Windows Support Forum

HP Pavilion a1410n or A8N-LA Asus motherboard fan solution

Q: HP Pavilion a1410n or A8N-LA Asus motherboard fan solution

Hello After having this HP Pavilion a n for many years now and always having to hear the HP motherboard Pavilion A8N-LA a1410n solution fan Asus or screaming fans whirling away at I have found a solution I did not discover this I found it in little post in one of the many many forums with complaints about this Motherboard s BIOS update problem So I am here only to post another one so that others may find it easier When booting up your computer hit F times and it will enter Setup just the same as if you had pressed F BUT ITS NOT THE SAME Go to the BIOS menu in setup What was once inaccessible in the HP Pavilion a1410n or A8N-LA Asus motherboard fan solution original F setup is now available in the F Setup You can have full control over the fans speed and start up voltage I just discovered this about minutes ago and did it and my computer is quiet as a mouse FINALLY I HOPE THIS WAS EASY TO FIND I spent all day scanning forums for solutions SpeedFan Sucks F dance nbsp

Relevancy 100%
Preferred Solution: HP Pavilion a1410n or A8N-LA Asus motherboard fan solution

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: HP Pavilion a1410n or A8N-LA Asus motherboard fan solution

If your temps are still in a good place, gratz and thanks for the heads up!

http://www.techspot.com/community/topics/hp-pavilion-a1410n-or-a8n-la-asus-motherboard-fan-solution.155502/
Relevancy 79.98%

Hello everyone
I am having trouble getting my computer to pickup the c drive
I formatted my computer using a windows xp cd since the recovery
from the computer would not work. And now it just will not pickup it just restarts and shutsdown. Please help me.
Thanks
etowers
 

A:Hp Pavilion a1410n

Assuming you have an actual Windows XP CD and not a recovery/restore CD:

You boot from the CD.

You delete all the partitions.

You create a new C partition.

You format the new C partition with the NTFS file system.

You install Windows XP.

(The Windows XP CD does all the work.)

------------------------------------------------------
 

https://forums.techguy.org/threads/hp-pavilion-a1410n.737971/
Relevancy 77.4%

My desktop pc is 10 years old and has been running on Win 8.1. It was working fine Wed., but the "power on" button wouldn't work Thur. a.m. Do desktop computers have a battery of some kind? Thanks 

A:HP Pavilion a1410n will not power on. Has a small, blinking,...

Greetings, The blinking green light on the back input/output panel where the power supply is located usually indicates a power supply problem. Kudos to you for the longevity of your PC. Try these troubleshooting steps found here to verify the problem. It would not hurt to replace the motherboard battery. Check the motherboard diagram at lower right corner by scrolling down the linked HP document above (battery). You need a CR2032 battery. The battery is located near the SATA ports.  Please note, HP flips the motherboard 180 degrees . Check top left in the tower for the battery location. Jay  

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/HP-Pavilion-a1410n-will-not-power-on-Has-a-small-blinking/td-p/5596012
Relevancy 55.9%

I am trying to reinstall xp sp Home edition on my older desk top computer as I wanted to upgrade the capacity of hard disk to GB and to eliminate various PC problems My old disk was only GB capacity Here are the specifications for my desk top Desktop is Mesh for which there is no support in the UK it ceased existing a long time ago in UK Mother Board Asus P R -VM Processor unit Intel Pentium chip IXP My old HD which I am replacing is PM - Maxtor Y PO GB capacity My new HD is Quickview Maxtor L PO GB capacity The installation reaches to the stage when it has to write the system files on to the hard disk and it fails The system BIOS recognises P4R800-VM Controller for Driver XP Re-installation Storage motherboard Mass Asus for motherboard the new disk as it is showing it as L PO in the BIOS I have gone through lots of forums and realise that mass storage device driver is not compatible with the new drive or is missing I have even tried to reinstall the system on to the old hard disk to see what happens but it still fails at the same place I do not have manufacturers disk of drivers for my desk top as it came only with recovery disk and no drivers disk I have found all the drivers chip set vga etc from Asus site but do Mass Storage Controller Driver for Asus motherboard P4R800-VM motherboard for XP Re-installation not know which driver is for mass storage Device there Or should it be from Intel site If so what the name would be Please help to get correct mass storage device driver on a floppy disk as I can only insert the driver in the installation process at RAID drivers insertion point I cannot clon old HD either as the drive is already formatted I was trying to reinstall the system first onto the old drive to correct the errors When that did not work I bought Quickview maxtor drive with higher capacity But still I cannot reinstall on the new drive I have an original XP SP Cd from another PC and I downloaded the installation programme on floppy disks from Microsoft site But even this combination does not install the system In this way the system tells me in the middle of the installation that the system cannot copy the file plugin ocx obviously this particular file is not available on the xp sp CD I have I don t know how to obtain it and from where In the end the system cann not copy the files on the hard drive and fails Sorry for the long post as I wanted to explain where I am at the moment in ths process Would be grateful for any advice in this matter nbsp

A:Mass Storage Controller Driver for Asus motherboard P4R800-VM motherboard for XP Re-installation

Almost a word for word copy & paste from THIS forum post made in 2014
@muckshifter the bus inspector should be along soon
 

http://www.pcreview.co.uk/threads/mass-storage-controller-driver-for-asus-motherboard-p4r800-vm-motherboard-for-xp-re-installation.4069314/
Relevancy 55.9%

..........hello,

a simple question......will a HP Pavilion 15-n034sa motherboard fit into a HP Pavilion 15-n083sa ?

help me obi-wan youre my only hope!!

 

A:will a HP Pavilion 15-n034sa motherboard fit into a HP Pavilion 15-n083sa ?

Actually that's a hard question, generally its not possible to install another motherboard, sometimes it is. In this case one is an AMD platform and the other is an Intel platform, there could be tons of differences in mounting holes, physical design, clearance, connectors, heat dissipation requirements, cooling systems, etc. Laptops are not like desktops that use more standardized designs.
 

https://forums.techguy.org/threads/will-a-hp-pavilion-15-n034sa-motherboard-fit-into-a-hp-pavilion-15-n083sa.1143967/
Relevancy 54.61%

My HP Pavilion a1410n won't start. When the power button is pressed, the HDD spins up and there's an intermittent beeping, but that is all.
 

A:HP a1410n won't start

The beeping (without hearing it myself) sounds to me like there's a memory issue. I would recommend running a memory test utility such as one found here: http://www.majorgeeks.com/RightMark_RAMTester_Utility_d4684.html If you get an error after starting a test, pull one of the dimms and test again to help eliminate the bad one(s). Note: MajorGeeks has several free memory testing utilities - I just picked one of them. Best of luck to you!
 

https://forums.techguy.org/threads/hp-a1410n-wont-start.1028564/
Relevancy 54.18%

Dear Users
The anti virus detects it as a virus the direct console.
I strongly recommend clicking ignoring it and adding to exception list of your antivirus software
It should say C:\Program Files\Asus Utlities\Direct Console
When the virus warning pops up
Then restart your laptop
 

A:Solution to Asus Direct Console

ehtray: tray bar process for the Microsoft Media Center- not needed

You can remove this via Startup Control Panel, it lives in:
HKLM "C:\Program Files\ASUS\ASUS Direct Console\LCMP.EXE
 

http://www.techspot.com/community/topics/solution-to-asus-direct-console.107324/
Relevancy 53.75%

Hello all nbsp new to the forums here and decided to join because I have a bit of a problem with my laptop nbsp I did something pretty stupid today I was trying to program a hitachi PLC with my laptop and accidently hooked the ethernet cable up to the wrong port on the PLC the port that would normally connect to a touchscreen HMI with the result that my ethernet port on my laptop got fried After a few seconds smoke started coming out of my laptop from underneath the keyboard so I quickly janked the ethernet cable out It was only in there for a few seconds but the damage was already done nbsp On the bright side everything seems to be working OK still Wifi is also still working Only problem is that this laptop has only one ethernet port and I really need that port nbsp I took the cover of but nothing obvious pops out I know it's kind of a vague question to ask but would anyone have any ideas on what pavilion hp ethernet fried.. solution..? 11 port might've broken and how to check what might be broken hp pavilion 11 ethernet port fried.. solution..? and what not nbsp I'm not verry familiar with computers by the way so excuse my lack of knowledge nbsp Many thanks in advance

A:hp pavilion 11 ethernet port fried.. solution..?

What is the complete product name or product number of your notebook? If your notebook has usb ports available then the solution would be to purchase a usb to ethernet adapter. They do work quite well.  Otherwise you will need to have the systemboard in the notebook replaced.    You can even purchase one at Walmart if you happen to live near one.https://www.walmart.com/c/kp/usb-ethernet-adapter

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/hp-pavilion-11-ethernet-port-fried-solution/td-p/5742360
Relevancy 53.32%

I bought and installed two 1 gig ram cards on my HP a1410n desktop. The ram that came with the pc is a total of 1 gig (2 half gig cards). The pc recognizes any memory I put in the first 2 slots (whether it's the half gig or 1 gig) but will not recognize anything I put in the 3rd or 4th slots. I'm putting the 2 half gig cards together and the two 1 gig cards together. Am I doing something wrong? When I check the BIOS, it says the 3rd and 4th slots are empty, even though I have memory cards in them.
 

A:HP a1410n doesn't recognize last 2 ram slots

Here's an update: As I mentioned before, when I put 1/2 gig in each of the 1st 2 slots, the pc recognizes both of them. When I put 1 gig in each of the 1st 2 slots, the pc recognizes them as well. Here's the kicker... I put 1 gig in each of the 1st 2 slots and 1/2 gig in each of the last 2 (3rd & 4th) slots. Now the pc is recognizing 3 of them, but not what logic would dictate. Here's what's in BIOS:

Installed memory 2048MB/PC3200
Memory Bank 1 512MB/DDR SDRAM
Memory Bank 2 1024MB/DDR SDRAM
Memory Bank 3 Not Installed
Memory Bank 4 512MB/DDR SDRAM

What doesn't make sense is memory bank 1 (if that's the first slot) has 1 gig of memory in it, not 1/2 gig as reported in BIOS. I double checked and even removed and reinstalled all the memory and got the same results. HELP!!
 

https://forums.techguy.org/threads/hp-a1410n-doesnt-recognize-last-2-ram-slots.813353/
Relevancy 52.46%

I have bought Intel 630 Pentium 4 HT 2Mb L2 800MHz LGA775 prescott Processor, Kingstone 512 MB 400Mhz Ram, 40 Gb Seagate baracoda 7200RPM HDD, MSI 6600Gt NX6600Gt TD128E SLI pci-e. I have selected ASUS Motherboard P5RD1-V http://www.asus.com/prog/spec.asp?m=P5RD1-V&langs=01

I want to ask that does this mobo support EM64bit tecnology? Does this mobo support all my purchased items?

I have one more option
Buy ASUS P5RD1-V or Intel D915GAV ?
Intel Motherboard D915GAV http://www.intel.com/design/motherbd/av/index.htm

Does D915GAV support both EM64T and Enhanced Intel speedstep technology?
 

A:Does ASUS P5RD1-V support EM64T? Buy ASUS P5RD1-V OR Intel D915GAV Motherboard?

Hmmm?

I'm not too sure about mixing up the nVidia cards in sli with
the ATIŪRADEON XPRESS 200
ULIŪM1573
I would research this board further.

The IntelŪ Desktop Board D915GAV on the other hand
seems to have what you've asked for:
EM64bit and sli and the Enhanced Intel speedstep...
 

http://www.techspot.com/community/topics/does-asus-p5rd1-v-support-em64t-buy-asus-p5rd1-v-or-intel-d915gav-motherboard.32360/
Relevancy 51.17%

Well My problem is regarding the Secondary IDE channel port Solution needed drive Motherboard is - malfunctioning port interface on the motherboard of my desktop PC My motherboard is Intel D GVAD MicoATX Factor Well Earlier each desktop motherboard has got IDE interfaces - Primary amp Secondary On each IDE interface upto IDE drives can be connected using dual IDE cable - called Master and Slave drive BY convention the primary IDE port is for HDD and secondary IDE port is for ODD but we can reverse it Isn t it So the problem I am encountering Solution needed - Motherboard drive port is malfunctioning is that when I connect two ATA IDE HDD to the secondary IDE port the Operating System won t load I only get a blank screen after POST Only when single HDD is connected to this interface then only the OS loads and computer works But this must not happen This is not normal Similarly when I connect ODD DVD burner to the secondary port the computer boots but only when Solution needed - Motherboard drive port is malfunctioning I manually Solution needed - Motherboard drive port is malfunctioning set each ODD data transfer mode to MWDMA multi word DMA within IDE configuration in BIOS Otherwise the BIOS uses the faster UDMA mode but in this mode the computer just won t boot the windows OS freezes just after few seconds after it starts to load even though these ODD support UDMA transfer mode Earlier there was no such problem Also when I installed these HDD drives on the primary IDE interface the computer started without problem and BIOS used UDMA mode for both the drives Same for ODD This proves that that there is no problem in HDD or ODD or IDE cables or BIOS Problem is in the motherboard which has got the IDE interface I checked the secondary IDE channel properties in device manager in Windows XP and it tells that this device is working properly There are no resource conflicts too So what exactly has gone wrong with the motherboard I want this answer from you experts I tried everything possible but it didn t work I am not a hardware motherboard engineer expert Is there any setting which might got changed which is causing this problem then is there a way to reset the motherboard to default factory setting Thought I have never changed any motherboard setting Also the H W settings in the device manager are automatic and disabled Or if a component on the motherboard has got damaged then which is that component Yes one thing I must tell before this I used the secondary IDE channel to connect SATA HDD to the motherboard using an IDE to SATA converter device as my motherboard has no SATA port The SATA HDD worked fine But as long it was connected the red LED on CPU was continuously ON Did this cause damage to the motherboard IDE interface If it is due to damaged component on motherboard then could it get replaced repaired The place where I live has no Intel service centre But do Intel service centres resolve fix such problems What can I do Other than this the motherboard has got no other problems Please help Tech Support Guy System Info Utility version OS Version Microsoft Windows XP Professional Service Pack bit Processor Intel R Pentium R CPU GHz x Family Model Stepping Processor Count RAM Mb Graphics Card Intel R G GL GE PE GV Graphics Controller Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB E Total - MB Free - MB F Total - MB Free - MB G Total - MB Free - MB H Total - MB Free - MB I Total - MB Free - MB J Total - MB Free - MB Motherboard Intel Corporation D GVAD Antivirus None nbsp

A:Solution needed - Motherboard drive port is malfunctioning

OK, first you need to understand that the 845 chipset [which your board uses] was released in 2002. That makes the mb at the very least 10yrs old. Nothing lasts forever and I think you have received very good service from these parts.

While it is possible to get it to work using an add-in controller card, doing so is NOT cost effective and you would still have a 10yr old system.

The choices for an ata type pci card are very limited due to the age of this type of hardware. Here is an example of what you could use to fix the problem; again I do not recommend putting any money into this old of a system.
http://www.newegg.com/Product/Product.aspx?Item=N82E16816115016

Once computer hardware is 3yrs old or more, it makes no sense to spend money on repairing said hardware. It is cheaper to replace with more modern hardware.
 

https://forums.techguy.org/threads/solution-needed-motherboard-drive-port-is-malfunctioning.1106059/
Relevancy 49.88%

I have a Pavilion a4000. The mobo Pegatron m2n78-la failed so I bought an Asus M5A88-M. The problem is the front panel pins on the computer are all in one case while the ones coming off the mobo are in three cases. Is there an adapter I can get to fix this?
 

https://forums.techguy.org/threads/asus-mobo-in-pavilion-a4000.1084320/
Relevancy 49.45%

Dear Team,    Recently, I found out the display card giving problems, So I bought a new Asus GT730 2GB Display Card. From the startup screen, it only display HP logo, single beep, wait a while ....single beep again.....wait a while .....single beep.....no display on the screen already.   May I know the new display incompatible in this PC? In what way, I can test it?   I'll appreciate for your kindly reply.  Regards,

A:Can't install new Asus GT730 2GB on Pavilion HPE h8-1090d

Tflai, welcome to the forum. The GT 730 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't begin using UEFI until mid-October, 2012.  There is no way to add UEFI to the motherboard.  The last series of video cards that didn't require UEFI were the GT 640's.  I suggest contacting the manufacturer's Tech Support for help in choosing the best card for your computer. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved. 

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Can-t-install-new-Asus-GT730-2GB-on-Pavilion-HPE-h8-1090d/td-p/5615412
Relevancy 49.02%

Hi,I need to buy a motherboard for my hp pavilion dv6 (model dv6-6b02TX). The motherboard part number is 665343-001. Do I need to buy the same part number to fit in? I can't find motherboard with this number in eBay. I find some motherboards bearing the number 665342-001 and 665348-001. Can anyone of you please answer me? RegardsQuamru.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Motherboard-for-hp-Pavilion-dv6/td-p/5787794
Relevancy 49.02%

Hi there. Hope everyone is fine.I have an HP DV6 6104EA Notebook and need to change its motherboard which is with the part number of 650850-001.Is it possible to replace it with part number 650851-001 which is with higher graphics memory. Please help me out on this one I really need your assisstance.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/hp-pavilion-dv6-x64-motherboard/td-p/5846783
Relevancy 48.59%

Hopeing someone can help
Built my first box with above motherboard and found supplied cd not compatible with vista business 32bit. Searched ASUS website. Found that they have a listing for Vista. Dowloaded and installed. Everything working except for "device driver not installed" for simple PCI controller. Searched for more drivers but can't find one. Anyone else had same problem or can anyone suggest a solution. When I try to update the driver, vista cannot find a driver on the web, installation cd, or the folder that I have downloaded the new software too!!

Thanks
 

Relevancy 48.59%

ANYONE out there who has built a PC designed specifically for Home Media usage EG: movies, photos, etc ( not gaming) using a ASUS Intel motherboard 775, CPU E8400, P35, XP PRO, as I'm unsure which board might be the best all rounder.

thanks.
 

A:asus motherboard

Have you chosen the computer case you are going to use yet?

For a home media PC, the one defining factor is available "space". (meaning how large of a computer case are you going to use?)

A smaller case may limit you a Micro ATX or smaller MB, low-profile video/audio card or integrated video/audio, low profile CPU heatsink/fan, etc. A smaller case will also mean a lower power PSU which may also limit your choice of other parts.
 

https://forums.techguy.org/threads/asus-motherboard.759096/
Relevancy 48.59%

Hi, I have a ASUS A8N-SLI Deluxe and i was wondering if a 20 pin PSU will be ok for it. For now it has an Athlon 64 3700+ 1MB L2 Cache and san diego core, 512 kingston PC3200 and a 2D 8mb PCI Matrox Mystique.

I just need it to run until I get a 24Pin PSU in about a month
 

Relevancy 48.59%

is there a better..

motherboard rather than asus? just curious...
 

A:is there a better motherboard than asus?

It's all a matter of opinion, there is no "better" motherboard. One company's board has several great features and other less great features, missing features etc that other companys board might make up for but yet have it's own flaws also.

You just have to figure out which board has the features that you need and can take advantage of for, also considering the price, compatibility, etc.
 

http://www.techspot.com/community/topics/is-there-a-better-motherboard-than-asus.8852/
Relevancy 48.59%

I have a asus motherboard and am having some problems.
Does ASUS have a tech help department?
I have sent numerous e-mails to [email protected] with no reply.
I can not find a phone number for the USA either.
 

Relevancy 48.59%

Hey First of all I would like to thank brindle for your help with the first problem I had I dl d the everest program and it worked great gave me all the info I was needing And help Getting my asus with motherboard I Getting help with my asus motherboard didn t know how to post the message to the thread here for others to see I m still a newbie to this forum thread thing and still trying to learn how to use Getting help with my asus motherboard it So please be patient with me Ok here is my situation I have found I have the asus P L -S motherboard With a Pentium II processor and LX AGPset I have all the specs I needed to get help but the asus website is not helping me I got this computer from a yard sale don t laugh its newer then the one I had And it was built by someone not a company I didn t get any manuals or install cds for the motherboard and graphics card and that is what I am needing in order to fix the bios and scsi things going on with this And I don t know what a socket is in reference to I see some of you know what it is and how to figure out what the number is for motherboards If I knew that maybe I could dl the bios and stuff I am needing to get the motherboard set up right any suggestions will be greatly appreciated nbsp

Relevancy 48.59%

Hi, I happened to have an old motherboard lying around, so I decided to make a computer out of it. The problem that arose was that I attached a 12v molex connector to two wires with another connector which leads to these pins that usually you would attach the case power and HDD Light and Power Light. When I did this I booted up and the board would not start. I know I did something wrong, that I fed it 12v, and possibly might have fired it. Any clue to how I could get it running again???

Here is the .pdf for the motherboard manual http://www.solorb.com/gsale/p2bf-103.pdf
 

http://www.techspot.com/community/topics/asus-p2b-f-motherboard.66520/
Relevancy 48.59%

Hi everyone.Could anyone point me in the direction of a diagram of an Asus P4S800 motherboard as I need to reinstall front USB and powerbutton wires from front of computer box to circuit board.

Long story of how they became diconnected.

p.s we have mislaid our manual.

Thanks.
Darren.
 

A:Asus Motherboard help

Asus has a pretty good site, and these files are easy to find:
http://support.asus.com/download/download.aspx?modelname=P4S800&SLanguage=en-us
 

https://forums.techguy.org/threads/asus-motherboard-help.701868/
Relevancy 48.59%

Which is better Asus P4B-266, P4B-266-C, P4B-266-E, P4B-266-M, or P4B-266-SE? Which one has the most features?
 

A:Asus Motherboard

best I can do is link you to a review, seems they liked it
http://firingsquad.gamers.com/hardware/p4b266/default.asp
 

https://forums.techguy.org/threads/asus-motherboard.72566/
Relevancy 48.59%

I just purchased a new asus p4t motherboard and P4 1.4 GHz cpu. i just can't figrue out how to set the clock and multiplier dip switches. asus is no help. the cpu says 400 MHz FSB, but i really don't know what that means

i can choose from 100 to 150 on core speed and multi form 6.0 to 18.0. should i chose 100 with a 14 multiplier to get my 1.4 GHz?

Please Help with settings.

bill
 

A:asus P4T motherboard

100 x 14 is default
 

https://forums.techguy.org/threads/asus-p4t-motherboard.45623/
Relevancy 48.59%

I have a ASUS M A Motherboard I now have motherboard help M3A Asus a BIG problem that I need some advice on Surrounding the white CPU AMD Athlon socket is a black support ring screwed into the motherboard that the CPU fan heat-sink attaches to The metal clips on the fan heat-sink fit on Asus M3A motherboard help small tabs on the edge of the black ring to hold it down The black ring is plastic And because of this one of the plastic quot tabs quot that the metal CPU fan heat-sink clips onto broke off Because of this I can t hook clip the heat-sink to this support Asus M3A motherboard help ring I am trying to use epoxy to glue the tab back on but do not know if this will hold I contacted ASUS and they said the MB is not in stock anymore Does anyone know if I can just replace this black support ring I really don t want to replace the motherboard All I need is the small black ring that supports the heat-sink fan over the CPU Would anyone have this board and does not need this part I am up the creak without a paddle guys Any help Scott nbsp

A:Asus M3A motherboard help

Never mind.. found one here:

Never mind.. found one here: http://www.heatsinkfactory.com/retention-hardware.html :grinthumb:wave:
 

http://www.techspot.com/community/topics/asus-m3a-motherboard-help.172728/
Relevancy 48.59%

Does anyone use the Asus P3C-E motherboard? Good, Bad, Other
wise? Need your comments, please Thanks
 

A:Asus Motherboard

There are plenty of reviews out there....Look it up on google.
 

https://forums.techguy.org/threads/asus-motherboard.62057/
Relevancy 48.59%

I just installed the ASUS board.
I'm getting an "i" in device manager for:
1) Ethernet Controller
2) PCI Simple Communications Controller
3) Unknown device

I have the DVD, but NOT sure where or if the drivers reside on this disk as No
Table of Contents is provides only directories with "obsure" names.
Windows Update cannot find a driver for the above.

Any help appreciated.

A:ASUS Motherboard H97 Plus

Hi Drivers are in the Link below ...
Motherboard - H97-PLUS - ASUS

Install the Lan Driver and the Chipset

http://www.sevenforums.com/drivers/354738-asus-motherboard-h97-plus.html
Relevancy 48.59%

how many vga on board asus p5gl-mx, p5s800 sis 661
plz answer emergently!
 

A:MOTHERBOARD asus

Why don't you look for yourself ?
Asus p5gl-mx
Asus p5s800
 

http://www.techspot.com/community/topics/motherboard-asus.43006/
Relevancy 48.59%

My original Asus P5ND2-SLI Deluxe doesn't work anymore so I have to replace it. From the beginning I always had issues with the POST and would have to restart from the back of the computer. I'm looking for another MOBO that supports Intel Pentium 4 EE. Looking at other ASUS motherboards I read the same issues with booting. I'm obviously not alone with the previous problems. Does anyone have any other suggestions for good boards that are just solid and consistent? There seems to be a decent ABIT one. I guess I don't want to spend $200 or more on something that's going to give me the same problems. Any help would be greatly appreciated. Thanks.
 

A:Asus Motherboard

I think the Asus boards arent completely solid until you buy p5n32 or better, if you pay 100 or so for a board of course not as good quality is put into it. I have the p5n32 sli premium. Its a champ.
 

http://www.techspot.com/community/topics/asus-motherboard.71792/
Relevancy 48.59%

I have a mesh pc withe above motherboard and running windows xp home. the pc crashed with a blue screen telling me it had shut down to prevent damage to my pc. i concluded that my problem was my hard drive so I bought a new one. while removing the old one I inadvertently pulled soma wires off the pins at the bottom rh side of the some next to the pc speaker connection. I have a green/white wire, the green is marked with a + and the white a - these are separate connectors. I cannot see where these should be connected. the other are two wires on one connector.orange and white, blue/white, and two grey wires. some have names where they should go but should they be connected horizontally or vertical.
Any help would be appreciated

Ian Matthews
 

A:asus a8n-e motherboard

ASUS_a8n-e Scroll to page 45, "System Panel Connector" I think that this is what your talking about.
 

https://forums.techguy.org/threads/asus-a8n-e-motherboard.572921/
Relevancy 48.59%

What's the BEST ASUS motherboard available for P4 3.4Ghz?

I've been looking at the Asus P4C800 Deluxe; it allows RAID to be used so that's a definite plus.

Thanks guys,

Hamster.
 

A:BEST ASUS Motherboard

the P4C800 is a nice board, i would get this if i were building an intel system, but im an amd guy so its all about the A7N8X-E for me. get the P4C800, its will be top end for a while, but its costly. if money is the problem, find a board with the i865PE chipset or equivalent. the IT7-MAX3 is an abit board that is also high end. i think its the IT7, but its the only MAX3 board abit has, take a looksie, because asus board tend to be more expensive, so shop around.
 

http://www.techspot.com/community/topics/best-asus-motherboard.12116/
Relevancy 48.59%

Hi Hoping you can help Bios Info Version Pentium R Duo Core CPU E s GHz Motherboard ASUS P Q SE Samsung SATA Madel HD LJ g I kept receiving Activation PopUps and MicroSoft set me up with a custom reload when no activation numbers showed Having the OldWindows ASUS P5Q SE Motherboard before and not liking the set up I decided to wipe the Sata and start fresh Spotmau is a program that I have used many times when I would like a harddrive cleaned -always thinking that a cleaned disc would be better than just writing over the top of the old Thing is I ve only ever used Spotmau in XP with No problems - Not Vista I used an old computer Motherboard ASUS P5Q SE just freshly loaded with XP and wiped the data and formatted the drive Not only did it wipe the hard drive but when I went to load Vista I found No Bios Receiving one long beep and short beeps I clearded the COSMOS and the Bios returned But when I went to load Vista it looks like the Drivers for SATA have been wiped as well I changed the Bios Boot loading around - cd drives - SATA Hardrive - No difference The message that I received - I did not write it down - but it mentioned No SATA Drives and asked for a floppy I have the floppy BUT no floppy drive I tried the mother board disc with No success I downloaded the SATA drives from the internet but when trying to reload Vista it doesn t seem to register them Thinking that the drives would be on the MoBo disc seems to say that it s not the SATA drives it relly wants The message I m receiving now when trying to load Visata is quot Windows cannot be installed to the hard disk space The partion contains one or more dynamic volumes that are not supported for installation quot I formatted the disc again - just incase - No luck When starting with just the Motherboard disc I receive the message quot Welcome to ASUS Motherboard Make A Disc Fort DOS Menu That s ALL I get from the MoBo disc And when trying to load The Vista OS I get to just after adding my activation code for the th time and it asks for the drivers Go through all the drivers on the disc as well as the MoBo disc and try the downloaded sata drives ALL again and the only message I get is quot Windows cannot be installed to the hard disk space The partion contains one or more dynamic volumes that are not supported for installation quot Any ideas I m just about pulling my hair out Hope to hera from you soon Thanks heaps Louise nbsp

A:Motherboard ASUS P5Q SE

OK.... So I found out that it's the motherboard... I tried a IDE harddrive with XP and.... NOTHING !! AARRGG !!

Goes through the BIOS fine... then just a blank screen...

I tried the XP disc... nothing

I tried a bootable disc... nothing

Just a blank black screen with a cursor flashing up top....

Can anyone help?

Do you think it's salvageable???

Louise
 

http://www.techspot.com/community/topics/motherboard-asus-p5q-se.142017/
Relevancy 48.59%

Hey guys help motherboard ASUS I built my computer and I ASUS motherboard help ve always had a little trouble with it but today it just stopped working I turn it on and the fans start and the lights come on and all that good stuff but nothing happens Normally a voice comes on and tells me that quot system failed VGA test quot or quot system failed memory test quot and then I go and check on those things Now when I start it up I don t get a voice and the computer just runs but nothing happens I ve tried taking out the RAM and starting it up because normally it will just shut itself off if there s no RAM but not anymore I ve taken out the video card the RAM the HD and all three at the same time but the computer keeps on running instead of just shutting itself off or giving me an error message I know I have an ASUS motherboard but I don t know the exact model I can probably find out if that helps So any ideas on what s wrong I d really rather not pay some guy to fix my year old computer Thanks a bunch nbsp

A:ASUS motherboard help

It could be a motherboard problem. If it has told you that it failed both a VGA test and a RAM test, you can assume that it is not those components at fault. Do you have another motherboard to test in it?

You might also try testing the power supply, but I doubt that is the culprit.

Lastly, welcome to TechSpot! :wave:
 

http://www.techspot.com/community/topics/asus-motherboard-help.71577/
Relevancy 48.59%

i just bought this motherboard from a a friend of mine, he does not remember when took the board out, what the sequence of the power led, power sw, reset sw, and the speaker leads went. this k7m is not the same like the others. everthing is different. what can i do. i need a little help if someone can help thank you.
 

Relevancy 48.59%

i m using ASUS P4V533-MX motherboard.i want to know that is there hotkey on the startup(starting computer) to select the hard drives to boot the operating systems, without entering in the bios settings.
like i had intel D84GEBV2 motherboard and i used F10 key to access the option to boot form the available drives.
 

A:Help Regarding ASUS(motherboard)

F8 is what I think you are looking for.
 

https://forums.techguy.org/threads/help-regarding-asus-motherboard.334361/
Relevancy 48.59%

Hi,
Can anyone tell me whether the ASUS motherboard P4GL-MX based on Intel 845 GL chipset support Intel Celeron 1.7 GHz?

The company's web-page http://www.asus.com/prog/spec.asp?m=P4BGL-MX&langs=01
talks only about it supporting the Intel Pentium 4 with 256/512 KB L2 cache so i wondered whether it would support a Celeron with 128 KB L2 cache.

Thank you.
 

A:Regarding an ASUS motherboard

Yippers, it does support it.

http://www.asus.com.tw/support/cpusupport/cpusupport.aspx
 

https://forums.techguy.org/threads/regarding-an-asus-motherboard.159285/
Relevancy 48.59%

hey guys, i just re-installed Windows XP SP3 on this machine running the A8N-E and i can't find the LAN driver or the general drivers anywhere. i came across this: http://support.asus.com/download/download.aspx?SLanguage=en-us but it doesn't have the full drivers or anything for the LAN to work.

i know there are sites out there that have the drivers, but these seem dodgy or illegimate with viruses. are there decent sites out there?

thanks
 

A:ASUS A8N-E Motherboard

http://www.asus.com/product.aspx?P_ID=DzbA8hgqchMBOVRz&templete=2
 

https://forums.techguy.org/threads/asus-a8n-e-motherboard.936752/
Relevancy 48.59%

I sent my ASUS P5LD2 motherboard to ASUS for repair. This is what they said was wrong "bios error due to image crashed, relashed the bios and unit checked out fine. Can anyone tell me what this means?
 

A:ASUS Motherboard

ReFlashed the bios.
They have updated the BIOS firmware on the computer


Here's ALL your drivers (unknown OS at the moment)
And here's the current BIOS
Version 1903
Support new CPUs.
File Size 433.28 (KBytes)

or

Version 1904 2008/01/07 update
Description P5LD2 Latest Beta BIOS
File Size 433.37 (KBytes)
 

http://www.techspot.com/community/topics/asus-motherboard.98299/
Relevancy 48.59%

I recently bought an Asus A V-VM SE Motherboard It arrived today I quickly installed it into my case inserted the new AMD Athlon X dual core processor and heat sink I connected the cases wires for power button reset button HD LED PWR LED and Speaker to the motherboard I wanted to do a quick test the reason I got the new motherboard was because my old one died or at least I m hoping it did I plugged in the power cable to the PSU The green light of happiness turned on on my mobo So far so good I hit the Power button on my Case and nothing happens nothing at all I ve double checked to make sure the wiring is correct it is I ve swapped reset button with power button just in case Still didn t work I even wondered if the motherboard was too clever So I installed everything else into the motherboard RAM GPU all other cables etc Still Nothing Also got out my old PSU still workng and tried that The green light on the motherboard came on but still nothing worked through use of the power button Should I presume this motherboard is DOA or is there anything else someone might want to suggest that could help I ve tried to please. Asus DOA? Help Motherboard be as detailed as possible And any suggestions are welcome Thank You in advance nbsp

A:Asus Motherboard DOA? Help please.

What size is your power supply? You may just need a 450-500 watt power supply.
 

http://www.techspot.com/community/topics/asus-motherboard-doa-help-please.73627/
Relevancy 48.59%

Put in new Asus motherboard with Athlon Xp processor The hard drive I have was already loaded with Windows XP and worked perfectly with old motherboard and processor The new system Asus in new Put motherboard will not recognize the hard drive It will see it in Put in new Asus motherboard cmos but will not allow access to it Even if I try to boot from Windows XP cd it will go only as far as it begins to copy to hard drive and then it freezes up When I try to boot from the hard drive the system tries and then simply reboots comes up to the screen where it wants you to choose whether to start windows normally or safe mode Whatever option is chosen it tries and then automatically reboots back to the same screen What am I missing HW System Type Desktop Tower Operating System Windows XP Processor Type AMD Ammount of RAM MB Hard Drive Capacity GB Video Card Manufacturer ATI Internet Connection Speed k Monitor Size quot Printer Manufacturer Cannon Printer Type Ink Jet CD-ROM x Scanner Network Card Mbps nbsp

Relevancy 48.59%

hi, my partner has a m2ns/nvm/s motherboard and for some reason has lost the disk... obviously he didnt tell me this before formatting, i was wondering if anybody knew where to download the drivers for it, i have tried several myself, but they arnt correct, thanks.

mobo: m2ns/nvm/s (he needs, all the drivers)
 

A:asus motherboard

Asus support site?

http://support.asus.com/download/download.aspx?SLanguage=en-us
 

https://forums.techguy.org/threads/asus-motherboard.831589/
Relevancy 48.59%

I am trying to find out where the power switch wire , speaker wire, reset wire from the case connect to the ASUS 450/2 mhz motherboard. It may be a ASUS 800mhz motherboard--not sure--can not power it up--LOL. I am trying to build a computer from all my spare parts for a friend of mines little 5 year old to play his games on. There is a 20 pin (2 rows of 10) and behind it an row of 7 pins in the upper left corner of motherboard if the power supply connection is at the bottom of the board. The only markings on the motherboard is the name ASUS PSA
 

A:ASUS 450/2 motherboard

try http://www.elhvb.com/mobokive/archive/Asus/sock7/ali/p5a/p5a-106.pdf
will be similiar hopefully
 

https://forums.techguy.org/threads/asus-450-2-motherboard.962129/
Relevancy 48.59%

Recently I purchased a Asus H-81 gamer and married it to 2x4 gb Cosair modules, a Celeron G1840 processor and a Seagate 500 gb SATA III Hdd and when Itried to load the XP system the computer said that the HDD was corrupted. what am I doing wrong, and how do I fix it??
 

https://forums.techguy.org/threads/asus-motherboard.1158299/
Relevancy 48.59%

Hello, I need to buy a motherboard for my HP Pavilion DV6-3060EZ.I surfed all around the internet, but I can't find the right one/which one I should buy.On my original HP mb (which is now burnt) there are:Sticker: Replace w/ HP spare: 615278-001  (and bellow 7F1074)On motherboard: DA0LX6MB6G2  REV: GI have Intel Core i7 720 QM and socket on original MB is rPGA 989 What about this one:  Original laptop motherboard for HP Pavilion DV6-3000 615278-001 DA0LX6MB6G2 HM55 HD5650 1GB PGA989 D... ?Do you think it will work? Thanks for any advice!   

A:Motherboard for HP Pavilion DV6-3060EZ

Why would it not? Same part number. 

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Motherboard-for-HP-Pavilion-DV6-3060EZ/td-p/5799474
Relevancy 48.59%

Can anyone help me find the detailed specs on this computer (HP Pavilion a111on? I really just need to know what kind of a motherboard I have, I can't tell if it's an ATX or micro-ATX motherboard. Anyone know what the difference in measurements are?
 

A:HP Pavilion a111on motherboard

MicroATX is 244 x 244 mm.
Download and run Everest from www.majorgeeks.com and it will tell you more about the motherboard - then you can google for more details.
 

http://www.techspot.com/community/topics/hp-pavilion-a111on-motherboard.86686/
Relevancy 48.59%

I put the motherboard in a new case. I am trying to connect the front panel buttons. I can't get the reset switch to work. I can't find a layout diagram of this motherboard either.
 

A:cognac motherboard in hp pavilion

Do you still have the case the motherboard came out of? If so trace the front panel connectors back to the source and go from there.
 

https://forums.techguy.org/threads/cognac-motherboard-in-hp-pavilion.165198/
Relevancy 48.59%

Please my motherboard is a Core i7 motherboard but fried.I want to get a replacement but there's no identification number.So I need help with the identification number(eg. xxxxxx-001 / xxxxxx-501) and I would also appreciate if I am told how much it would cost to replace it

A:HP PAVILION 17- F210NS MOTHERBOARD

The Part Number for the laptop is M1L45EA # ABE

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-PAVILION-17-F210NS-MOTHERBOARD/td-p/5785926
Relevancy 48.59%

Help,
I asked you guys about a diagnosis of a bad motherboard in an HP pavilion. We were all pretty much in agreement about the bad board. Well, I bought a new one and now comes the task of replacing it. Is it difficult? (I am e-literate) How much should I pay to have it done? Any help would be FAB!
Thanks,
Lisa
 

Relevancy 48.59%

Hello. The motherboard in my DV7 has gone the way of the dodo. HP Parts does not have it available for order, and the "recommended" resellers ... aren't. I've scoured the 'Net, and actually found and ordered one, but the next day received word that the vendor could not, in fact, get the board. A couple phone calls to other potential vendors netted the same result. It seems the motherboard is hard to come by. Anyone have any ideas or recommendations? System: HP Pavilion DV7T-6C00 Quad Core 64-bit / Prod# A1L77AVMotherboard: 665991-001 / PCA SYS BD HM65 DSC 6770/2G QUA Any help would be greatly appreciated! Regards,Kevin

A:Looking for Pavilion DV7 Motherboard: 665991-001

Several on eBay, all coming from China or Sri Lanka. I have had fairly good luck with motherboards purchased this way and if you pay with paypal you have pretty good protection. There do not appear to be any other options: http://www.ebay.com/itm/For-HP-Pavilion-DV7-DV7-6000-Intel-motherboard-665991-001-100-tested-OK-/262...

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Looking-for-Pavilion-DV7-Motherboard-665991-001/td-p/5616011
Relevancy 48.16%

Team:
I flashed my bios and I had to hard boot because system froze now i get this message BIO ROM chechsum error.

Can I boot from (a) or cdrom drive into dos and flash bios? If so can someone recommend a software that I can boot from to get job done.
 

https://forums.techguy.org/threads/asus-p5bw-la-on-a-hp-pavilion-media-center-tv-m7780n-desktop-pc.1066159/
Relevancy 48.16%

I have been looking at purchasing an ASRock(by ASUS) X533 Motherboard along with a P4 processor to upgrade my system. Please let me know any good or bad points/comments/opinions on this board and what would be a suffient size AGP video card to buy for normal computer usage. No intense game playing.

Thanks
James
 

A:Asus Motherboard Upgrade ?

http://www.newegg.com/app/viewProduct.asp?description=13-130-426R&depa=0

how much are you planning on paying for it? i would prefer the one i linked to above, unless you are getting a really cool deal on the one you mentioned. it has onboard vga, lan, and audio.
 

https://forums.techguy.org/threads/asus-motherboard-upgrade.178320/
Relevancy 48.16%

hi! i have ASUS A7S333 motherboard and AMD processor and 256MB RAM. i have a hard disk of 10GB. the problem is that it hangs whenever i try to install XP operating system. and i have problems with the sound and the system gets hanged frequently. i have installed WIN98SE on my system. can someone help me how to install XP on this system and the mother board utilities?
 

A:asus motherboard troubleshoot

Hello and welcome,
10GB hard drive is a little small for XP. I would go with a 40GB minimum. You can go to the Asus Support website and download the motherboard utilities after you install XP. It is possible that you might need to update the motherboards bios before you can install XP. You need to make sure that the motherboards bios are set to Failsafe Defaults and take out any network, sound or USB cards before you start installing XP. After the XP install completes, you can reinstall everything
 

http://www.techspot.com/community/topics/asus-motherboard-troubleshoot.67867/
Relevancy 48.16%

Okay I have a Asus P LD Deluxe Wifi-TV Socket Motherboard Intel Pentium D Ghz FSB Socket Corsair XMS TWINX MB PC DDR MHz X XFX GeForce GS MB PCIe w Dual DVI And Asus Motherboard issues. an Ultra Grid MID ATX Case with a w mod PSU my problem is ha it will boot w all LEDs no beeps running Hd and fans but no monitor and then it will turn it self off Im wondering if the memory I have is not compatible I dont know why cos it Asus Motherboard issues. s mhz DDR DualChannel that the mobo specs Asus Motherboard issues. said it would support I know times out of ten the motherboards just shorting out on the case but I dont think thats the prob but had one question if the cpu fan is not plugged into the mobo could this cause an error cos I have a test fan setup that I use that is not hooked into the mobo for easy access when overclocking and checking heat ratio but is that what s causing it to turn it self off help would be greatly appreciated nbsp

A:Asus Motherboard issues.

Do this right away.Install asus Probe.It's on the cd or a download.
Did you install the cd extras.You need the AGP installed.
I hope you have a cd and a manual,or dl one.
 

http://www.techspot.com/community/topics/asus-motherboard-issues.68368/
Relevancy 48.16%

My new mobo and its accompanying DVD were working fine with one exception; 2 older cd's (on IDE cable and connector) from my previous computer; which held my dearest programs, were now non- existant. The ASUS cd hinted that another boot program might be the answer. Having been away from computers for 10 years I stupidly embarked on this quest. The result: no boot. Can anyone suggest a cure or a cd (preferably not ASUS), or anything which will help me?
Thank you !
 

https://forums.techguy.org/threads/asus-p5n73-am-motherboard.816126/
Relevancy 48.16%

i bought a asus A8v-VM SE motherboard and from the internet specs its supposed to have a realtek card onboard it however the computer isn't finding it does anyone know why and where i can find a driver for said sound device
 

A:asus motherboard but where the sound

Have you tried the Asus website?
 

https://forums.techguy.org/threads/asus-motherboard-but-where-the-sound.572239/
Relevancy 48.16%

Hi everyone.
I have ASUSTek Computer INC. K8V-XE motherboard and I am considering buying a new hard drive. I wonder if a SATA II drive would be compatible with such motherboard?
Thank you for helping : )

Sorry for the silly mistake in the heading
 

A:Queston about ASUS K8V-XE motherboard

Yes. Here is the spec page.
http://asus.com/product.aspx?P_ID=qhs3pLIVcQE9Z91s&templete=2
 

https://forums.techguy.org/threads/queston-about-asus-k8v-xe-motherboard.887590/
Relevancy 48.16%

Board ASUSTeK Computer INC TUV X REV xx Bus Clock megahertz BIOS Award Software Inc ASUS TUV Problem Motherboard ASUS X ACPI BIOS ASUS Motherboard Problem Revision Windows XP Professional Service Pack build megahertz Intel Pentium III kilobyte primary memory cache kilobyte secondary ASUS Motherboard Problem memory cache Megabytes Installed Memory The problem is that I was running my computer MHZ with MHZ Bus speed this is the original setting I decided to update the BIOS to a newer version So I downlaoded and follow the instructions to update to the TUV X BIOS - I followed as said and was succesful with Flashing my Bios but now I cannot run my computer at mhz with mhz bus as I did before or it will hang and sit there at a black screen until I restart and it brings me back to the BIOS I put default bios and tried again still hang so I lowered it to mhz with mhz bus hang again the only way I can get back into my operating system is if I put the computer set to MHZ with a MHZ bus speed Any other option will make my computer hang with these BIOS so I used another computer to download and install the older BIOS version succesful but still the same hang problem if I set my computer to What can I do to solve this problem I can t even overclock my mhz computer back to a mhz so as of now I am clueless Any help is appreciated message me at email protected if you can help nbsp

Relevancy 48.16%

Asus K8V AMD Athlon 64
Seagate 200GB HD
2 - 512mb PC3200DDR
400 watt ATX Power Supplly
Windows XP

I tried to update the bios using ASUS EZ Flash update, followed user manual to download update to floppy, it read floppy, started erasing, and then failed to flash, then it did nothing. I tried to recover the bios using crashfree bios 2, i inserted my motherboard cd nothing happens, my monitor has no power from motherboard, screen is black. Can anyone help me i am a newbie, probably should not have done this.
 

A:Asus K8V Motherboard Dead

Hello and welcome to Techspot.

As far as I am aware there are only two possible solutions to your problem.

1 Ask the manufacturer of your mobo if they would be willing to supply you with a new bios chip.

2 Get a new mobo.

I`m sorry that I can`t give you any good news but there it is.

Regards and good luck Howard
 

http://www.techspot.com/community/topics/asus-k8v-motherboard-dead.17284/
Relevancy 48.16%

Hi
I am trying to find a manual covering this Mobo.
Can anyone help please.
regards
phil
 

Relevancy 48.16%

The above is what I have. I now have the monitor hooked up to my graphics card. I thought I would engage integrated graphics and see if that was better. I have been through the bios several times and do not see an option to engage. If any of you have this motherboard, please guide me to the correct area. Thanks,

A:Asus P8Z68-V LX Motherboard

Did you check under system agent

Pg 2-19 in the manual. Use Initiate Graphics Adaptor for the selection. You will want to shut it down after saving and switch the cable to the iGPU port.

http://www.sevenforums.com/hardware-devices/249426-asus-p8z68-v-lx-motherboard.html
Relevancy 48.16%

hello there with my new mother boardeverything is good. The green light on the MoBo lights up and all. But when i push the power button, nothing. SOMETIMES it turn on, but it doesnt boot into bios, it just spins thefan on my volcano 9. i can stillopen the CD drive and all, but thats it

can anyone help..i read somwere else that about connecting risors? what wo9uld that be exactly...woud that be setting up the power button to turn ont he power onthe computer.???
thains alot
 

A:asus a7v333 motherboard help

You have connected the case power button up? There is a block on the bottom of the motherboard (at the end where the motherboard light is). Here are conectors for the power switch, reset switch IDE on off light and PC speaker. Make sure they are connected to by the various devices and the cables from your case.
 

https://forums.techguy.org/threads/asus-a7v333-motherboard-help.194640/
Relevancy 48.16%

I just got a Asus K8V SE Deluxe motherboard that I'm using with the recommended Kingmax 512 MB memory and an Athlon 64+ 3000+ processor. I can start it up if I reset the CMOS, but after that and adjusting settings in the BIOS it just goes black screen and shuts off shortly afterwards.

It says something about the VCore voltage being wrong. I really have no clue what I'm doing and am looking for the appropriate settings for the BIOS on this computer. Any help would be appreciated.

- Jeff
 

A:ASUS K8V Motherboard Problems

Really simple. When you're in BIOS, highligh "Load defaults...", press Enter. Save & exit.
 

http://www.techspot.com/community/topics/asus-k8v-motherboard-problems.18656/
Relevancy 48.16%

my friend has just bought an asus m2v motherboard and gf 7300 gs graphics card.

problem is it wont boot with his card in , it will boot with my 7600 gt card ,
ive put his card in my system and it boots fine.

so there seems to be a problem between the m2v and 7300 gs anyone help ?

thanks teeva
 

Relevancy 48.16%

Hi guysI have fresh installed windows 7 Ultimate 64 bit on my pc which now also have a Ssd hdd being the vertex 2-128 g and the asus p5pkl motherboard
Although I have tried, I could not find the achi setting in the bios so continued with the installation. Afterwards I could see that trim was enabled (by following the command promp)
I'm stil unable to trace the setting and searched the web, but cannot get an answer if achi is indeed enabled and working on my system
Hope someone here can help me with an answer?

A:Ssd hdd with asus p5pkl-am pe motherboard

It seems like you misspelled the motherboard. It's a p5kpl correct? There are many versions of that motherboard. Is it just a regular p5kpl?

http://www.sevenforums.com/hardware-devices/237279-ssd-hdd-asus-p5pkl-am-pe-motherboard.html
Relevancy 48.16%

I am looking at motherboards to build a new desktop system. I am looking at the
Asus P5QC Motherboard on ebay to check out the price range. I have noticed that
some sellers have some good combo deals on with these boards. Usually their
deals come with Windows 7 and Quad core processors. It is something to
look at but maybe there is an alternative.
Maybe I should look at alternative boards. Is there any other good mother boards
that I should look at? Is there any other venders I should look at for the best
deals?
I am looking for an good dependable, somewhat up to date board but not
the latest and greatest.

Thank you,
 

Relevancy 48.16%

i was gonna upgrade my motherboard, and this mobo seems to be able to run up to a 3200+ with 8x agp, its only AU$91 @ gamedude computers, has any1 bought one of these mobos before and had problems, i want to know all i can about them before i buy one
 

Relevancy 48.16%

Hai,

I am using Asus B85M-G motherboard. please tell me the settings tutorial step by step.
Before i am intel user. this is the first time i purchase asus board. so i want to know about settings.

Thanks & Regards
Bala.

A:Asus motherboard b85m-g

I don't know exactly what settings you are referring to, but ASUS has one thing that is different than all other brands. If you need to get into Safe Mode. Most brands are F8, but with ASUS you need to boot and hit F5 and it brings you to a menu and then you hit F8 which goes to Safe Mode. You need to remember that because it is very hard to find on Google or other Search Engines.

http://www.sevenforums.com/hardware-devices/391896-asus-motherboard-b85m-g.html
Relevancy 48.16%

Buying a new motherboard from Asus might be a gamble at least with the P P D-E model Asus website list the motherboards' features at their web site ASUSTeK Computer Inc Here are some of the features Marvell SATA Gb s controller - x SATA Gb s ports gray NEC USB controller - x USB ports blue at back panel Expansion Slots - x PCIe x single at x On the surface it does sound good but once the board is fired up the above selected features are either on or off depending on the settings This is selectable deep in the BIOS under the quot IO Levelup quot function that have the following options Disabled USB SATA G motherboard... Asus P7P55D-E There's no USB and SATA G option and this is how each options work Disabled PCIe slot- x USB ports reduced to USB speed SATA G or SATA reduced to SATA USB PCIe slot- reduced to x USB ports are USB SATA G or SATA reduced to SATA SATA G PCIe slot- reduced to x USB reduced to USB speed SATA G or SATA is SATA Here's an image of the PCIe bus speed when the SATA G option has been selected iolevelup Asus jpg Isn't that lovely do I want x PCIe video card or speed up the Asus P7P55D-E motherboard... new SATA SSD drive While I am aware that I should've researched this motherboard more than I've done however it is also a false advertisement that Asus does at their website Just to put it mildly I am Asus P7P55D-E motherboard... also aware that there isn't much I can do at this point other than raise the issue of this type of marketing And just maybe some people reading this can learn from it

A:Asus P7P55D-E motherboard...

I had an Asus board several years ago that I had similar issues with. I never did like the board. However, it turned out to be a killer gaming board, which made my son very happy since he ended up with it.

Hard to say whether I'd want another one or not.

http://www.sevenforums.com/hardware-devices/133911-asus-p7p55d-e-motherboard.html
Relevancy 48.16%

I have the above motherboard. I have been using a video card which is three years old and thought I would try out the integrated video before my video card died. I switched it in the Bios and switched the monitor cable and it started fine on integrated video. The only thing is that the first screen where I can enter Bios does not show, so I am unable to enter the Bios. I tried hitting the delete button on the blank screen but nothing happens. I was able to shut down the PC and switch back to the video card, so I am OK. Does anyone have any idea why the first screen doesn't show on integrated? Thanks,

A:Asus P8Z68-V LX Motherboard

Did you remove the video card?

http://www.sevenforums.com/hardware-devices/268241-asus-p8z68-v-lx-motherboard.html
Relevancy 48.16%

I was really bored the other night, started looking at Asus' Z77 offerings (again), and realized what a hassle it was to click on all those web pages to compare specs and features, seeing as they currently sell 17 different Z77 sku's, so I came up with this quick reference guide.
https://www.box.com/s/541f8a663a90ca20d356
Any mistakes or typos are entirely the fault of the author.
 

http://www.techspot.com/community/topics/asus-z77-motherboard-selector.182507/
Relevancy 48.16%

Anyone know the fastest cpu this motherboard can handle?
 

A:sp97-v asus motherboard

Here's what Asus says about it:

Processor
Intel Socket 7 ZIF Socket for CPU
Intel Pentium Processor 75/90/100/120/133/150/166/200/233 MHz (P55C/P54C/P54CS)
AMD-K6 -PR166-233MHz
AMD-K5 -PR75-133MHz
IBM/Cyrix 6x86-PR166 ~ 6x86-PR233
IBM/Cyrix 166+

hope that helps
 

https://forums.techguy.org/threads/sp97-v-asus-motherboard.41893/
Relevancy 48.16%

I have this board with an amd ATHLON 11 X3 455 . 8gb ddr3 ram .I thought it was kinda sluggish , so I tried to take advantage of 1 of its features ie. unlock the cores in the CPU . You hold down key 4 on boot up .However it booted up and on completing the boot up it showed that the cores were unlocked(a window came up saying so) a few seconds later and BSOD . I rebooted a couple of timed still the same so I reversed the procedure and is now ok . however I'd like to be able to do what I set out to do . Any advice ?
 

Relevancy 48.16%

My Asus MB (M4A89GTD PRO/USB3) is about 5 years old. I have successfully upgraded from Win 7 Pro to Win 10. However, running on Win 10 my PC frequently locks up and has to be re-booted. As a result I down-graded to Win 7 and now all is ok. ASUS does not include this board in the list of Win 10 compatible boards but they state that it might achieve compatibility in the future.
I would like to avoid purchasing a new board and removing/replacing my existing board. If there is no way to make my existing board work with Win 10 could you suggest a good replacement AMD board - I am not a gamer.
Any one got a good suggestion.

A:ASUS Motherboard compatibility

Next time you upgrade to Windows 10, try also updating the chipset and graphics drivers directly from AMD. This should fix the freezing problems.

http://www.tenforums.com/drivers-hardware/26344-asus-motherboard-compatibility.html
Relevancy 48.16%

ok when i power up the mobo i don't get any video, no keyboard response when i hold down the power to shut it off it doesn't, I changed ram, processor, pulled out battery, tried new PSU, different monitor, removed graphic card, tried new graphic card.......i don't know what else to do need some help??? any suggestions ????
 

Relevancy 48.16%

I just want to know if my motherboard will support PCI-E video cards. I currently have an Nvidia 7800GS so I know it supports AGP X8, but I want know so that I'll know if I have to buy a new motherboard when I buy a new video card.
 

A:ASUS P4SD-VL motherboard

if the motherboard has AGP ... then it doesnīt have PCI-E ...
AGP is being replaced by PCI-E .......

cheers
 

http://www.techspot.com/community/topics/asus-p4sd-vl-motherboard.50262/
Relevancy 48.16%

Hey, I'm pretty much clueless when it comes to compatibility, so I was wondering about a few things. First of all, I'm planning on buying an Asus - SK8N - nVIDIA nForce3 Socket 940 ATX Motherboard (http://usa.asus.com/products/mb/socket940/sk8n/overview.htm). I'm also planning on buying a new processor, memory, video card, and hard drive. Basically, I'm wondering if this motherboard will support two hard drives in a RAID 0 configuration, an Athlon 64 FX processor, and an ATI X800 XT graphics card. The 'board has an nVidia chipset, so does this mean that only nVidia graphics cards can be used? Like I said, I'm clueless..
 

Relevancy 48.16%

Just got an ASUS P S motherboard P4S800 Motherboard ASUS and was getting ready to install XP pro and it would not recognize my CDROM Drive or the DVD Drive They were both on the secondary IDE channel I ASUS P4S800 Motherboard hooked them up to the primary IDE and there they were Did a little research and found if I disconnected the USB cable to the ASUS P4S800 Motherboard front of my ASUS P4S800 Motherboard case the Secondary IDE worked just fine Well I have been trying to find out if there is some kind of fix for this problem I haven t found one yet I am really dissappointed as I have been told that ASUS was a good product I mainly have used Gigabyte in the past Well if any one has found a solution to this problem please let me know Oh yea I called ASUS technical support and after minutes they told me that they would have to call me back and it would be less than an hour Well that was hours ago and they have two phone numbers so I m not sure what the problem is suspiciou DUMPY nbsp

A:ASUS P4S800 Motherboard

Welcome to Techspot!
When you made the connection for the front USB on the MB did you try to reverse the + /- data connectors , I had this problem on an Abit .
 

http://www.techspot.com/community/topics/asus-p4s800-motherboard.16544/
Relevancy 48.16%

So it s time to overhaul my comp Ghz processor Asus motherboard SDRAM Today at Fry s I will buy a new processor motherboard DDR RAM and a new ATI graphics card These new parts as well as my old comp will then travel to a professional for assembly Asus P K-E WiFi-AP motherboard motherboard Asus P5K-E WiFi-AP / http www hardwaresecrets com article Intel Core Quad Q Bx processor TWIN X - C DHX DDR Ram Because I am hardware illiterate my question is simply Is this a solid base for a new Asus P5K-E / WiFi-AP motherboard computer When I bring these parts to the professional will he have any problems assembling these three components I don t want to have him tell me that I must make another trip to Fry s to buy the right parts Is Dual Core Asus P5K-E / WiFi-AP motherboard better for this motherboard instead of Quad Core As for the accessories mouse modem sound card drives please ignore them for now Finally I understand that I must also buy a powerbox with some kind of rails for my new PCI-Express graphics card nbsp

A:Asus P5K-E / WiFi-AP motherboard

Solid base: Yes. That is a very nice motherboard.

Trouble with assembly: No. Everything you've chosen so far is 100% compatible.

Dual-core better: Not necessarily. There aren't many applications that take advantage of all 4 cores, so if you can find a better price on a dual-core, you might want to consider it. Otherwise the quad-core is a good choice.

Powerbox: The item you're referring to is called a power supply, or PSU for short. The 'rails' refer to the amount of power capable of being distributed at each voltage type used by the computer.

Here's a good example of a nice PSU at a respectable price that is more than powerful enough for most needs:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817371015
 

https://forums.techguy.org/threads/asus-p5k-e-wifi-ap-motherboard.690624/
Relevancy 48.16%

Recently I upgraded to an ASUS A7V MB with an Athlon 850 chip. I selected "Jumper free" settings, and recently on bootup I have been getting a message sending me to the BIOS saying that my CPU Frequency settings are wrong. It has been set to "USer Define," CPU frequency 100 (It gives the option of setting it as high as 133, but I leave it at 100), and DRAM Freqency 133 (I have 256 MB of PC133).
The motherboard tech people only (wearily) say that this board "often does that." But it does it about every 3d or 4th boot.
I don't understand the multipliers, etc. Should the settings be changed? (I would have to change a jumper to "Jumper mode" to make any further changes.)
Thanks.
 

Relevancy 48.16%

Need to know the multiplier specifics when installing this cpu onto this motherboard.

Cpu Frequency
Memory and bus frequencies
Thnx.
 

Relevancy 48.16%

Hey guys I'm new here and I've been having a lot of trouble with my ASUS M A TD-V EVO motherboard It's rated to be compatible with Gbs of RAM but the last two sets I've purchased from newegg haven't worked at all I tried mixing old RAM with new and it still won't work It only works if I use my old RAM RAM that works Crucial GB x GB -Pin DDR SDRAM DDR PC First attempt at GBs G SKILL Ripjaws Series GB x GB -Pin DDR SDRAM DDR PC Second attempt Kingston GB x GB -Pin DDR SDRAM DDR PC Only the original Crucial memory works When i tried the other two nothing would show on the screen Any help here would be awesome and much appreciated EDIT I tried GBs RAM on working 16 motherboard not ASUS of googling for help and found a forum post on here already on the same subject when my first attempt didn't work That's what pointed me to buy the Kingston RAM It was recommended by a user here and it still didn't work EDIT Problem has been solved I had to update the BIOS of the motherboard to fix the problem

A:16 GBs of RAM not working on ASUS motherboard

Hello Randomrocket. Welcome to the forum.

I assume you have already checked to be sure all RAM you are trying to use is the same specs as the current RAM, most importantly the voltage spec, but also unbuffered, and the timings should be the same or very close.

That said, the first thing you need to determine is whether it is a bad stick of RAM or a bad RAM socket or a power problem.

The first thing to do is remove the old working RAM and add one stick of new RAM into the first blue slot (A1) and test. Test each new stick in A1.

If that works then install the 2 new sticks in the same locations as the old sticks (the 2 blue slots - A1&B1) and test.

Then, with the two new sticks still in A1 & B1, add one stick of the old RAM into the third slot (black - A2) and test. Then the second old stick in the last slot (black - B2).

Report back what you find.

http://www.sevenforums.com/hardware-devices/198038-16-gbs-ram-not-working-asus-motherboard.html
Relevancy 48.16%

ok i have a asus p2b 440bx motherboard with p 2 at 266mhz
i just bought a intel celeron 800mhz processor
when i installed it it made this ticking sound and comp wouldnt start...
please help me
 

Relevancy 48.16%

I put together a new system with an Asus Z87-c Core i5 processor and new DDR3 memory. I used the hard drives and DVD drive from an old system (motherboard had died on that computer). The C drive has XP installed and was working fine in that old system.
As soon as xp starts to load I get a bsod with the following:
Stop : 0x0000007e ( 0xc0000005, 0xf75fe0bf , 0xf789e208 , 0xf789df08 )
pci.sys - address F75FE0BF base at F75F7000, Datestamp 3b7d855c

I get the same result if I try to reinstall XP from the CD

Other forums seem to say this must be a hardware problem, BUT I can load and run a version of linux perfectly ok.

I need Windows to use mapping software I use, I'm thinking I should get Win 7 to replace the old XP, do you think that will load and work ok?

Thanks!
 

A:XP won't load on new Asus Z87-c motherboard

I can tell you that if you take a hard drive out of one computer with Windows on it and then try to put that into a different computer, it will not work.

I found this thread here: http://answers.microsoft.com/en-us/...f78da208/08bac46d-55b5-472b-8bad-c0dc227359a8

Based on the error code, it seems that there could be a problem with the RAM. Step number 4 in the answer provides a link to Memtest to download and run on the computer. You should have a built in Memory test that you can access at boot from the advanced boot options screen. You will have to use an f key to get there. The f key differs, so you will have to try them and find out which one it is.

If it is a problem with the RAM, take it out and then put it back in, making sure it is fully seated.
 

https://forums.techguy.org/threads/xp-wont-load-on-new-asus-z87-c-motherboard.1112132/
Relevancy 48.16%

hey
i was thinking of upgrading my gf2 mx400 64mb to a geforce mx4000 128mb, however i dont no how to see if it will work on my motherboard,

http://au.asus.com/products/mb/socket478/p4sgx-mx/overview.htm#
(my mother board)

http://www.directron.com/aslmx4000.html
(the graphics card)

thanks
 

A:mx4000 on asus Motherboard?

Your mobo has an AGPx4 slot and will accomodate that new card without any problems.
That card is AGPx8/x4/x2 compatible, so no problems.
Check if there is a jumper on the mobo, or a setting in the BIOS, to switch off the onboard graphics. Some mobos switch it off automatically when you insert an AGP card.
Before you put the card in, uninstall the current graphics drivers and load the most basic, windows-own VGA drivers. Then switch off and do the swap.
 

http://www.techspot.com/community/topics/mx4000-on-asus-motherboard.23496/
Relevancy 48.16%

Does it support dual-channel ram?
 

A:Asus A8n-sli Deluxe Motherboard

Yes it does. You can go here: http://usa.asus.com/products/mb/socket939/a8nsli-d/overview.htm# and check out their Memory QVL
 

http://www.techspot.com/community/topics/asus-a8n-sli-deluxe-motherboard.23020/
Relevancy 48.16%

Hey everyone,
I need to determine what my motherboard is ASAP. I'll give you everything I know about it, but I've been searching the web and haven't been able to find anything...

ASUS Brand, it came in a HP Pavilion
Pentium 4 (Not sure what slot)
4 DDR RAM Slots
1 PCI-E x16 Slot
3 PCI Slots
Orange/Yellow in colour.
RAM Slots are Blue, Red, Blue, Red

The reason I need to know is I have no idea how to configure my System Panel Connectors, as I am trying to fit the board into a new case.

Thank you in advance for your help,
Skutty.
 

A:Need to determine my ASUS motherboard

when did u buy it?
actually heres a better way of finding out..
http://www.majorgeeks.com/download4181.html

download the little tool and u can find out a whole bunch about ur system.. mobo type, cpu type, ram, temperatures, etc...
 

http://www.techspot.com/community/topics/need-to-determine-my-asus-motherboard.40007/
Relevancy 48.16%

Quick question... hope somebody can help:

I'm running an Asus P2Bf motherboard in my PC. When I built the machine, I installed a Celeron 400 chip. I'd like to upgrade but I need some advice on what to upgrade to. Asus hints that any compatible PIII chip will work. Any body out there have experience with this board--care to offer an opinion?

Thanks mucho,
Mark Simpson
 

A:Asus P2bf motherboard

Depends on which board revision you have, I would look at the board and find the revision number and email asus
[email protected]

You will need a bios flash to get the latest supported processors.

Asus state p3 support for coppermine depending on board and bios revision.
 

https://forums.techguy.org/threads/asus-p2bf-motherboard.64488/
Relevancy 48.16%

Hi

According to this link my old Asus P5K-E Wifi Delux board should be compatible:

Windows 8 compatibility for ASUS P5K Deluxe/WiFi-AP AiLifestyle Series ATX - iP35 Motherboard model P5K DELUXE WIFI-AP
However the Asus download site for this board does not list Win 8 as compatible OS - only up to Win 7.

I am thinking of upgrading but don't want to rebuild my PC to do this.

Can someone advise ?
Thanks

A:Win 8 compatibility with my old Asus motherboard ?

Technically-speaking, 8 or 8.1 will work well for you. If you have any problems whatsoever with the setup, we here at the forums can advise well.

I've troubleshot that motherboard more times that the internet can count. Don't take that as a negative; there is no design flaw or defect.

http://www.eightforums.com/general-support/39118-win-8-compatibility-my-old-asus-motherboard.html
Relevancy 48.16%

I just bought an ASUS M2N-E SLI motherboard to go into an ultra gladiator case.When I turn the motherboard over I notice a bracket on the back side.Will this bracket interfier with the mounting and does it matter if it touches the inside of the case where it mounts to because it looks awfully close.the case is an ultra gladiator mid tower atx case