Element G case compatible with the ASUS P8Z77-V LK LGA 1155? I know the case doesn't have a USB 3.0 front port but the motherboard does. What can I do to get around this, because this is the only case that I can find that I really like.
 

A:MB and case compatibility issue

Ah, good to see you have received your components . I dont really get what you mean. The case doesnt have front USB3 ports? This may be because the case is an old model.
 

http://www.techspot.com/community/topics/mb-and-case-compatibility-issue.191480/
Relevancy 21.5%

My friend have a dell D630 laptop and he does'nt display...
when it turn On we here the welcome sound but can not see any thing...
can any one tell me what to do????
 

A:Dell laptop display problem

Hook it up to an external monitor. If it works, the display/connector is bust.

If it doesn't work, mobo/GPU is bust.
 

http://www.techspot.com/community/topics/dell-laptop-display-problem.191251/
Relevancy 28.38%

If you like this modification please comment by a Korean Guy
 

A:Beautiful case modification

That is pretty cool actually. Pretty useless though lol.
 

http://www.techspot.com/community/topics/beautiful-case-modification.191000/
Relevancy 28.81%

Hey everyone! It's jsut a quick post, but I recently finished a brand new computer build, but I am worried my case doesn't supply enough cooling, but also don't like the nosie it produces during gaming, so I am wondering if anyone knows of any good cases under 50/$60. I have looked at the powercool dominator and am wondering if it will be enough (http://www.amazon.co.uk/Powercool-D...9?s=computers&ie=UTF8&qid=1362519059&sr=1-109).

My build is as follows:
- AMD 8350 CPU with stock heat sink/fan
- Gigabyte 7950 triple fan graphics card
- 16GB RAM
- SSD & Hard Drive (not performance, but more energy saving)
- CIT basic case modded with an additional fan on the side
- ASUS M5A99X Motherboard
- 880w PSU

Thank you for any advice! It will need to have high cooling abilities, but also quite quiet!
 

A:Computer case for $60?

- Noise from case is 95% the fault of the fans. More expensive cases provide quieter fans, but you're paying a lot more to start with anyway. Plus, you'll have to provide your own additional fans in most cases (pun not intended) anyway.
- PSU fan could be loud..?
- Cooling performance is a combination of how neat your build is (cables etc), the amount of components, the type of cooling on your devices, fans used, and airflow provided by case. This is a lot of variables, so it can be hard.
- The case you linked is a budget case. Don't expect miracles.

- My suggestion - stick with what you have, tweak the fan speeds a bit.
 

http://www.techspot.com/community/topics/computer-case-for-60.190450/
Relevancy 21.07%

I was playing Dard siders Suddenly I got a call in my mobile So I left the game running w o pausing and attended the call Suddenly I saw my monitor screen went off I checked the power connections VGA cable connection b w the monitor amp the CPU They were all fine I just can t see anything in the monitor The monitor 7750 HD fan display working & 1GB) (Powercolor Radeon No stopped LED is showing the status of quot no I p quot LED going on amp off I got confused and tried forced shutdown amp restarted the machine Everything is perfectly normal Even the beep sound from CPU But still there is no No display & fan stopped working (Powercolor Radeon HD 7750 1GB) display I was wondering whether the problem could be with the graphics card And later I confirmed it I found it lying dead inside the cabinet The fan is not running Hence I changed the VGA cable from the GPU port to Motherboard VGA port I saw the machine is ready for login in the monitor screen Therefore I decided that there is no issues any other components inside the cabinet I still had a doubt in the PCI slot of the motherboard Hence I swapped the GPU with another standy GPU ati radeon hd which I was using before I got the display from this card too Finally I concluded that the problem is with GPU only I was shocked since I bought this card for - INR last month No display & fan stopped working (Powercolor Radeon HD 7750 1GB) only Even I changed My PSU which provides Watts added GB of additional RAM amp a additonal CPU fan I still dont understand what has caused this failure I removed the card to see any H W faults But there is nothing in No display & fan stopped working (Powercolor Radeon HD 7750 1GB) the card It still looks good When I reseat the card amp turn the power on The fan starts to rotate amp stops immediately spins less than quarter of sec Can anybody suggest any troubleshooting which can be done from my side Or please explain what has happened nbsp

A:No display & fan stopped working (Powercolor Radeon HD 7750 1GB)

Could not really tell you why the card went bad, But they do sometimes. If you have a warranty on it . I would send it back for a replacement. Seeing as it not your main board . All your other video graphics work.
 

http://www.techspot.com/community/topics/no-display-fan-stopped-working-powercolor-radeon-hd-7750-1gb.186625/
Relevancy 21.07%

I have a Gateway FX Gaming computer Link http www newegg com Product Product aspx Item N E and I try to plug in the video card given in the graphics description in link quot NVIDIA GeForce GT Over-Clocked w MB on board memory and DirectX quot Which as far as I know the video card was made to fit the computer When ever I try to plug the graphics card into my computer I dont get any display on my monitor at all Also The power button-light flashes Both fans computer and video card turn on and work But after a minuite or monitor in? plugged is card No display on when graphics so the computer turns off My onboard normal graphics work normally but obviouly arent very good for gaming If there is any way possible to fix this problem please reply I am very eager to resolve this issue Additional Details My computer hasnt worked with my No display on monitor when graphics card is plugged in? graphics card before therefor I decided to Restore my computer to factory settings and still didnt work and thats where I ended up now nbsp

http://www.techspot.com/community/topics/no-display-on-monitor-when-graphics-card-is-plugged-in.188450/
Relevancy 21.5%

Hi I have horizontal lines that scan my monitor whenever I play a game I can see the horizontal lines only on darker colors like grey dark-green etc I have a Samsung E display that runs at p on hz on a vga cable no hdmi dvi support on it I tried another few vga cables I tried some other power cable but with the on my Horizontal monitor display waves same result the waves were there I have all drivers updated monitor and other hardware My current PC specs are AsRock N -C S UCC Phenom II x Gb DDR Radeon HD gb HDD Sata and a power supply Sirtec W If I open Far Cry for example I get those horizontal lines If I Horizontal waves on my monitor display minimize the game I still get the horizontal lines if I have something dark on my display a grey dark-green dark-blue website Before the HD I had a GTS and had the same problems Could it be the PSU or the motherboard or what I also tried a different display monitor on the VGA and had the same horizontal lines scaning my display monitor but on the DVI the problem disappeared The thing is that my monitor doesen t have a DVI only VGA The monitor is a year old still under guarantee same goes for the PSU and the other components Sorry for my bad English I hope that you can help me nbsp

http://www.techspot.com/community/topics/horizontal-waves-on-my-monitor-display.188186/
Relevancy 21.07%

Please excuse my english...
my netbook display become stretch like in this picture :

and it can't get past the POST screen. I tried to remove the RAM and put it back again with no luck...

please give me solution for this....
 

A:Netbook display becomes stretched, can't get past POST

Can you re-post the picture?
 

http://www.techspot.com/community/topics/netbook-display-becomes-stretched-cant-get-past-post.187760/
Relevancy 21.07%

Hello Community My name is Andrew Fratello and I work for a computer repair shop in Florida I m new in the field at a professional level but I ve been tinkering with computers since I was a little kid I m new to this site as well and I hope it to bring me some good help with some of my future work if I cant trouble shoot it myself The HP Pavilion Dv - dx Laptop came into the shop today The problem with the PC is that it doesn t have any display HP laptop Dv6-3025dx issue Pavilion display at all You can turn it on and it will stay on just fine but even when I plug in a VGA cord connected to one of our shop HP Pavilion Dv6-3025dx laptop display issue monitors the screen still isn t displaying If it was a LCD screen issue I m sure I would have been getting video feed from the external monitor which leads me to believe that the motherboard is malfunctioning I want to double check here with you guys and get a couple opinions before I let the guy know what the problem is and what needs replacing The last thing I want to do is have the gentleman buy a new part that is worth a couple hundred and then it turning out to not have been the problem at all Please get back to me ASAP Thanks and looking forward to your responses nbsp

A:HP Pavilion Dv6-3025dx laptop display issue

My guess would be the video chip. If you are not getting it on either screen.
 

http://www.techspot.com/community/topics/hp-pavilion-dv6-3025dx-laptop-display-issue.187734/
Relevancy 29.67%

So I am thinking about upgrading my cpu and switching over to intel but I cant really come up with any good reasons to buy a new cpu and motherboard other than my cpu is outdated and I would like to be able to record lets plays and gameplay. Are there any other pros to buying a new cpu? Like would the performance of my machine increase substantially or something?
P.S I was going to go with a:
Intel i5-3570k
ASRock Z77 Extreme3 ATX LGA1155

pc current specs:
AMD FX-6100-six core processor
16 gb 1033 mhz ram
XFX Radeon 6950
ASUS M5A97 motherboard
windows 7 ultimate
 

A:I am thinking about upgrading my CPU and switching over to Intel but...

Depends on what you're doing - if you do a lot of video encoding or CPU heavy tasks then it might be a worthwhile upgrade but if not then either upgrade your GPU if your main focus is gaming or SSD if you just want a more responsive machine for general use.

Unless your current CPU is frequently running at 100% there's no real reason to spend so much on an upgrade to a 3570K especially as Intel's next gen Haswell processors are coming out in a few months.
 

http://www.techspot.com/community/topics/i-am-thinking-about-upgrading-my-cpu-and-switching-over-to-intel-but.186851/
Relevancy 26.23%

Recently this has come to light during my own research into mobile GPUs that are currently available on the market as I ve been considering replacing my aged i - M laptop with M GPU I had switching technology mobile graphics AMD problems... has "Enduro" even placed an order and paid for a machine but after reading much about the issue none of it from AMD themselves other than quot For those with M - Enduro issues are also being investigated quot by http twitter com CatalystCreator back on the th of August I cancelled before the unit was completed and shipped This is mostly a problem for Clevo EM EM based laptops which AMD mobile graphics switching "Enduro" technology has problems... have no way of bypassing the Enduro graphics switching unlike Alienware products which have a hardware switch Basically there is something very wrong with this immature technology Users are finding under utilisation of their cards for example Battlefield person multiplayer AMD mobile graphics switching "Enduro" technology has problems... fps dips with AMD mobile graphics switching "Enduro" technology has problems... lower recorded GPU utilisation when it should be going flat out Even worse is when the graphical settings are lowered to try and allow for more fps to be pumped out by the GPU the situation does not improve It is as if the Enduro tech is deciding that the lower workload required at lower resolution or graphical settings means it can lower utilisation further This means that someone with FPS issues at Ultra settings can drop to Medium settings and not see any improvement in output Threads about this http www rage d com board showthread php t http forums guru d com showthread php t http hardforum com archive index php t- html And many others Facebook awareness page https www facebook com Amd mEnduroUtilizationAwareness ref ts Many owners of systems with M graphics cards are now concerned with AMD s reluctance to comment on the problems that they are just going to try and sweep it under the carpet and move on to the next generation of GPU with the next generation of Enduro perhaps one that works No one is exactly sure if the problem is even something that can be overcome with a software driver or whether it is a hardware issue that the Clevo based laptops are stuck with nbsp

A:AMD mobile graphics switching "Enduro" technology has problems...

The silence from AMD on this is deafening. I honestly can't in good conscience recommend anything AMD related unless they get this situation fixed. The fact that they have tried to silence other manufacturers on forums says a lot. I would feel much better if they were just open about it and said what they are doing to fix the problem.
 

http://www.techspot.com/community/topics/amd-mobile-graphics-switching-enduro-technology-has-problems.185018/
Relevancy 21.5%

Hello,

I bought an industrial 42" PC screen recently and a new computer as well. Unfortunately when I turn on the computer it only displays as a 15" screen rather than 42" as it should

I have a HDMI cable plugged in and bought a graphics card but neither have solved the problem. The screen is made by Winmate and was purchased off ebay. The seller assured me that it worked "fine" for him and showed a full screen and was very unhelpful.

I can provide screenshots once I get home.

Thank you so much in advance.
 

A:Display is much smaller than screen

What is the link to the screen you bought?

Did you install the video card driver?

Does the screen have a driver?
 

http://www.techspot.com/community/topics/display-is-much-smaller-than-screen.185465/
Relevancy 21.07%

Hello I need some help pls.On the screen appeared some vertical lines and the computer goes very slow and pictures make waves when I move them.Also games go pretty bad with the exception of World of Warcraft that does not work at all and says "failed to find a suitable display device "

Windows XP Service Pack 2 x86 NTFS
Internet Explorer 7.0.5730.11
Motherboard: Micro-Star | | MS-7255
Processor: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz

C: is FIXED (NTFS) - 15 GiB total, 0,708 GiB free.
D: is FIXED (NTFS) - 218 GiB total, 72,918 GiB free.
E: is CDROM ()
 

A:Display issues, vertical lines and other distortions

First things first, have you tried reinstalling/updating your video card drivers?
 

http://www.techspot.com/community/topics/display-issues-vertical-lines-and-other-distortions.184867/
Relevancy 27.95%

Hello, I'm just wondering if it is possible for a PSU to stop delivering power to case fans due to aging/dying or would my case fans really be dead and in need of replacement.
 

A:Aging PSU or genuinely dead case fans?

How old is the power supply? Also, how many case fans do you have? It seems unlikely that the power supply would stop sending power to the case fans only. If everything else is working the way it should, perhaps your case fans are dead.
 

http://www.techspot.com/community/topics/aging-psu-or-genuinely-dead-case-fans.184874/
Relevancy 21.93%

hello ever since I got my new video card its been working fine and everything but now there is a weird problem that happens during gaming I dont know if that problem has aname so im gonna try my best to explain exactly what happens



IM in the game without alt tabbing or doing anything but basically playing the game The screen turns black for 2 seconds and then comes back normally and it does the exact same thing 4-5 times one after another till it settles then starts doing the same thing again after like 3-4 hours I have tested it on several games (3D) and the same happens I need some assistance please
 

A:Display problems

please list your Power Supply Model and Wattage, and also your Video Card Model.
 

http://www.techspot.com/community/topics/display-problems.182858/
Relevancy 21.5%

So I have this problem that the tech guy at my school library did not even know what causes it I think it is a mixture of Screen display problems both hardware and software problems What happens is that sometimes when I open a new window or more commonly a web page about a third of the screen turns a random assortment of vertically striped colors - in the case with the attached picture it happened to turn white and black for the most part Functionally speaking this doesn t affect the operation of the computer as I can still click behind the messed up part and the computer responds but I have to click only through guessing that is I cannot see anything behind the stripes They disappear if the screen is shut off that s it which means that Screen display problems I have left the screen turn off option at one minute of rest Screen display problems One thing that I Screen display problems have noticed is that this usually if not always happens when I go to a webpage or document that has a black dark horizontal line or bar or large text at the top it always always always happen when I go to scholar google com If you go to that website you ll notice the black dark webpage menu thing that I m talking about So even though half the screen shuts off and doesn t display properly which is a hardware problem it seems it is triggered by some code which would make it a software firmware problem as well no I tried updating the driver for my AMD Radeon HD video card from the previous version which had been installed by the tech guy earlier today and didn t fix the problem with the newest beta version that was released literally just one week ago this also did not work Neither did the version that was installed with the computer when I bought it brand new as it was the one in use when the problems started occurring My computer is an MSI X - US I know it s along description but any help is appreciated nbsp

A:Screen display problems

The LCD screen probably needs to be replaced... They do go bad
 

http://www.techspot.com/community/topics/screen-display-problems.182628/
Relevancy 27.52%

I m not too tech proficient but I m getting better and decided to tackle my biggest challenge so far I took everything out of a Gateway PC replaced the PSU and put everything back into a new full tower case Everything works great except the audio Here is the problem and details I only have an onboard audio card The new case has a headphone jack on the front that connects to the quot audio quot pin connection on the bottom of the motherboard I connected this After reassembling the audio jack on the rear of the case on the motherboard I O panel does not produce sound HOWEVER the headphone jack on the front DOES produce sound I m a little puzzled because that would seem to imply the motherboard is fine Does the I panel audio ports run off after new components case to Onboard problems audio moving of dedicated Onboard audio problems after moving components to new case power or a specific power cord that I might have placed in the wrong place or backwards Any other ideas Followup question THere is something Onboard audio problems after moving components to new case wrong with the front headphone jack maybe a manufacturer defect that is causing the left speaker to crackle and be less loud almost like a bad speaker but I tested for that In the case I took everything out of there was a single AUDIO pin connection from the front panel to the motherboard But on the new case the AUDIO pin connection had an additional identically sized pin connection coming off of it about quot from the AUDIO pin connection It had some numbers on it like a voltage rating or something unsure I just left it hang loose Any help would be greatly appreciated MORE INFO Opened realtek HD Audio manager program When I plug Onboard audio problems after moving components to new case the jack into the back I O panel the corresponding area on the diagram does light up and recognize However no sound is produced when testing nbsp

A:Onboard audio problems after moving components to new case

Hi, If you replaced all the cables as they were then you should have no trouble.
The front panels are in 2 groups. The USB sockets are 1 group with a cable that runs over to the motherboard.
The front panel audio board has 2 cables that run from it to a single free socket, and that plugs onto a connector on the motherboard that has 5 pins in one row and 4 pins on the other row, with one pin empty.
But I would think it's more likely the problem is the settings in Windows.
Right click on the speaker icon in the taskbar, choose 'playback devices', and if your speakers are plugged into the back of the pc, you should see them in the list. They should have a green tick over the speakers.
If not, right click on the speaker line, and choose 'enable', that should put the sound signals onto the socket where your external speakers are connected to.
* Might also be worth testing that your external speakers are working by plugging them into something you know works, such as a mp3 player, mobile, or tape player output. It's possible the speakers are not getting power. (Power LED on one speaker).
*Also check for muted audio in Windows, and the 'on/vol' control on the actual speakers.
 

http://www.techspot.com/community/topics/onboard-audio-problems-after-moving-components-to-new-case.182273/
Relevancy 21.5%

so hello guys lately ive been getting some problems with my visual not those big problems though some times when I am playing or eighter just roaming the internet or desktop the screen turns black and gets back on and when I turn the pc on at first I hear some wierd noise from the motherboard what does this mean im frying my gfx card? its just a geforce 6200 which is getting scrapped with a new motherboard so just to know the problem
 

A:Screen display problems

Ok, ANY strange noises or high pitched sounds from a PC is something to be concerned with - it could be trouble. My advice, shut down your tower, unhook everything, take it outside & blow all the dust out of it! you'll need like 3 or 4 cans of air (b/c they freeze up bout 1/2 way, need to rotate) or an air compressor w/ the regulator set no higher than 45psi. Once you have the tower cleaned out, get to a very well lit area, or get a bright flash light, expect the system board, graphics cards, any expansion cards, spin fans with your finger, they should spin freely and continue to spin just a bit after. if fans are tight, replace them. on the system board, look for swollen capacitors (they look like little 1/3" barrels sticking up on the circuit boards see image) - specifically around the heatsink of the CPU - this is where the voltage regular is for the system board. if any of the capacitors are swollen, or oozing black or while slimly looking stuff - be wary. if you have a camera, post a pic or two if you find swollen/oozing or questionable capacitors. if you have none, great! if all your fans are spinning freely, great! Just keep an ear & eye out for issues as such. FYI keeping the inside of the PC clear of dust & debris keeps it running cool. hope this helps, take care!
 

http://www.techspot.com/community/topics/screen-display-problems.181583/
Relevancy 21.93%

Hello,
Just Built a new PC for the first time however no matter what I seem to do, there is never a display with any monitor I use. I have an
- Asus AMD 880G ATX Motherboard
- NVidia gtx 560 graphics card
- AMD Phenom 2 4x3.4GHZ CPU
- 500w corsair power supply
I have tried all output source available and even removed the graphics card and used intergrated ports, still no signal to monitor.
An help would be great
Thanks
 

A:Just built PC, no display

Ok, assuming everything is powering on as it should with proper connections, is the primary graphic adapter set to PCI-E in the BIOS?
If so, try hooking up the monitor with another system (maybe your friend's) and see if it's working. If it isnt, get it replaced.
 

http://www.techspot.com/community/topics/just-built-pc-no-display.180987/
Relevancy 28.81%

im starting a new project of wich im going to mod an xbox case to fit a micro atx board. i know this has been done before but i thought i would have a go as im in the market for a htpc anyway. ill be using old compents ive dug out nothing special first gen sempron and a gigabyt board 1.g gigs of ddr ram and a geforce 6200 wich is low profile so should fit nicely.. when ive got some progress ill get some pics up!
 

A:PC in an Xbox 360 case

Here's something that may help you.
 

http://www.techspot.com/community/topics/pc-in-an-xbox-360-case.180162/
Relevancy 28.38%

Guys im buying a new gaming pc, hoping in doing some oc in the future. I in dought in wich case i buy , im thinking on the HAF X but i dont know yet, if u have a better case that is in the same price as the HAF X or less i would be greatfull to know. THX
 

A:New gaming case, leaning toward HAF X

Case choice is quite subjective, just get the one which you think looks the best. The performance difference between gaming cases is pretty minimal.

IMO the HAF series are total eyesores but that's probably just me...
 

http://www.techspot.com/community/topics/new-gaming-case-leaning-toward-haf-x.180243/
Relevancy 27.52%

Hello friends It s summer time in this part of the world and the need for good cooling has demanded acknowledgement fan poll: Opinion preference, and Case CPU pressure direction again Anyone who has lived in Texas knows what I m talking about dead To satisfy those needs on air cooling I ve come up with a mod which I will be posting in some time Now comes the problem The guide Opinion poll: Case pressure preference, and CPU fan direction will be on a quot works for me quot basis So how can I make it applicable for most people To solve that problem somewhat I ve got the option of a poll Here are the things which need to be considered Case pressure Case pressure is the pressure co-efficient of your case s airflow E g More intakes and less outlets create a positive pressure co-efficient while less intakes and more outlets create negative case pressure Note that this does not mean quot all intakes no outlets quot or quot all outlets no intakes quot It means intakes and outlets both working at different magnitudes Though this may appear irrelevant to some this has a lot of effect on the rate at which heat is vacated from the case CPU Fan direction This is a topic in which there is much disagreement Some believe a fan blowing away from a CPU is better some believe a fan blowing onto it is better However most modern systems have fans blowing onto the CPU As this changes the airflow pattern in a case it can fundamentally alter the scheme of my mod As always I m open to suggestions for improvement Any poll options will be added as necessary Cheers grinthumb nbsp

A:Opinion poll: Case pressure preference, and CPU fan direction

Added poll as per PM discussion with Marnomancer.
 

http://www.techspot.com/community/topics/opinion-poll-case-pressure-preference-and-cpu-fan-direction.179431/
Relevancy 27.95%

Hello everyone!
I just need some slight help here. I just 'built' my first custom PC. I bought this Antec Nine Hundred case with Upgraded USB3.0. I thought it was cool to have extra USB built right in. I also have the x58 Sabertooth mobo. The mobo doesn't have the I/O port the USB3.0 header cord. What can I use so I can get the usb header to connect. I'm guessing some sort of PCI card. Can anyone help me out? Thank you.
 

A:Case has USB3.0 built in, motherboard does not have input for it

A PCI card or a PCI-E card.
 

http://www.techspot.com/community/topics/case-has-usb3-0-built-in-motherboard-does-not-have-input-for-it.179612/
Relevancy 21.07%

Please help I have an eMachines ET G- w It has a cheap integrated graphics card and I purchased a new Galaxy GeForce GT graphics card along with a Thermaltake TR w PSU yesterday I installed both and powered the 430 upgrading after card a to No display GT GeForce graphics pc up The fans fired up in the PSU the Processor and the new graphics card I had my monitor that I had been using with VGA hooked up with an HDMI cable Now comes the problem I am not getting any picture whatsoever on my monitor No display after upgrading to a GeForce GT 430 graphics card It says no signal and it wont show any picture even at the start up I tried two different HDMI cables I tried a VGA and I tried a DVI None of these made anything appear on the monitor I turned the system off took out the new graphics card removed the new power supply and put the original one back in and tried to fire it up Now I have now picture with my original computer plugged into the original VGA slot I have no idea what to do and I am only a beginner when it comes to installing things into a PC I have asked around and no one had any idea how to solve this problem I don No display after upgrading to a GeForce GT 430 graphics card t want to have to buy a new computer just because I tried to upgrade this one That would suck If anyone could help it would be greatly appreciated nbsp

A:No display after upgrading to a GeForce GT 430 graphics card

What happens if you try to boot up the pc with the new GPU and PSU installed, but have the monitor hooked up to the integrated VGA port?
 

http://www.techspot.com/community/topics/no-display-after-upgrading-to-a-geforce-gt-430-graphics-card.179284/
Relevancy 21.5%

I recently bought brand new parts to build my own PC I had a friend put it together He tested it display won't Monitor PC build new on brand on his monitor and the bios started up fine I took it home and tried plugging it into MY monitor and there s no display The power light is just yellow The monitor is old but I know it works to an extent because my old desktop registers it It s a inch Dell The port on the back of the new desktop is VGA Here are the rest of my computer specs as follows Mobo - MSI Z MA-ED B LGA Intel Z B DDR SATA and USB Monitor won't display on brand new PC build A amp GbE MATX Processor - Intel Core i - GHz MB Cache Socket LGA Memory - Corsair Vengeance GB x Monitor won't display on brand new PC build GB DDR MHz PC -Pin DDR Memory Kit for Intel Core i i i and AMD Platforms SDRAM CMZ GX M A PSU - Corsair Builder Series CX watt Plus Certified Power Supply Compatible with Intel and AMD Platforms ATX CMPSU- CXV HDD - Western Monitor won't display on brand new PC build Digital Caviar Blue GB SATA III RPM MB Cache Bulk OEM Desktop Hard Drive - WD AAKX Video card - MSI AMD Radeon HD G Pcie GDDR Heatsink - Cooler Master Hyper EVO CPU Cooler RR- E- PK-R Like I said he plugged the newly built PC into his own monitor and the bios started up fine Any suggestions nbsp

A:Monitor won't display on brand new PC build

did you plug the monitor into the board or the 6850? Just use the VGA/DVI adapter that came with the GPU and you should be good.
 

http://www.techspot.com/community/topics/monitor-wont-display-on-brand-new-pc-build.179286/
Relevancy 21.5%

Hello everyone, nice to be here.

I have an Asus p6t se and just upgraded the video card to an inno 3d gtx 570 but it wont boot, just gives 1 long and 3 short beeps. I swapped out the video card with my old one and it boots fine. I'm wondering if it's a power issue. On my Inno 3d gtx 570 are 6 power pins and 8 power pins, The box came with a converter for the 6 pins but not the 8 and I'm wondering if I need both.
Any light you could shed would be appreciated.

Thanks
 

A:No display after GeForce GTX 570 upgrade

Yes you need both of the pins connected to the power supply.

What PSU have you got?
 

http://www.techspot.com/community/topics/no-display-after-geforce-gtx-570-upgrade.178329/
Relevancy 28.38%

My friend let me have his old Cooler master 430 black elite, Im having trouble with it. My computer wont turn on, I know all my components work because they just came off my old case and they worked great. The difference between my case and this new case is the system panel cords(ie. hdd led, reset sw, power led, and power sw) are all seperate meaning there are 5 different cords compared to the one that my old case used to have one bundled up. I've looked online on how to connect these and nothing seems to work. Anyone know how to connect these cords to my intel g41 chipset?
 

A:Computer won't turn on in new case

you can get a Q-Connector or look for a diagram of your board and it will tell you what goes where. What board do you have?
 

http://www.techspot.com/community/topics/computer-wont-turn-on-in-new-case.178020/
Relevancy 20.64%

Hi everyone In need of help Started up my Dell laptop and I am 1737 2000-0321 display on laptop, Error Dell Blank greeted by a blank screen though the machine goes through the motions of starting up I do not see any faint ghosting When connected to an external monitor all works fine and I have tried changing the inverter but Blank display on Dell 1737 laptop, Error 2000-0321 no luck Ran a diagnostic check and receive the following Error Code Msg Error Code - Msg LCD EDID - Unable to access EDID EEPROM I also tried holding the quot D quot key and powering up The LCD flashed a series of solid color screens Red Green Blue White Black I assume that this means that the backlight is good Does it also mean that the cable is good Not sure what else to check I am guessing that it is eiter the LCD screen controller board itself or the cable Any advice I am comfortable replacing parts Prior to this everything was working fine The display had even brightness and color Would anyone be able to restore my sanity and offer some words of wisdom guidance Would be much appreciated Many Thanks nbsp

A:Blank display on Dell 1737 laptop, Error 2000-0321

Replace the LCD panel including the backlight. External monitor okay, motherboard is okay... Slight chance of a damaged LCD cable to motherboard
 

http://www.techspot.com/community/topics/blank-display-on-dell-1737-laptop-error-2000-0321.176322/
Relevancy 20.64%

Hello. Since a year ago I have been seeing white lines across the screen of my laptop. I have a Sony Vaio VGN-NR430E Laptop. The white lines/band running horizontally across the screen is not permanent, and goes off if point pressure is applied from the top coverside of the screen, or on the face of the screen.

The problem seems like a lose connection but one could not be found when the laptop was opened up.

Do note, that the LCD screen does work and does not go off or black when these white lines take over. Also the white lines are not constantly going across the screen and usually only last for a few seconds. Also when the laptop is hooked up to a TV via a VGA cable, the white horozontal lines do not show up on the TV even when they are on the computer.
 

A:Daily white lines across Sony VAIO laptop display

The LCD panel needs to be replaced. It probably got damaged by excessive pressure on the top of the closed laptop, one too many times
 

http://www.techspot.com/community/topics/daily-white-lines-across-sony-vaio-laptop-display.175542/
Relevancy 18.92%

Yo, all i could think of is to use keyboard menu shortcuts blindfolded, i found instructions from this forum to do so, but only for XP SP1 and SP2, which dont seem to work, i assume because i hvae SP3
 

A:Accidentally disabled display adapter and can't see, safe mode or VGA mode won't work

can you revert to an old save point in system restore?
 

http://www.techspot.com/community/topics/accidentally-disabled-display-adapter-and-cant-see-safe-mode-or-vga-mode-wont-work.176376/
Relevancy 21.5%

i have a compaq presario sr5202hm when i start my computer the screen will not come on it just blinks no input signal on the monitor
 

A:No display after turning on the computer

Well, first things first. Make sure all cables are plugged in correctly, all the way. Never hurts to check.
Chances are you know how to plug in your monitor so we wont spend anymore time on that. Could you give some more details about your system? What hardware are your running? Does the system have integrated video or a dedicated graphics card?
 

http://www.techspot.com/community/topics/no-display-after-turning-on-the-computer.176369/
Relevancy 21.5%

Well I am using asus P5P 800 VM motherboard, 2.53 GHZ intel celeron processor and 1.5 GB ram installed in it.
I have bought an used ATI 9600 AGP card and installed it in my system, it was working good but then I have changed my system's processor and installed an used 3.0 GHZ intel processor.
Now I am having problems with monitors display. Now it is showing yellow lines.
If anyone have the solution please tell me because I am really depressed.
 

http://www.techspot.com/community/topics/display-problems-with-ati-9600.176265/
Relevancy 21.5%

This is happned wen i try launtch NVIDIA Control panel You are not currently using display attached to an Nvidia GPU when i go to Computer Managment gt Divice Manager gt Display adapters gt Nvidia GeForce gt Properties its say divice status is Windows has stopped this device because it has reported problems code And available settings display Nvidia are not when i try launtch World of warcraft its Nvidia display settings are not available say Failed to find suitable display divice I try update all my drivers that not help i try reinstall windows that not help ------------------ System Information ------------------ Time of this report Machine name DOVYDAS-PC Operating System Windows Ultimate -bit Build win gdr - Language Lithuanian Regional Setting Lithuanian System Manufacturer System manufacturer System Model P QL PRO BIOS BIOS Date Ver Processor Intel R Core TM Duo CPU E GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting DPI percent System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Nvidia display settings are not available Display Tab No problems found Sound Tab No problems found Sound Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name Manufacturer Chip type DAC type Device Key Enum Display Memory n a Dedicated Memory n a Shared Memory n a Current Mode x bit Hz Driver Name Driver File Version Driver Version DDI Version unknown Driver Model unknown Driver Attributes Final Retail Driver Date Size bytes WHQL Logo d n a WHQL Date Stamp n a Device Identifier D B EE - - CF-B -B DAEC CB Vendor Nvidia display settings are not available ID x Device ID x SubSys ID x Revision ID x Driver Strong Name Unknown Rank Of Driver Unknown Video Accel Deinterlace Caps n a D D Overlay n a DXVA-HD n a DDraw Status Not Available D D Status Not Available AGP Status Not Available ------------- Sound Devices ------------- Description Speakers High Definition Audio Device Default Sound Playback Yes Default Voice Playback Yes Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS FE amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Digital Audio S PDIF High Definition Audio Device Default Sound Playback No Default Voice Playback No Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS FE amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Digital Audio S PDIF High Definition Audio Device Default Sound Playback No Default Voice Playback No Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS FE amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura ... Read more

A:Nvidia display settings are not available

Bad install, bad driver, or bad card. First try re-installing from the NVidia site download.
 

http://www.techspot.com/community/topics/nvidia-display-settings-are-not-available.176152/
Relevancy 20.64%

Hello all A few or POST fans display no work, system; and Homebuilt lights but weeks ago one of my friends and I decided to build a PC for my dad we both have minimal experience but my friend has built PCs before I ve helped others design PCs Homebuilt system; fans and lights work, but no display or POST but I ve never physically built one Anyway I checked everything out to make sure it s all compatible technically it should work but we Homebuilt system; fans and lights work, but no display or POST ve run into a few problems After connecting everything to the appropriate terminals and turning on the machine I noticed Homebuilt system; fans and lights work, but no display or POST that all of the fans including the CPU fan were in perfect working order the case LEDs hooked up to the mobo work fine and the mouse and keyboard light up when the PC is turned on However there is no response from the Disk Drive or Hard Drive and the monitor claims there is quot no incoming signal quot All of the hardware is brand new straight out of the box so I m not sure what the problem is Any suggestions are most welcome as I have four days to finish this thing Here are the specs There is no graphics card because my friend informed me that the particular CPU we picked out has HD graphics onboard meaning we wouldn t need a graphics card The monitor is rather old and has a D-Sub connector but it was working well last week and the mobo I picked out is compatible with D-Sub CPU Intel Core i - Motherboard GIGABYTE GA-H M-DS Micro ATX Intel Motherboard Disk Burner ASUS DVD CD Player Burner Tower NZXT Source Elite White Steel RAM G SKILL Ripjaws Series GB x GB Hard Drive II Seagate Barracuda GB Power Supply Corsair quot CX Builder Series quot nbsp

A:Homebuilt system; fans and lights work, but no display or POST

There is no onboard video on that board. Not sure why your friend told you that, cpu has nothing to do with it. You will need to add a graphics card to fix your problem. Here are the board specs.. If you can exchange the board for it's z68 counterpart (paired with your i3) you could than get onboard graphics and not need a GPU.

http://www.newegg.com/Product/Product.aspx?Item=N82E16813128527
 

http://www.techspot.com/community/topics/homebuilt-system-fans-and-lights-work-but-no-display-or-post.175386/
Relevancy 21.5%

My old graphics card died so I bought a new one asus 210 silent 1gb ddr3.

I have no display with my new card. I have tried re seating it multiple times with the same results.

I have no on board graphics so I can not get on to my computer to install any new drivers or remove old ones. Can someone please help me.

If you need more information just ask.

Thanks
 

A:Old graphics card died... new one has no display

Adampyne said:





My old graphics card died so I bought a new one asus 210 silent 1gb ddr3.

I have no display with my new card. I have tried re seating it multiple times with the same results.

I have no on board graphics so I can not get on to my computer to install any new drivers or remove old ones. Can someone please help me.

If you need more information just ask.

ThanksClick to expand...

Check if it isn't your monitor that died!
 

http://www.techspot.com/community/topics/old-graphics-card-died-new-one-has-no-display.174087/
Relevancy 29.24%

I want a case with a FULL size side panel window (not half of one...).
I was looking to get the NZXT apollo, but im not a very big fan of the front.
Can anyone recommend some nice cases? (if it already has LEDs, i need blue ones)
i was looking at the X-jupiter and X-telstar, but im not a huge fan of the way apevia throws their name all over the front.
 

A:Case for $75

Well...what size were you looking for?



This one has full view of the side and is $39 on sale, and the reviews were positive.
http://www.xoxide.com/logisys-communion-case.html




Dimension: 250 x 488 x 540mm (9.8" x 19.2" x 21.3")
Max. Motherboard size: 12" x 10"
Drive Bays: 11
4 x Open 5.25" Drive Bays
2 x Open 3.5" Drive Bays
5 x Hidden 3.5" Drive Bays
Built-in 2 front USB 2.0+ Audio Output
80mm RGBY LED Fan Included
480w SATA Cable Power Supply Included (Compatible to 20/24pin Motherboard)
1 x Rear Fan Mount (for 80mm / 90mm / 120mm Cooling Fan)
Toolless Thumb ScrewClick to expand...


 

http://www.techspot.com/community/topics/case-for-75.174563/
Relevancy 49.88%

MSI 770-C45 AM3 AMD 770 ATX AMD Motherboard
OCZ ModXStream Pro 500W Modular High Performance Power Supply
XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.1 x16 - old video card
ASUS EAH6770/DI/1GD5 Radeon HD 6770 1GB 128-bit GDDR5 PCI Express 2.1 x16 - new video card

Replaced failing Radeon 5770 with Radeon 6770 and now it won't work.

Motherboard LEDs turn on, CPU and case fans turn on. Graphics card fan turns on and then keeps cycling faster-slower every five seconds or so. No signal through VGA or DVI.
The problem persists even when I put the old card back in. What could have gone wrong?
 

A:Tried switching HD 5770 to HD 6770, fans just spin and no display

Any ideas, anyone?

Tried:

Reseating RAM
Resetting CMOD
Reseating both cards
Different cable from PSU to card
Dusting all components thoroughly

 

http://www.techspot.com/community/topics/tried-switching-hd-5770-to-hd-6770-fans-just-spin-and-no-display.174170/
Relevancy 21.93%

Hi I m NEW to THE COMMUNITY I recently had a warning of a rootkit on Oh, display! no! No my computer but before I could complete a virus scan my display on the monitor started to turn lighter and darker then flicker then have squiggly lines So I stopped the scan and did a boot time scan while I was still barely able to see the words on the screen past the pixalated lines The computer restarted and I could barely see the percentage of the scan it said a file Oh, no! No display! was corrupted It appeared to finish the scan and reboot but now Oh, no! No display! no display What the heck How does stella get her groove back I hate this did a virus wipe me out My windows turns on and I can hear the little music when it turns on and the internet wireless light blinks but no display I have tried the monitor on another computer it displays well but something happened to that tower I know it Does anyone know what I can do about it How the heck can I run a scan now when I can t see the display I m blind Woman down nbsp

http://www.techspot.com/community/topics/oh-no-no-display.174360/