Windows Support Forum

Can't access websites but can update

Q: Can't access websites but can update

Hi,

I just launched up my PC (W7) and there is a red cross on the bottom right where the network connection is.

Everytime I launch IE it freezes everytime I launch up firefox it just doesnt load up although I can connect to Skype fine and update software.

This is really werid, sounds like a viruses blocking internet browser and displaying a cross because I have internet as I just updated my software.

Virus and spyware scan came up clean

Any ideas,

Thanks

Relevancy 100%
Preferred Solution: Can't access websites but can update

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Can't access websites but can update

TheCase said:






Everytime I launch IE it freezes
everytime I launch up firefox it just doesnt load up
although I can connect to Skype fine and update software.
Click to expand...

1+2 are real issues that *can* impact you regardless of the network settings, so you may go thru a lot of work and still have issues left over :sigh:

What has changed? Did you install hardware/software or tweek some settings?

http://www.techspot.com/community/topics/cant-access-websites-but-can-update.155324/
Relevancy 18.06%

Hello, I'll try to be as clear as I can.

I have my computer hooked up to my router with an Ethernet cable. About an hour ago the Limited sign popped up. With the cable connected it says Limited, but I can freely use the internet. When I take the cable out, under connections it still only says "Ethernet Limited" and I can't use the internet. I'm not sure about any specs to my comp. All I know Is I'm using windows 8 and it's from Toshiba. I know it's not much to go on, but I'm losing my mind and any help would be wonderful. Thank you.

This picture is how it looks when the cable is, and isn't, plugged in.

 

A:Limited Access with Ethernet, even when not connected

With the cable pulled out, the picture is correct (for a wired Lan Connection).
When it is attached AND you have access to the Internet, it should not be limited.
SO, get a command prompt ( start->run and enter CMD ) and enter

IPCONFIG /ALL >myTCP.txt
then NOTEPAD myTCP.txt
copy the contents and PASTE that as your follow-up
 

http://www.techspot.com/community/topics/limited-access-with-ethernet-even-when-not-connected.217393/
Relevancy 17.2%

AMD has launched their first WQHL-certified Catalyst graphics card driver update since December 2014, bringing a heap of new features and performance updates across the board, as well as the usual array of bug fixes.

Read more
 

A:AMD launches major GPU driver update: Catalyst 15.7 WHQL

I have played with the CFX and Freesync support on the Acer 1440p 144hz monitor. Works great and makes me want to actually own a Freesync monitor now...
 

http://www.techspot.com/community/topics/amd-launches-major-gpu-driver-update-catalyst-15-7-whql.216359/
Relevancy 25.8%

So about a few weeks ago (not exactly sure when it started) my computer stopped allowing me to access certain websites. It started out with only a few, but now it is almost 50-80% not connecting. I do not think it is a problem with my browser. I typically use Firefox, but IE will connect to the same ones Firefox allows, and will also not connect to the same websites Firefox will not allow.

I have searched these forums for a couple of hours now and nothing seems to fit my exact problem, and I am hesitant to use the solutions from other forums because it might further hurt my system. I am not tech-savvy/computer literate to say the least, and I would need a thorough walk-through on how to diagnose the problem, as well as how to fix it.

Any help would be greatly appreciated.
Thanks
 

A:Unable to connect to most websites -- not a browser problem

How are you not allowed to view the website? Does the page show "The page cannot be displayed"? or you are not authorized or something else?

Try running cmd.exe, type "ipconfig /flushdns" without quotes.
 

http://www.techspot.com/community/topics/unable-to-connect-to-most-websites-not-a-browser-problem.177710/
Relevancy 17.2%

I have a Razer BlackWidow keyboard Recently I downloaded and installed the latest version of Razer s Synapse on update keys swapped firmware Razer BlackWidow to try and fix this issue I was having with my Naga Lo and behold my Naga issues Razer firmware update swapped keys on BlackWidow were fixed but another problem emerged The new version of Synapse added support for the BlackWidow and also upgraded the firmware But after the upgrade my Windows and Alt keys have been swapped so when Razer firmware update swapped keys on BlackWidow I press one I get the other The only way I ve been able to fix it so far is to use SharpKeys to switch the keys back around but when I connect another keyboard that keyboard now has its Windows and Alt keys swapped It s not that big Razer firmware update swapped keys on BlackWidow of a deal but I do swap to a quieter keyboard late at night from time-to-time and I would really prefer to have it fixed without having to rely on a workaround like this I ve check around and I can t find any information about this issue and Razer s support website is completely useless as usual Likewise I haven t had any luck so far with downgrading the firmware either Does anybody have any idea on what I could do particularly other BlackWidow owners nbsp

A:Razer firmware update swapped keys on BlackWidow

Can't you just go into Synapse and assign the Windows key to the Alt key and vice versa? All the keys are programmable and hopefully this wouldn't affect your other keyboard.
 

http://www.techspot.com/community/topics/razer-firmware-update-swapped-keys-on-blackwidow.182990/
Relevancy 17.2%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 17.63%

The impending launch of DirectX 12 is one of the more exciting things to happen in PC gaming in recent years. Many people are eager to see how the low level API will improve the performance of games that implement...

Read more
 

A:You can now test DirectX 12 yourself with latest 3DMark update

This is way windows is doomed. DirectX 12 should be available for win 7-10, but MS is so greedy, they cant seem to understand why they are disliked and windows will evientaly be destroyed by Google. Just look at there market share. I betting big on SteamOS, and once it takes off, I will take the jump. Windows is now to bloated, and with greed, I hope all backers back Vulkan. DX12 on Win 10 only has officially broke the camel back.
 

http://www.techspot.com/community/topics/you-can-now-test-directx-12-yourself-with-latest-3dmark-update.210768/
Relevancy 17.2%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 17.63%

Toshiba laptop. Internet at the bottom right says there is a connection available, but says the settings saved on this computer for the network do not match the requirements of the network. It has to be plugged in to the modem to access Internet. Speakers do not work. Ports do not work either. I had it in for repair and he thought it might be the motherboard, but he couldn't fix the other one and I got help with Broni on here and it works fine now. I am hoping someone on here can help me fix this one. It has no viruses; it's clean. Thanks!
 

A:Laptop cannot access the Internet unless it is hooked to the modem

Ok, the modem=>pc config working says networking is at least sane.

To get the modem=>router=>pc to work, the pc should not have ANY configuration data stored in the network adapter settings. Can you find and clear the network adapter for yourself?
 

http://www.techspot.com/community/topics/laptop-cannot-access-the-internet-unless-it-is-hooked-to-the-modem.207405/
Relevancy 17.63%

Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.

Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.

Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.

"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.

How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!
 

A:Can't connect to wifi after hardware driver update

Call your ISP they will walk you through it.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-after-hardware-driver-update.206983/
Relevancy 17.63%

Hi there guys

I suddenly can't connect to wifi, but the problem is solved when I use the cable, and connect my laptop directly to modem. surprisingly I checked and it seems I can connect with my tablet to wifi spot! I used recovery and system restore point, but it didn't help.

I really appreciate your help.

oh and yes in wireless mode, I can see different wifis, but when I click to connect, it tries "connecting" but fails as well.
 

A:Investigate router, access point issues

Do you use MS Update in Autoupdate? looking to see if you are 'current'.

get make/model of your WiFI device (see device mgr),
find the version of the existing driver, then
see if you can find a newer version; install it if found.
 

http://www.techspot.com/community/topics/investigate-router-access-point-issues.207216/
Relevancy 17.63%

Well I am accessing my remote router via and it works access work via phone, Remote PC doesnt via ok when I am using my Phone s Remote access ok via phone, doesnt work via PC browser chrome or IE on Samsung however when I am at computer at work I cant access my router I ran Tracert and I am getting up to hoops and th says quot Request timed out quot lt ms lt ms ms lt ms lt ms lt ms lt ms lt ms lt ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms Remote access ok via phone, doesnt work via PC ms ms ms border ge - unitedair- chg pnap net ms ms ms core te - -bbnet chg pnap net ms ms ms ae - chi ip gtt net ms ms ms xe- - - chi ip gtt net ms ms ms c-eth- - - -pe ecermak il ibone comcast ms ms ms he- - - - -cr ecermak il ibone comcast ms ms ms ms ms ms te- - - - -sur mortongrove il chicago com net ms ms ms te- - -cdn mortongrove il chicago comcas t Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Trace complete Anyone would know why it works on the phone and doesnt really go through all the way to the end nbsp

A:Remote access ok via phone, doesnt work via PC

Ok I have to ask first when you are using your phone is it always using mobile data or do you connect it at work via wifi? When reason that makes sense to me is at your work they maybe blocking the remote port. I guess it all depends on what you are using also. If you are just using standard RDP then they might be blocking port 3389. If you could give further information on how you are connecting remotely whether using software such as teamviewer or just standard RDP. Also how do you have your router configured. I can better understand witht is information thanks....
 

http://www.techspot.com/community/topics/remote-access-ok-via-phone-doesnt-work-via-pc.206550/
Relevancy 18.06%

So I have a very strange issue with my laptop.
It's a Toshiba a665-06f
I7 [email protected]
8gb ram
500gb Samsung ssd
Running Windows 8.1 pro

I can't get into the bios it boots in less than 10 secs, I've even tryed removing the hdd to get it to boot to the bios but it just sits at a blank screen when I do that. I've tryed tapping the all the f keys the del and esc on start cant get into the bios or even the boot options. Other than not booting into the bois it works great.
Any ideas please?
 

A:Unable to access bios

"Other than not booting into the bios, it works great"... So this means you can boot into Windows normally, and use the laptop?
 

http://www.techspot.com/community/topics/unable-to-access-bios.206928/
Relevancy 18.06%

Hello all,
Most of memories, RAM, ROM, HDD, DVD-RAM and others are
random access. What are some non random access memories please?
 

http://www.techspot.com/community/topics/non-random-access-memory.206101/
Relevancy 18.06%

Hello there,
I have seen that you are knowledgeable regarding pc, and have also seen tht you resolved successfully several threads.

I have a laptop and up to yesterday I could connect to the internet through wifi and cable. But today I cannot.

Here you can see my wifi.txt : https://www.dropbox.com/s/27g7g6xzqb8al1e/myWifi.txt?dl=0
and here my wired: https://www.dropbox.com/s/o5nwfr6nwafoj1a/myWired.txt?dl=0
I uninstalled bitdefender to no avail.
Yesterday I was experimenting with this software: hotspot shield, bot revolt, ghostsurf. I uninstalled it yesterday and internet was working fine after that. I am just mentioning it.
I have win 8.1
I dont have any red in device mgr.

I am looking forward to your answer.
I hope you can help me
Kind regards
nisidotatos
 

A:Connected to internet, but no access

I'm posting a Win/8 solution solved in a private conversation. After proving that TCP could PING and use NSLOOKUP, it is time to suspect browser settings - - here's the solution:




jobeard said:



IE(9) -> Internet Options
General Tab
set homepage too www.google.com/

Security Tab
[x] enable protected mode

Connections Tab
at the bottom click Lan settings button
[x] Automatic detect settings SHOULD BE ON
[ ] auto script OFF
[ ] use a proxy OFF

Advanced Tab
[x] software rendering instead of GPU
Browsing
[x] disable script debugging (there's 2 of these)
HTTP 1.1
[x] both boxes
International
[x] send IDN names
[x] send UTF-8
Security
[x] check publisher revocation
[x] check certificate
[x] check signatures on downloads
[x] enable Windows Authentication
[x] enable memory protection
[x] use SSL 3.0
[x] use TLS 1.0
[x] use TLS 1.1
[x] use TSL 1.2
[x] warn certificate address mismatch
[x] warn if postClick to expand...





nisidotatos said:



It worked.
it was a problem here:
Connections Tab
at the bottom click Lan settings button
[x] Automatic detect settings SHOULD BE ON
[ ] auto script OFF
[ ] use a proxy OFF

the auto was off, and also a vpn required was on, which I deactivated.
It is working now.
This is great.
I thank you so much.
If you ever come to Greece, give me a call!!!Click to expand...


 

http://www.techspot.com/community/topics/connected-to-internet-but-no-access.205805/
Relevancy 17.63%

Okay next Monday (July 21st) I go in for a hernia operation, I am going to be laid up for awhile and thankfully I have a laptop I can use while recovering upstairs in my bedroom. I can access my Netgear router but the signal is not that strong (bedroom and downstairs office are on opposite corners).

So I have been pondering getting either an Access Point or a Extender for the upstairs but there are so many to choose from I am not sure what to choose nor what brand because the reviews are strongly mixed regardless of who the manufacturer is.

My Needs:
1. Both 2.4 GHz and 5.0 GHz. I've looked at this one but I am not sure: http://www.amazon.com/gp/product/B0...pf_rd_t=101&pf_rd_p=1688200382&pf_rd_i=507846

2. Something simple to set-up.

3. It must work with WPA security. The above one I linked to, after firther research does not do well with WPA.
 

A:Access Point or Extender for Upstairs Wireless?

Really NEED 5ghz? dual band systems seem to impact the reliability AND the distance reached.
You could lock it down to use only 2.4Ghz and improve the reliability.

I solved my distance issue using an EoP device and then any WiFi router at the remote end.
That's TWO purchases; The EoP master/slave pair to get wired access into the remote location and then the WiFi router itself. I've always been partial to Netgear and bought their EoP.
 

http://www.techspot.com/community/topics/access-point-or-extender-for-upstairs-wireless.203893/
Relevancy 18.06%

CPU:AMD FX-8320
Motherboard:ASUS M5A97 R2.0
OS:Windows 8.1 64-bit

I hardly know anything about the BIOS so I am asking you this:
Will I need to update my BIOS and if so how to do that?
Am I going to update it to the latest version(2103) or the version when the processor was first compatible(1006)?

Please help, I do not want to make a mistake when updating so please provide a detailed explanation ! ! !
 

A:BIOS update

Some might say updating the BIOS is not worth the risk unless you have a reason to chance it. On the other hand I've never had a BIOS update go badly. BIOS updates are not that difficult to do. But there is always a risk of the update failing. In the off chance of failure, the motherboard will be bricked. There are motherboards that come with a second BIOS for failsafe. I don't know if the failsafe can be used under a bricked board, I will assume it can until I hear otherwise.

There are three ways to update that I am aware of. All of which may not be available depending on motherboard model and age of system.

Within the Operating System (I've used this method but for awhile it was advised against)
You will need to download BIOS Update application. The application will download and install the new BIOS.

Within the BIOS
Within the BIOS there is an update facility. You will only need the new BIOS. (My BIOS will only update from a USB stick.)

From DOS utility
Not only will you need to download the new BIOS, you will need to download the flash utility that is designed for the update.

I recommend updating from within the BIOS (assuming you have this option). Download the new BIOS to a USB stick and then boot into the BIOS. Browse around to find the update facility and the rest is self explanatory.
 

http://www.techspot.com/community/topics/bios-update.198931/
Relevancy 18.06%

Someone help me please cannot access but can cable LAN wifi internet My It s urgent Windows IP Configuration Host Name kent-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description My wifi cannot access internet but LAN cable can Atheros AR PCI-E Gigabit Ethernet Controller NDIS Physical Address - -A -AF- - E DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Atheros AR WB- NG Wireless Network Adapter Physical Address - -CA- - - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe a e b ec Preferred IPv Address Preferred Subnet Mask Lease Obtained June Lease Expires June Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -D - C- - - -CA- - - DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter isatap CB C E- EC - E - CD- BE B CDC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap AA FDD -F C - BD - D -CEDB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My wifi cannot access internet but LAN cable can

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-cannot-access-internet-but-lan-cable-can.203495/
Relevancy 17.63%

Hi there
need to know if I can upgrade my graphics card for upgrade to windows 7.
current graphic card:ati radeon 9200 se 128mb ddr tvo
computer :fujitsu siemens scaleo 600
motherboard :microstar ms-6585 2.oa
power supply:dc output 250w
thanks so much.
learner1
 

A:Graphics card update to host windows 7

I don't know if you CAN upgrade your graphics card, but:

You most likely don't NEED to.
It's not really a good idea to upgrade at all. Those parts are old as dirt and you won't find anything cheap that'll fit.

 

http://www.techspot.com/community/topics/graphics-card-update-to-host-windows-7.202568/
Relevancy 26.66%

I was hoping I wouldn t have to post on the forum I hope I chose the right category to post it in for advice but after reading endless threads all over the net I am still left with a problem I can t seem to figure out Basically there are load won't 3 websites websites that I know of that won t load on my laptop at home Google com Facebook com and Amazon com I ve tried to disconnect my WiFi and turn my phone into a hotspot but they still won t load They all work on my phone both on 3 websites won't load the WiFi and the mobile network They also work on other PC s I use Firefox but I have tried Internet Explorer Chrome Safari and Opera and none of them can open these sites A few of the advices I ve read and tried are Replacing http with https Did nothing Flushing by 3 websites won't load opening a command box and writing flushdns I did it correctly and it did not work I have my computer set up with a login password the reason I post this is because I read somewhere that setting a login password might help This is how desperate I am I haven t done a System Restore because the dates offered aren t after this started to happen which is over a month ago I m from Iceland and for some reason google is does work I have a year old Acer with a Windows bit OS Is there anybody out there that has the slightest idea of what is causing this Many thanks in advance nbsp

A:3 websites won't load

Suspect your hosts file is contaminated
get a command prompt

cd \windows\system32\drivers\etc​
look for each domain name in the hosts (should not be present)
(If you see something like 127.0.0.1 ***.google.com, then you can't get to google.com). Here's the test sequence:

find /I "amazon" .\hosts
find /I "facebook" .\hosts
find /I "google" .\hosts​
Here's my content for each (notice while I have some hits, none are the basic domains (eg google.com, facebook.com and amazon.com are all missing. Entries shown stop advers from being displayed)

find /I "amazon" .\hosts
# [Amazon.com]
127.0.0.1 rcm.amazon.com
127.0.0.1 rcm-images.amazon.com
127.0.0.1 alexa-sitestats.s3.amazonaws.com
127.0.0.1 matchbin-assets.s3.amazonaws.com
127.0.0.1 springclick-ads.s3.amazonaws.com
127.0.0.1 adtago.s3.amazonaws.com
127.0.0.1 sync.cmedia.s3.amazonaws.com
127.0.0.1 ecommstats.s3.amazonaws.com
127.0.0.1 exitsplash.s3.amazonaws.com
127.0.0.1 load.s3.amazonaws.com
127.0.0.1 ncads.s3.amazonaws.com
127.0.0.1 tracking.opencandy.com.s3.amazonaws.com
127.0.0.1 viewerstats.docstoc.com.s3.amazonaws.com
127.0.0.1 www.assoc-amazon.com
127.0.0.1 trk.cetrk.com #[s3-1.amazonaws.com]
127.0.0.1 ads.smowtion.com #[s3-1-w.amazonaws.com]
127.0.0.1 s.amazon-adsystem.com​
find /I "facebook" .\hosts
# [Facebook]
127.0.0.1 ads.ak.facebook.com
127.0.0.1 creative.ak.facebook.com
127.0.0.1 facebookinc.122.2o7.net
127.0.0.1 facebook.com.img335.tk
127.0.0.1 www.facebook.com.img335.tk
127.0.0.1 facebook-videos.de
127.0.0.1 www.facebook-videos.de
127.0.0.1 rrstryhf.facebook-videos.de​

find /I "google" .\hosts
# Entries with comments are all searchable via Google. #
127.0.0.1 google.tucows.com
127.0.0.1 mt34.mtree.com #[Google.Diagnostic]
127.0.0.1 refer.ccbill.com #[Tracking.Cookie][Google.Diagnostic]
127.0.0.1 www.toons-for-adult.com #[Google.Warning]
# [Google Inc]
127.0.0.1 domains.googlesyndication.com #[Parking Service]
127.0.0.1 pagead2.googlesyndication.com #[Google AdWords]
127.0.0.1 video-stats.video.google.com
127.0.0.1 ssl.google-analytics.com
127.0.0.1 google-analytics.com
127.0.0.1 www.google-analytics.com #[Google Analytics]
127.0.0.1 4.afs.googleadservices.com
127.0.0.1 pagead2.googleadservices.com
127.0.0.1 partner.googleadservices.com
127.0.0.1 www.googleadservices.com
# [Google / DoubleClick][AS15169][209.85.128.0 - 209.85.255.255]
127.0.0.1 analytics-api-samples.googlecode.com #[Google Analytics social tracki
ng]
# [Google / DoubleClick][AS15169][64.233.160.0 - 64.233.191.255]
127.0.0.1 googleads.g.doubleclick.net #[pagead-dclk.l.google.com]
127.0.0.1 tpc.googlesyndication.com
# [Google / DoubleClick][AS15169][66.249.64.0 - 66.249.95.255]
# [Google / DoubleClick][AS15169][72.14.192.0 - 72.14.255.255]
127.0.0.1 clickserve.us2.dartsearch.net #[www3.l.google.com]
127.0.0.1 googleads2.g.doubleclick.net
# [Google / DoubleClick][AS15169][74.125.0.0 - 74.125.255.255]
# [Google / DoubleClick][AS6432][216.73.80.0 - 216.73.95.255]
127.0.0.1 blueadvertise.com #[Google.Diagnostic][2013-01-02]
127.0.0.1 click.atdmt.com #[McAfee.Cookie-Atdmt][Google.Diagnostic]
127.0.0.1 www.e-googles.com
127.0.0.1 www.adjuggler.com #[Google.Diagnostic]
127.0.0.1 gcounter.cn #[Google.Diagnostic]
127.0.0.1 googlenews.xorg.pl
127.0.0.1 1.googlenews.xorg.pl
127.0.0.1 2.googlenews.xorg.pl
127.0.0.1 3.googlenews.xorg.pl
127.0.0.1 4.googlenews.xorg.pl
127.0.0.1 5.googlenews.xorg.pl
127.0.0.1 www.bgoogle.it
127.0.0.1 bgoogle.it
127.0.0.1 www.fgoogle.it
127.0.0.1 fgoogle.it
127.0.0.1 google.dospop.com
127.0.0.1 www.google.dospop.com
127.0.0.1 google.panet.org
127.0.0.1 google123.web1000.com
127.0.0.1 google3.it
127.0.0.1 www.google3.it
127.0.0.1 www.google4.it
127.0.0.1 google4.it
127.0.0.1 googlebar.jps.ru
127.0.0.1 googlebawt.com
127.0.0.1 www.googlebawt.com
127.0.0.1 googled.it
127.0.0.1 www.googled.it
127.0.0.1 goo... Read more

http://www.techspot.com/community/topics/3-websites-wont-load.201626/
Relevancy 17.63%

Hi been awhile since I last posted. In the house we have a desktop and 2 laptops on the go in the house.The desktop is wired internet while the laptops are run on wifi.This worked fine until my isp UPC upgraded my internet speed from 50mb to 120mb.. The desktop and one of the laptops still works fine but the acus laptop has web access for between 20 mins to 45mins before the wifi drops off and becomes limited access. The wifi needs to be renabled to regain access to the wifi which lasts another small while until it gets limited access again.

The laptop specs are:
Acus K53e
Windows 7 home premium 64bit
intel Centrino N100 wifi adapter
Ram 6gig

At the moment its running for 30 mins then wifi cuts off for a few seconds before starting up again.
 

http://www.techspot.com/community/topics/laptop-gets-limited-access-after-period-of-time.201028/
Relevancy 18.49%

You've all prob solved this problem for a thousand other folks...
I cant access my Ext Hard Drive. It worked fine on my PC first time around. When I took it to my MAC it was read only. I reformatted the EHD so that I would be able to copy files from my MAC. Now I want to transfer some of the data back to my PC but I can no longer access the drive on my PC.

I've read some threads with related issue.
Drive shows up in Devices and Printers.
Drive shows up in Disk Partitions> Create and Format Hard Disk Partitions> but when I right click on the drive, "Change Driver Letter and Paths" option is greyed out.
Drive does not show up when I go to Start>diskpart>run as administrator>list volumes...

I know the data is on the drive and my computer somewhat recognizes the drive. But I cannot access to explore, save to , etc. Please help.
 

A:Can't access my Ext.HD

Try to retrieve the data from the external hard drive with a data recovery software by connecting it to mac and then format the Ext Hard drive before it is connected to your PC.
 

http://www.techspot.com/community/topics/cant-access-my-ext-hd.200498/
Relevancy 17.63%

I have a client that has been asking me about a way to monitor internet activities or to get email addresses for people who use his wifi hotspots He owns a chain of restaurants and essentially wants a system page access? restaurant hotspot for Login that retrieves people s email addresses when they connect so he can send them promotional emails Personally I think this is a terrible idea but professionally I have to give him my opinion I was going to suggest that he have a sign in page that the router directs traffic to before it gives full connectivity to the user Login page for restaurant hotspot access? This page would Login page for restaurant hotspot access? have a user agreement that allows for sending promotional emails I ve seen these at airports and some other businesses and I hate them but this seems to be the least morally objectionable way to do what he s asking rather than implementing a shady web traffic monitoring system I m pretty sure all this would take would be to have the DHCP managed by a server that through the dns sends all traffic to a page that requires registering a login before granting full access to the network Has anyone done something like this themselves or have a suggestion for a method or application that aids in something like this Thanks nbsp

http://www.techspot.com/community/topics/login-page-for-restaurant-hotspot-access.200163/
Relevancy 17.63%

I have no idea why this happened, after the update none of the ports on my computer work after booting into windows. bios was updated before this and all was fine. checked in bios if ports were enabled. still no joy. help!!!
 

http://www.techspot.com/community/topics/all-usb-and-ps-2-ports-dead-after-msi-motherboard-driver-update.200108/
Relevancy 18.06%

HI I read the whole thing but I ve certainly gotten lost in a few parts I believe I have a similar issue I have laptop with windows and it ha dbeen connecting to wifi for almost a year already with no problem all of a sudden for the past few days it started showing the DAMN yellow triangle and its always quot no internet access quot cant surf the web but my iphone and my neighbour who im splitting the bill with are connecting just fine Also when connected to an ethernet cable it works it actually very clearly show the name of my wireless network with the words quot no internet access quot beneath and then the name of the wired network HOME b with the words quot internet access quot beneath and thats how im typing this right now I havent made any changes in the last two days I downloaded Advanced system care driver booster and malware fighter all from IObit but that was last week I dont see why it didnt make the wifi faili right away assuming it was that this just happened days ago the only thing downloaded by my brother was the facebook video callin add on which I uninstall already to rule it out I have ran ipconfig and as far as I understand which is not a lot internet with Laptop no access eveything seems to be in order dhcp is enabled I checked the Laptop with no internet access properties of the network and both the internet protocol TCP IPv and TCP IPv are enabled and set to automatically obtain IP address and DNS server ive tried other things here and there like uninstalling third party applications like apple BONJOUR and uninstalling avg which was expired anyway although it never gave me tha tissue before I also turned off windows firewall for a minute just to see but nothing works as soon as I unplug ethernet and connect to wireless it connects at first without the warning sign but as soon as I try to open a website it appears and fails surfing I dont know what to do I can copy the ipconfig results or anything you d like ONE MORE THING I CAN actually log in to the routers default gateway even while on wireless and no internet access displays Moderator note Moved out this thread - http www techspot com community t gh-ethernet-but-not-wifi post- nbsp

A:Laptop with no internet access

Advance System Care years ago used to be ok but tends to be mainstream and allows third party applications to install on there own if you are not careful. Get rid of anything Iobit related that is al junk I dont care what anybody says I remove it because after careful research Malwarebytes will tell you that it is malware. Anyway sounds like you could have an issue with a virus or malware being what you have downloaded. I would try to run malwarebytes to see if anything comes up if you are not familiar with it here is a link to download it. I understand you do not have internet so you will have to download it to a flash drive and run it on the computer. Post what it finds and we will go from there. If you can wire in and get internet let mek now that also. But it sounds like that wont work either due to the nature of your issue. http://ninite.com/malwarebytes/

Also what I would do is try to attempt a system restore back to when the first issue came up. That way you might be able to go back in time before the issues but if it is a virus this wont work. Just an idea./
 

http://www.techspot.com/community/topics/laptop-with-no-internet-access.199753/
Relevancy 18.06%

Recently I pulled a dell dimension 5150 out of my basement, dusted it off and got it running again with xp sp2 (I only had the installation disk for that one). With one exception. I'm using an Ethernet cable going directly to my router and it says that I'm connected to 1394 at 400.0 Mbps (which I found to be rather surprising) but I cant activate my windows (I wiped the hard drive and re-installed) or access internet explorer so that I can get chrome. If you need any other information please let me know. I am currently posting this from my current computer which has wireless and is working fine.

EDIT: I am posting this from my current computer which has wifi
 

http://www.techspot.com/community/topics/xp-ethernet-connected-but-i-cant-access-the-internet.199726/
Relevancy 17.63%

I've a wired network at home like this:

Code:
Internet
|
ADSL Router
|
Dlink Switcher
|
______________
| | |
PC1 PC2 PC3
I'm going to buy a new tablet (ASUS MeMO Pad Smart 10), which supports internet through wifi. I was wondering how can I share the internet access with the new device? What new devices should I buy and what changes are required to my network setup?

Thanks in advance.
 

A:How to share wired Internet access with WiFi device

I figured it out, I need an AP.
 

http://www.techspot.com/community/topics/how-to-share-wired-internet-access-with-wifi-device.199110/
Relevancy 18.49%

I have a personal computer at the boarding school I attend Access Limited an Asus G VW and whenever I try to connect to the main internet connection it says limited access I have also tried using Ethernet and it says unidentified network with the Ethernet Here is my IPCONFIG ALL below I also have Windows if that helps --------------------------------------------------------------------- Microsoft Windows Version c Microsoft Corporation All rights reserved C Users Herman gt ipconfig all Windows IP Configuration Host Name ASUS Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List cefpub local Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address E- -DE- E-FC- DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description VPN Tunnel Adapter Physical Address -FF- B- - B- E DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Ethernet Media State Media disconnected Connection-specific DNS Suffix Description Anchorfree HSS VPN Adapter Physical Address -FF- -F - D- DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address DC- -DE- E-FC- DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Connection-specific DNS Suffix cefpub local Description Qualcomm Atheros AR WB-EG Wireless Net work Adapter Physical Address DC- -DE- E-FC- DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe cc ba c f fc Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday December PM Lease Expires Monday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EE- B-E -DC- -DE- E-FC- DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Ethernet Media State Media disconnected Connection-specific DNS Suffix gateway wire Limited Access net Description Qualcomm Atheros AR PCI-E Gigabit Eth ernet Controller NDIS Physical Address - - D-EB-AA- DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap cefpub local Media State Media disconnected Connection-specific DNS Suffix cefpub local Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d abd a e ef f dd Prefer red Link-local IPv Address fe a e ef f dd Preferred Default Gateway DHCPv IAID DHCPv Client DUID - - - - -EE- B-E -DC- -DE- E-FC- NetBIOS over Tcpip Disabled C Users Herman gt nbsp

A:Limited Access

Well its probably the school network, do you have to register the machine with the network and enter passcodes etc. That sounds like it maybe the issue.

Also I would take down that stuff you posted with your subnet, IP, etc, its alot of personal information about your PC thats a little too much if you catch my drift.

Back on subject, I would first check if you have to register it or something first, then we can go from there.
 

http://www.techspot.com/community/topics/limited-access.198300/
Relevancy 17.63%

Hi, I've been away camping for a couple of weeks and now that I'm back my desktop computer no longer connects to the internet. As I state in the title, however; the signal strength says it's "very good".

I've tried removing the connection and re-adding it, I've tried moving the wireless USB/removing and potential disturbances, but to no avail.

Any help would be much appreciated!
 

A:Signal strength: Very good, Access: Limited connectivity

Turn off the Modem
Turn off the Router
Turn off the PC
Turn off all network gear

Do this for 30 seconds.

Then slowly turn on the modem (DSL or Cable)
Then the router
Any switches
Then the PC
Then the rest of your network.
 

http://www.techspot.com/community/topics/signal-strength-very-good-access-limited-connectivity.195843/
Relevancy 18.49%

Hi guys,
I need some help. I have aseagate 1TB ext. hard drive. I cansee it as G drive bit cannot access the files. Strangely I did get the same issue some time back and I ran th seagate tools and the bad sector was resolved. This time I was trasfereing the video files and after completing the task the drive is visible in my computer but I cannot access the files. Whole lot of data is stuck and pretty important too. Kindly suggest a solution.
Windows 8 in use

Thanks in advance
 

http://www.techspot.com/community/topics/cannot-access-files.195769/
Relevancy 17.2%

My Dell laptop recently stopped connecting to the wireless router at my house. Every other device in the house that uses the internet connects perfectly, however my laptop says that is connected, but above that it says "Unidentified Network - No Internet access". I haven't installed anything new on it except the latest version of Java. It is a Windows 7 laptop and this problem has never happened before. How can I fix it so I can use the internet again?
 

A:My Dell laptop will not give me access to the internet via my wireless router

Hi Algeroch,

Click on the links below to troubleshoot and resolve Wired and Wireless Networking Issues on your Dell computer.

Wireless Networking for the Home: http://dell.to/105mWOZ
Wired Internet Connection for the Home: http://dell.to/122rnZ5

Please reply if you have further queries. We would be happy to help.

Thanks and regards,
Babita G
#iworkforDell

For easy access to drivers, manuals and product updates, please visit our Support Site .
 

http://www.techspot.com/community/topics/my-dell-laptop-will-not-give-me-access-to-the-internet-via-my-wireless-router.194606/
Relevancy 17.63%

Hi. I use a 1tb external hard drive to store music, photos and movies. I use it on my Imac, also on my Asus e-book. I see that the external hard drive is partitioned into two. How or why I don't know. What I do know is that the first part is now full, and I cant see the second part when plugged into the USB on either computer. Could anyone help me by suggesting how I can access the second 500gig? Id appreciate answers in plain English, I really dont understand more than the basics, and the clearer ans simpler the answers the more I will learn, and thanks to all those about to read this !
 

A:Unable to access both partitions on external hard drive

Back-up all your data on the first partition.​
Right click on "My computer" and click "manage".This should take you to the computer management screen.​
Look at the left, you should see an option that says "Disk Management"; Click on it.​
You should be able to see all the disc partitions, find your External HDD partitions.​
Right-Click on the 2nd partition and delete it.​
After that right click on your first partition and select the option to "Extend Partition"​
​If you are confused, or need confirmation for anything please don't hesitate to ask.​
 

http://www.techspot.com/community/topics/unable-to-access-both-partitions-on-external-hard-drive.195074/
Relevancy 14.62%

Hey all new here Hoping for some advice Last night I was playing my games when suddenly my Bigfoot Network Adapter crashed I rebooted thrice attempting to have it come back to no avail I began using my Wireless adapter in its place The next morning I booted up to find that the Bigfoot Network Adapter had come back but with an issue My computer is showing that it is connected to the network and I can read all network computers and access copy write files to other systems on the network The issue is I have no internet on my computer I have tried booting multiple games with them crashing they never crashed as such before even with Internet' 'Access type: Internet no but no internet and tried even booting Skype which crashed when attempting to connect to the internet I m afraid I ve done some tweaking that I shouldn t have considering I was attempting to run my game with lowest ping But I ve only used installable proxy programmed such as SmoothPing and FixMyLag Any help would be appreciated Please PC Specs Intel Core i GHz GB Corsair Vengeance GB Vertex SSD Windows Ultimate SP If there s anything I ve missed do tell New to this fixing 'Access type: Internet' but no Internet stuff Cj nbsp

A:'Access type: Internet' but no Internet

Have you reinstalled your WLAN drivers?
 

http://www.techspot.com/community/topics/access-type-internet-but-no-internet.194794/
Relevancy 17.63%

Have a new Netgear wireless router and can connect to it, but can only get local access only, no internet.
Tried a few things with no luck so far.
The one thing that did work was eliminating the wireless security, but dont want to leave it that way.
Seems like this is a common problem with Vista.

Can anyone help?

Thanks
 

A:Local Access Only With Wireless Using Windows Vista

Go to the Device Mgr, expand Network Adapters and look for yellow or red flags. It's most likely that the driver is missing or needs to be updated.

If there's any driver at all, then the led lights near the ethernet cable will be on.

Uninstall the existing driver (but do not delete it) and reboot.
The system should find the device and use the autoconfig feature to install the
correct one.
 

http://www.techspot.com/community/topics/local-access-only-with-wireless-using-windows-vista.194148/
Relevancy 18.06%

Good morning everyone,

My database at work has hit a snag. Whenever I open it I get this error (see attach.) Once I click on yes, it still does not open. It just shows the loading circle (Vista) constantly...

A colleague and myself are the only ones who use this database - it holds 17,000+ files that we have to track. Hers works fine, albeit slowly.

Any help out there with this one? Always appreciated.

Thanks
 

http://www.techspot.com/community/topics/microsoft-access-database-issues.194266/
Relevancy 17.63%

My Sengate T external HD it access initialize Can't -- won't external drive hard has been working for years It has vital back ups files movies docs etc I CANNOT AFFORD TO LOOSE ANYTHING I am a DJ and also have over tracks on there I was using the external HD on a Windows laptop and accidentally pulled the USB cable out of the port while it was loading and changing the quot Permissions for SYSTEM and Authenticated User quot on a specific file on my external HD When I plugged it back in the drive showed up on my computer as normal but would Can't access external hard drive -- it won't initialize not open After reading a few posts I went to the device manager deleted the drivers for the external HD then when I Can't access external hard drive -- it won't initialize plugged it back in it updated the drivers and told me me my device is now working properly and ready to use and my drivers are up to date But now it wont show up on my Can't access external hard drive -- it won't initialize computer at all I went into disk management and the Disk had an icon with a picture of a HD with a red arrow facing down in a white circle under Disk it says Unkown empty line Not Initialized I then right clicked and it said offline When trying to get it back online it says quot The system cannot find the file specified quot In the properties under Volumes it says Disk Disk Type Unknown Status Not Initialized Partition style Not Applicable Capacity MB Unallocated space MB Reserved space MB When I try to Initialize Disk it says quot The system cannot find the file specified quot I have tried it on every port and on a different PC running Vista as well as on my TV which now says quot no USB device plugged in quot PLEASE HELP I NEED TO FIX THIS or at least find a way to BACK IT UP and transfer ALL the data onto another drive nbsp

A:Can't access external hard drive -- it won't initialize

Similar thing happened to me.. I'd love to hear an answer on how to recover the data as some of it is rather important.. Good luck DJC, I'll check back in and hopefully we will have our files back!!
 

http://www.techspot.com/community/topics/cant-access-external-hard-drive-it-wont-initialize.189277/
Relevancy 17.63%

Objects available : Laptop with windows vista(32 Bit Home Basic SP 2)
: iPAD
: Tata Docomo internet data card

PROBLEM : I connect to internet via data card on my laptop. I want to share this internet connection on my iPAD which I am not able to do.


After connection to internet via data card on laptop, I created a wireless ad hoc connection. Which creating ad hoc connection I do not get the option of " SHARE INTERNET".
On iPAD this network is detected and the iPAD connects to this network.
On Laptop it is then shown this way :-

MY LAPTOP -------------------- MULTIPLE NETWORKS ----------------- INTERNET

But still the internet on iPAD doesnt get activated.


Plz help. ...
 

A:Access data card internet on laptop through wifi

GOT THE SOLUTION.!!!
After extensive search on the internet, I got 1 solution. Unchecking the option "ALLOW SHARE OF CONNECTION" in properties of the data card internet. Then setting up of an ad hoc connection, will get the option "SHARE INTERNET CONNECTION".

Thank You
 

http://www.techspot.com/community/topics/access-data-card-internet-on-laptop-through-wifi.193231/
Relevancy 17.63%

I m hoping to get some help on this because I ve spent hours and hours during the last days trying to fix this problem on my own No luck Please I m trying to connect to a public wifi network at home on my laptop Lenovo ThinkPad and while it shows that the computer none but Unidentified network. Packets No access. internet set received. is connected to the network it shows quot unidentified network no internet access quot and I Unidentified network. Packets set but none received. No internet access. m unable to go online My housemate has a Mac laptop and it connects without any problems When I go to quot Wireless Network Connection Status quot it shows that packets have been sent but received Operating System is Windows bit This is what I get from the ipconfig all Windows IP Configuration Host Name Dasha-THINK Primary Dns Suffix Node Type Mixed IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Virtual WiFi Miniport Adapter Physical Address - - E-EE- - C DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description b g n Wireless LAN Mini-PCI Express Adapter II Physical Address - - E-EE- - C DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ecbc a a e Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - -D - F- F- - - E-BB-C -B DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe GBE Family Controller Physical Address - - E-BB-C -B DHCP Enabled Yes Autoconfiguration Enabled Yes As you can the default gateway is blank I run McAfee and I already tried disabling the firewall and then uninstalling McAfee thinking it s the cause of my problem but nothing changed When I try to ping I get lost and packets sent and received I hope someone will be kind enough to offer some ideas Thanks nbsp

A:Unidentified network. Packets set but none received. No internet access.

Autoconfiguration IPv4 Address. . : 169.254.161.62(Preferred)Click to expand...

that's the problem - - not attached to your router.
"Node Type . . . . . . . . . . . . : Mixed" is typically the reason.

save the attached file to disk and rename by removing the .TXT suffix

double click and allow the change.

disconnect the ethernet cable, wait 30 seconds and then reattach it

+30 seconds more and repeat the IPCONFIG /ALL

you should see Note Type hybrid and a real IP address
 

http://www.techspot.com/community/topics/unidentified-network-packets-set-but-none-received-no-internet-access.193127/
Relevancy 18.06%

I cannot know how the bios update so I need some help for the how the bios update.I want to install the newest driver but I can't figure out how the driver is in a .02 file and I can't make heads or tails of it can anyone help me?
 

A:How to update BIOS

astar master said:





I cannot know how the bios update so I need some help for the how the bios update.I want to install the newest driver but I can't figure out how the driver is in a .02 file and I can't make heads or tails of it can anyone help me?Click to expand...

please post the brand/model of your motherboard... I.e.: ecsg41-tm; intel dh55tc; asrock z77 extreme4
 

http://www.techspot.com/community/topics/how-to-update-bios.192864/
Relevancy 18.06%

Do you have to update or change the Motherboard to update the processor?

I have a Pentium 4 processor 548, 3.33GHz, 1MB L2 cache, 533MHz front side bus. Can one "Plug and Play" so to speak with an updated processor to the same Motherboard?
 

A:Motherboard/Processor update

Your CPU socket is PPGA478, P4 is the highest CPU this socket will support.

Even with LGA775 CPU socket, unless you had a motherboard that would support quad core, there would be little reason to upgrade over a complete system replacement.

In answer to your question to "Plug and Play", yes and no. Yes CPU's are basically plug and play, and No the motherboard must support the CPU first.
 

http://www.techspot.com/community/topics/motherboard-processor-update.192561/
Relevancy 18.06%

Hey guys, I've attempted a bios update through this website and I've been left with this sitting on my desktop for two days and the loading bar has not moved an inch.
I tried to update the BIOS because for the last few weeks when my computer is booting the screen would go blank and just stay blank and I would have to keep resetting until it would finally boot. I was hoping a bios update would do the trick otherwise I would not have bothered.

Im worried if I exit out or shut-down my computer I could corrupt my BIOS. Any ideas?..


 

A:Bios update help

I would exit and maybe try again. Thats the download phase which has nothing to do with the actual update process. The download will complete, before any attempts to update will begin. Updating the BIOS can be very risky, updating would never be handicapped by possible problems of downloading.
 

http://www.techspot.com/community/topics/bios-update-help.192433/
Relevancy 18.06%

Last week, I has a good time with my families and taken some great photos.
But, unfortunately, after plunging SD card into my laptop, it became really weird.
It was continuously telling me to format this SD card every time I attempted to open it in My Computer. But, I could see there is still 1GB data.
How could I access these photos without formatting?
 

A:How could I access these photos without formatting?

If you format the card, you will lose your photos and everything else on it for sure. I don't know if this will help but instead of plugging the card into the laptop directly, try leaving the SD card in the camera and use a cable (that should have come with the camera) to connect the camera to a USB port on the laptop. Refer to your camera manual for specifics but I don't think you need to install any software.

If this doesn't work, your SD card may have failed.
 

http://www.techspot.com/community/topics/how-could-i-access-these-photos-without-formatting.192435/
Relevancy 18.06%

Hi all,

I have a Micro SD card (4GB). When I put it to my computer (windows 7 ultimate 32-bit) from USB port, I can't access into it. And writes "Removable disk G:" (like below image) and doesn't show other specifications of that volume. And when I double click on it, a pop up window appears and says "Please insert a disk into removable disk G:". I used some commands line "chkdsk /f G:" in command prompt window, but it also writes "can not open volume for direct access". And also right click does not work on that volume for format it. In the command prompt also formatting results the same for chkdsk /f g: as message unfortunately.

Is there any way to access into that volume?
Thank you.
 

A:Cannot access to a MicroSD card

Is "removable disk G" there all the time? Often times card readers just show up in My Computer whether anything is in there or not.

What happens if you remove and insert the card while having Disk Management open? Does anything change in there?

Can you connect the device that uses the card to the computer through a USB cord? Is the card readable that way?

If those all fail, then, I'd suggest finding out what card reader it is and downloading the drivers for it (just in case) and then deleteing it through device manager and rebooting.
 

http://www.techspot.com/community/topics/cannot-access-to-a-microsd-card.192317/
Relevancy 17.63%

I've got a guy who wants to double password protect his wifi. I know that having strong encryption, and a long password with alpha-numeric and non-alpha-numeric characters would work better for him, but I'm not sure I can convince him of that. Is there a way that I can require two passwords to get into a wireless network?
 

A:Can I require two passwords to access a wireless network?

I dont think it is possible unless you invest in some expensive hardware such as those at businesses (where you need to login on a login page).
 

http://www.techspot.com/community/topics/can-i-require-two-passwords-to-access-a-wireless-network.192153/
Relevancy 17.2%

I run Windows WD MyPassport TB Problems first started about halfway into a Vuze transcode for a movie the randomly External WD HD denied messages. giving me access My started is original file and the transcode folder are both on the drive First it wasn t letting me My WD External HD randomly started giving me access is denied messages. right-click delete rename the option for those wasn t on the right click list but everything else was I restarted and still the same I did the Check Disk in the HD menu I ticked the recover bad sector box and it wasn t moving didn t feel like waiting so I stopped it My WD External HD randomly started giving me access is denied messages. and afterwards anything I tried to do gave me quot access is denied quot I forgot that I had formatted it into ExFAT so my TV would recognize it and I had movies files were gig in size which might cause problems It says under the security tab it is quot unable to display current owner quot I would really rather not format it s not even letting me select it for lack of privileges but if that s all I can do then so be it It s saying it has no used space or available space its half full nbsp

A:My WD External HD randomly started giving me access is denied messages.

I unplugged it and plugged it back in and it seemed to work, it said there was something wrong with it still and promted me to do another check disk scan which said there were no problems (I didnt select the "bad sector" option) (durr!) but I remember it doing something similar before, should I format it back to NTFS, Is that what is causing the problem?
 

http://www.techspot.com/community/topics/my-wd-external-hd-randomly-started-giving-me-access-is-denied-messages.191994/
Relevancy 18.06%

Hellow guys again ,, hello the best website ever !!!
I jus wanna ask about something ,, Earlier I mentioned something about upgrading my processor to core 2 duo ,, now ive done that but when ever I start my computer ,, this msg shows up !
""" 1801 - microcode update Error
Missing or invalid processor microcode update. please contact hewlett-packard company for a new microcode update to support the new processor stepping """
Any help ?
HP compaq dx7300 microtower is my pc and Intel core 2 duo E4500 @2.20GHz is the new processor.
Many thanks in advance
 

A:Microcode update Error ?

Have you tried contacting HP concerning it?
 

http://www.techspot.com/community/topics/microcode-update-error.191974/
Relevancy 24.94%

Hi, my sister accidentally pressed something in the router- (she things it was the repeater setting) now, I can no longer access the router. I still have internet access but I can't seem to access the router.

I tried searching via the cmd line. ipconfig /all and I got this:

Host name.... : xxxxx
Primary Dns Suffix...... (blank)
Node Type..... Hybrid
IP Routing Enabled.... NO
WINS Proxy Enabled... NO

Ethernet adapter Local Area Connection:
(disconnected)

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS suffix.... : (blank)
Description......... Ralink RT5390 802.11b/g/n WiFi Adapter

the confusing part was the Default gateway shows : 49.144.0.1 but the default router was supposed to be 192.168.1.1... it's beyond my google-fu powers.
 

A:Can access internet but can't access router

Your (all) routers always have two addresses; the public address (like 49.144...) give it by the ISP and the private LAN address (like 192.168.1.1 which is very typical).

To access and configure your router, place the LAN address of the router into your browser as a url and hit enter.
You should get a prompt for the router user-id/password.
 

http://www.techspot.com/community/topics/can-access-internet-but-cant-access-router.191927/
Relevancy 26.23%

I have been trying to block access to proxy sites without success. What I have done works on some but not all.

I've used a program called Internet Lock to block the port 443, but still I can access the proxy site.

I've put the name of the domain in the list of block sites, still it passes.

I tried to find out the IP address of the website, but I can't find it. Don't know if that would even work anyway.

One proxy site in particular seems to bypass all locks. https://unblockit.cc

If anyone knows how to block such sites, without losing access to gmail, yahoo mail, hotmail, it would greatly be appreciated.

Thanks

Mike
 

A:How do I block https(SSL) websites?

I think www.hidemyass.com will also bypass your locks. You can check its IP address using ping or nslookup. You can also block its ip address using your host file.
 

http://www.techspot.com/community/topics/how-do-i-block-https-ssl-websites.191753/
Relevancy 17.2%

A few months ago I updated my MSI Z A-GD to the latest BIOS quot vP quot which is still the latest settings Z68A-GD55 update won't MSI overclocking changes allow to BIOS after version on MSI s website as of today Since updating to this version the UEFI BIOS screen is totally different the layout has been changed entirely I was able to find the overclocking settings quickly but since the update the board will not allow me to change many settings All CPU Memory chipset voltage adjustments CPU ratio adjustments bclock adjustments etc are all either greyed MSI Z68A-GD55 won't allow changes to overclocking settings after BIOS update out and cannot be selected at all or they are set to quot Auto quot and that is the only available option for them This is a solid overclocking motherboard from what I ve heard online and I m running a K series CPU k so I m really perplexed as to why I can t even adjust the supposedly unlocked CPU ratio on my k I USED to be able to use these settings before the BIOS flash Also I can t seem to find anyone online who s having a similar problem as me As it stands now the only overclocking I can do is with MSI s quot OC Genie II quot which basically automatically overclocks for me I think this is totally ridiculous why is MSI s automated tool allowed to touch these settings when I can t modify them manually Anyone have any idea what s going on My first thought was that maybe there is a setting somewhere in the BIOS that must be enabled first in order to open up the overclocking settings but I searched far and wide and couldn t find one Any help would be greatly appreciated nbsp

A:MSI Z68A-GD55 won't allow changes to overclocking settings after BIOS update

Yeah, I think there is a setting somewhere that is checked to auto. Try exploring all the tabs of the BIOS screen and report back if you find anything.
 

http://www.techspot.com/community/topics/msi-z68a-gd55-wont-allow-changes-to-overclocking-settings-after-bios-update.191535/
Relevancy 17.2%

Our internet goes from:

Comcast modem to a
Dlink DIR-655
To computers or through a switchbox to other parts of the house
In the basement, is another switch box, and off that switchbox is,
Belkin 85c Wireless router, that we use as an access point
Works well but it says it has the ability to have a guest login, that will allow visitors to get to the internet, but are blocked from our LAN.

I've spent hours trying to set the guest login up, the access point can be seen by a computer/etc, but when they connect, they cannot get to the internet.

the windows 7 computers try to set up an unidentified public network.

I'm sure there is something very simple I am missing, but I've got close to 20 hours invested in it, and need to protect my network.

the Windows 7 notebook said that it could not connect with a "homegroup".
 

A:Belkin 85c wireless router, used as an access point. Guest setup?

Hmm; I cant find "Belkin 85c Wireless router" on the Belkin Support site - -
Are you sure of that make/model number?
 

http://www.techspot.com/community/topics/belkin-85c-wireless-router-used-as-an-access-point-guest-setup.190913/
Relevancy 18.06%

Hello! I'm new here at Tech Spot. This is a great website.

Where can I get a copy of the newest BIOS update for my motherboard?

Model: Asus P5GD1-VM Motherboard
Version: 0602
Chipset: I915
Date: 09/06/2005-16:48:11
Onboard Sound: Azalia (swa)
Onboard LAN: Exist (wl)
BIOS Size: 512 K
BIOS Type: AMI

I downloaded all BIOS .ROM files in the official website of Asus. But it weren't compatible with the BIOS to be flashed.

Please help me! Thank you very much in advanced!
 

A:Motherboard BIOS update

The latest BIOS for your board is version 1015. It's not necessary to load each BIOS in order, just load the latest. To load the BIOS you must copy it to a floppy disc and rename it P5GD1-VM.ROM If you didn't rename it, that's why it won't load. On the same Asus download page, you can get the user manual for your board, which goes into detail how to reflash the BIOS. It can render your motherboard un-bootable if you do it wrong, so I would read the manual before attempting it again, and follow instructions carefully.
 

http://www.techspot.com/community/topics/motherboard-bios-update.191021/
Relevancy 18.06%

My problem is I cant open the drive. But in My Computer window, it did display the drive but I cant do anything. Windows prompt me to format the disk which I already did but I got this popup "cannot open volume for direct access".

These are the solutions that I tried but failed:-

Use TestDisk but it doesnt even detect the drive.
Disk Management also didnt detect the drive.
Already used Command Prompt to repair the disk. It display this "Cannot open volume for direct access" which I run it as admin.

Here I provide a screenshot for reference.

 

A:Cannot open volume for direct access

Hmm; that's the primary partition with Windows on it - - can never format or partition the C:\ while booted from it

WHY are you attempting this?
 

http://www.techspot.com/community/topics/cannot-open-volume-for-direct-access.189735/
Relevancy 18.06%

I have 2 computers both running windows xp sp3. Both computers have all of the same services running and startup. Both computers are on the same network and CAN access the public documents folder from the server. However, only 1 computer can access the external network drive. The other gets an error of no permission to access it. Why can 1 access the external network drive and not the other? They both have the same configuration except being the same brand of computer. The network has 2 other clients running windows 7 which work fine. The server is running windows 7. None of the computers are running a firewall or other security. Any ideas?
 

A:Can't access eternal network drive

Are they logged in using the same user?
 

http://www.techspot.com/community/topics/cant-access-eternal-network-drive.189275/
Relevancy 17.63%

Hi I m a new member I recently decided to build my first PC Parts were Asrock Z Extreme MoBo Intel i K - LGA DDR Single stick GB G-Skill GeForce GTX GD OC Seagate Barracuder SATA TB w PSU Now for the problem - BIOS error Extreme update Z77 4 Asrock I installed everything correctly and got to POST so I decided to follow most Internet forum instructions to update my BIOS so I did so over the Internet flash update from the AsRock BIOS setup The problems arose after trying to update it via the Internet Now the motherboard won t even get to POST or show any signs or working Asrock Extreme 4 Z77 - BIOS update error on a monitor the fans for ten graphics card CPU and chassis all work the PSU is working fine But the Dr Debug is showing the status code which states in the description is that it is quot not used quot I don t know what to do iv taken out the graphics card and tried still the same disconnected everything except the socket and all pins are fine on the PCIe slots and RAM Any help would be appreciated ps I have a spare Gigabyte gt GB hanging round and was wondering if I can get the MoBo to work will it be worth sticking the in with the for any improvements however slight until I can afford another for SLI nbsp

A:Asrock Extreme 4 Z77 - BIOS update error

"Now the motherboard won't even get to POST or show any signs or working on a monitor" You might be able to get the motherboard to respond by removing the battery for a few minutes. If not, the motherboard may need to be replaced
 

http://www.techspot.com/community/topics/asrock-extreme-4-z77-bios-update-error.188524/
Relevancy 17.63%

Hi guys I am looking to upgrade my graphics card this christmas and was looking at moving up to a http www amazon co uk Asus-GeForc update card needed Graphics help s computers amp ie UTF amp qid amp sr - from a http www geforce com hardware Graphics card update help needed desktop-gpus geforce-gt- -channel My system specs are as follows Operating system Windows Home Premium x Service Pack build Install Language English United States System Locale English United Graphics card update help needed Kingdom Installed System Model Hewlett-Packard HP Compaq Elite CMT PC System Serial Number CZC XR Asset Tag CZC XR Chassis Serial Number CZC XR Enclosure Type Mini-Tower Processor gigahertz Intel Core i - kilobyte primary memory cache kilobyte secondary memory cache kilobyte tertiary memory cache -bit ready Multi-core total Hyper-threaded total Main Cirucit Board Board Hewlett-Packard Serial Number CZC XR Bus Clock megahertz BIOS Hewlett-Packard J v Controllers Intel R Desktop Workstation Server Express Chipset SATA AHCI Controller Display NVIDIA GeForce GT Display adapter HP LA Monitor quot vis s n CN RZ September Bus Adaptors Intel R Series C Series Chipset Family USB Enhanced Host Controller - C Intel R Series C Series Chipset Family USB Enhanced Host Controller - C D Multimedia NVIDIA High Definition Audio x Realtek High Definition Audio http h www hp com products quickspecs na na pdf lt Link to the user manual model is on the third page the Business PC I am currently using a GeForce Gt card which is quite old and struggles with performance on some games I am interested in the Asus GeForce TI but have no clue if it will even work in my machine I looked towards the manual for my pc and it suggested cards worse than I currently have and I want better performance not worse The manual says that I have x Full length PCI slots x PCI Express slot and x Full Length PCI Express x graphics The TI has according to amazon quot PCI Express amp PCI Express support quot and looking at the specifications of both on their respective websites the GT uses PCIE x and the GT TI uses PCIE Given that the GT is already working in a PCI Express slot is it safe to assume the would be compatible GT specs http www geforce co uk hardware desktop-gpus geforce-gt- -channel specifications GT TI specs http www asus com Graphics Cards NVIDIA Series ENGTX Ti DCII TOP DI GD specifications Would this card work and if not could you suggest a card similar in capability that would Thanks in advance nbsp

A:Graphics card update help needed

Yes that video card will work with your motherboard.

However, it may not be the best value for money compared to the current gen video cards on offer.

For example, the newer Nvidia GTX 660 is the same price as the 560 Ti and offers around 30% more performance. Alternatively, the AMD Radeon HD 7850 costs even less and still offers better performance than the 560 Ti. I would highly recommend you go with one of these (doesn't have to be that exact model of 660 or 7850).
 

http://www.techspot.com/community/topics/graphics-card-update-help-needed.188413/
Relevancy 18.06%

Hello techspot, Basically I think ineed to update my BIOS in order to run call of duty black ops 2, but I Don't know.

Basically when I try to run the game, my pc freeze's then shuts down and says no signal detected, I've been looking all over the inet to try find a solution and came across a forum where people were having the same problem. (They're all using AMD) Alot of the people there said they contacted there motherboard supplier's and asked for a flash drive update or something? to update their BIOS. After doing this they said the game started to work.
Please help.

my motherboard is a N68-VS3 FX, If someone could link me to the correct update for it that would be grand. im on windows 7 if that helps

Lee.

P.S , Sorry I think I posted this in the wrong section
 

A:BIOS update?

http://www.asrock.com/mb/overview.asp?cat=Download&os=BIOS&Model=N68-VS3 FX
 

http://www.techspot.com/community/topics/bios-update.187629/
Relevancy 18.49%

Hi,
I have wireless connection in my room and its working good.but I tried to connect through wire but am unable to do.when I connect lan cable to my lap from D-Link router it shows "UNIDENTIFIED NETWORK - NO NETWORK ACCESS"....Any one can help me to solve this issue
 

A:No network access

Turn your wireless adapter off on the laptop. Try rebooting the modem and router.
 

http://www.techspot.com/community/topics/no-network-access.185980/
Relevancy 18.06%

I noticed yesterday that HP was auto-updating wireless updates. After they had finished, my wireless capability was gone. There was a problem with my Intel Centrino N 1030 wireless driver, and have not been able to correct the problem. Also, when I try to restart it takes forever, and I get a notification when it finally does that there was a critical blue-screen error?
Please help!
 

A:Can't connect wirelessly after update

What version of Windows?
 

http://www.techspot.com/community/topics/cant-connect-wirelessly-after-update.185800/
Relevancy 18.06%

I have home network with two PCs, one running win 7 and the other running win xp, we share files and so forth normal network stuff and also the same modem, but recently the Pc running win 7 wont connect to the internet while there is internet access on the win xp,normally I would just disable the LAN adapter and it would work nut after we shut down it comes back with the same problem and upon disabling it doesn't work anymore.
 

A:Network connected but no Internet access

What type of network adapter do you have in the Windows 7 PC?

(Brand, etc.)

~Alex
 

http://www.techspot.com/community/topics/network-connected-but-no-internet-access.185729/
Relevancy 17.2%

I know enough about computers to follow advanced instructions but ive never dealt with WHATEVER my friend did to my computer and I dont really care but I need to reformat it and save read backup the hard drive heres exactly whats up simplified and I need a explanation of how to -Computer can turn on but it wont do anything - you cannot hold F or delete or anything because not even the first text appears - I cannot get a disk USB or anything else to boot from because it cannot get that far in loading what a basic computer is to even do that - it hard method access a externally drive to Explain computers can not respond to any kind of keyboard or mouse input and stays completly black altho a diffrent shade of black from either a off moniter or a Explain method to externally access a computers hard drive powered moniter with a off computer so I know the moniter is getting SOMETHING just nothing that does anything -it is not a faulty video cord it works fine on other computers I own and trying other monitors cords doesn t Explain method to externally access a computers hard drive work either -I have plenty enough space to do it the wrong way and install another OS while one is already installed and boot from that to backup the hard drive but the computer clearly cant even show anything let alone receive disk information or mouse or keyboard input to hit next anyway so that option is null -It is not overheated or underheated nor is it fan ishues or anything else stupid its clearly however more then a virus not to say a virus is also not present but unless some uber tier virus hit the net recently a virus is not the cause nor does it matter -I want to either preferably without taking it apart access the harddrive from another computer I have pretty much any cord it would require or to put it diffrently I have never needed a cord I did not own in the last year -I asume sence it stays powered on altho it doesn t do anything past that that the harddrive and disk drive the computer has are readable it just cant do anything about because it cant load anything to do anything so I asume theres some method to plug the computer itself into another computer and access the hard drive as a external or something to access it from another computer short of taking apart my computer with a screwdriver how do I access the hard drive externally and no I do not want someone to reply take it to a future shop or something thanks in advance I have never had a computer that couldn t emit video or rather cant even get to the process to emit video and honestly have no idea how to fix it il just reformat nbsp

A:Explain method to externally access a computers hard drive

Lets slow down and backup for a bit. You don't even need a hard drive in the system for it to post a screen. Unless you are simply trying to recover data, taking the drive out and connecting it to another computer is not going to gain you anything.

Disconnect the power cord from the power supply.
Take out all cards within the PC. If you don't have on-board graphics keep the graphics card in the PC.
Disconnect all drives, DVD's and HDD's.
Take out your memory modules so you can test them one at a time.
Pull out the coin size motherboard battery and put it back a few minute later.
Insert a memory module (try a different module later if you have more than one).
Make sure the monitor is connected
Connect the power cord to the power supply
Try and boot the system and then let us know what you see happening.

Are there any lights blinking or illuminated?
Are the fans spinning?

 

http://www.techspot.com/community/topics/explain-method-to-externally-access-a-computers-hard-drive.184910/
Relevancy 17.2%

Hi all I Acer update 8935g driver screen GPU blank after recently updated the driver for the Ati card in my laptop during the installation the screen had gone blank and has stayed that way ever since But first heres a back story I started having trouble with the laptop a few months ago when I assume the ati card had overheated and caused the screen to flicker this laptop comes with an Intel card also which you can switch to by pressing the power save button near the keyboard The intel card ran just fine and if I output the video through hdmi the ati card would work fine also Acer 8935g screen blank after GPU driver update which led me to Acer 8935g screen blank after GPU driver update believe that there maybe an issue with the screen Also if I kept pressing the power save button and switching between cards the ati card would eventually begin to work normally on the laptops screen I wanted to update my drivers today as they were a couple of years old I had trouble installing them in the past as there was a conflict between both gpu cards so I became frustrated and left it I used Ati s auto detect tool and it began to install the new drivers when the screen went blank I thought this was normal during a driver update but I left the laptop running and it stayed that way for over an hour So I turned the laptop off using the main power button Probably wasnt a good idea I imagine Now the screen just stays blank even if I try to switch to the intel card Any help on this issue will be much appreciated nbsp

A:Acer 8935g screen blank after GPU driver update

It might be the inverter or the backlight for the LCD. Have you tried using the HDMI output on both cards if the Intel integrated supports HDMI out?
 

http://www.techspot.com/community/topics/acer-8935g-screen-blank-after-gpu-driver-update.184711/
Relevancy 18.49%

Hi. Since a recent malware infection I have been unable to access one of the PCs on my home network. The PC shows up in the Network device list and maps but I get the 0x80070035 error message when attempting to connect to it. I can't ping it from either of the other two machines on the network even with its firewall disabled. I have searched many forums for a solution and followed all the recommended courses of action but have so far been unsuccessful. I have full access to the network from the problematic machine. Any help would be greatly appreciated.
 

A:Cannot access Vista PC on LAN

need more info on the " 0x80070035 error message"

get a command prompt and enter EVENTVWR.MSC
open the SYSTEM LOG and look for ERROR events
Find the first one, double click to see the details
*IF* it is your 0x80070035 error, click the little document icon below the down arrow
(which copies the data to your clipboard). Come back to this thread, reply and PASTE
the content
 

http://www.techspot.com/community/topics/cannot-access-vista-pc-on-lan.184218/
Relevancy 14.62%

hi all my daughter has told me she used to press the email button on her laptop and access her emails now it doesnt access the emails sorry not uch info .but does anyone have a clue what is wrong or what I could do or try thanks
 

A:Can't access email from email button

Does the laptop come w/ a program to customize keyboard settings? Maybe that a look at that. My Logitech keyboard came w/ a program called Setpoint which allows me to choose what email program to open when the button is pressed. I had an eMachine keyboard w/ an email button that opens up the default email program. So that's something else to check. Maybe the computer forgot what the default email program is.
 

http://www.techspot.com/community/topics/cant-access-email-from-email-button.183234/
Relevancy 18.06%

I am trying to get the wifi access point list nearby.I am using iwlist command but the result different each time each time I get the different list. Can anyone tell that what is the reason behind that as I think that while sitting at the same place result of iwlist should be same.
an other thing ,what does it men by quality and cell in ilwist response.
any helpful link ,reading material and guide line will be highly appreciated.
Ooo yes I am using ubuntu linux.
 

http://www.techspot.com/community/topics/access-points-list.182614/
Relevancy 18.06%

I get my internet through GVEC which is the electric company in my area. I live out in the country so this is the best I can get. It seems like every hour I lose internet access and I have to reset the router and or disable my NIC and re-enable it. It doesn't matter what I'm doing, I'll lose connection. I normally thought it was either the ISP or the router, but it still broadcasts wireless internet even while my computer doesn't have internet access which has RJ-45 connection to it. I replaced my NIC thinking it was that, but it still happens. I even have updated drivers. Can anyone shed some light on this or know what's going on to help me solve this issue?
 

A:Losing Internet access frequently

Have you talked to your GVEC electric company about this?
 

http://www.techspot.com/community/topics/losing-internet-access-frequently.181868/
Relevancy 18.06%

so im deciding to upgrade my mobo that supports pci 2.0 I was wondering does 2.0 support 2.1 because im going to put a budget radeon card in it note this is not a gaming pc just a little upgrade
 

A:Mobo update

Yes, PCIE 2.0 will support a 2.1 card.
 

http://www.techspot.com/community/topics/mobo-update.181796/
Relevancy 17.63%

Not sure if this should be in the OS section but here we go Can I use ubuntu to access my windows hard drive data I have a great deal of videos and photos on my hard drive with windows installed I need to reinstall windows it is having a array of troubles I will not get into those though Part of those troubles is windows not recognizing my new tb HD or any new USB device my hard Can access I Windows use to Ubuntu drive? 7 If it did backing up would be a piece of cake BUT my question is can I use Ubuntu which I just recently installed to store my stuff from windows on my new tb HD I want to simply grab my videos and Can I use Ubuntu to access my Windows 7 hard drive? photos using Ubuntu and throw them on my new tb hd then I plan to format and reinstall windows on my old gb HD I am not familar with Ubuntu how do I do this I looked around and mounted my new HD on Ubuntu but didn t get any farther then that Perhaps another option would be to install windows on my new tb HD with dual boot and then grab my stuff from my data from my old gb HD Can I even do either of these solutions Lastly where can I download windows again I got it when it came out and my download through microsoft from what I can tell expired I of course still have my key I bet there is somewhere on microsoft to download windows I am just not seeing No I do not want to go to the pirate bay or something and download windows I am sure there is a legit way to download a legal copy little help nbsp

A:Can I use Ubuntu to access my Windows 7 hard drive?

Use Knoppix is simple. See step 2 How to recover your folders/files when Windows won?t boot.
I think you'll need to find someone with an install CD and use your own activiation number to reinstall
 

http://www.techspot.com/community/topics/can-i-use-ubuntu-to-access-my-windows-7-hard-drive.181377/
Relevancy 17.63%

So I left my computer on for a routine virus scan yesterday and when I logged into the issue & timeouts URL-access, latency Slow gaming Star Wars Online game today I noticed huge latency spikes dropping my latency from ish to frequently When I tracert google com my request always seems to timeout after the th hop Code C Dokumente und Einstellungen Imposter gt tracert google com Routenverfolgung zu google com ber maximal Abschnitte lt ms ms lt ms ms ms ms lo br ber de hansenet net ms ms ms ge- - - - pr ber de hansenet net ms ms ms ms ms ms ms ms ms ms ms ms Zeit berschreitung der Anforderung ms ms ms bk-in-f e net Slow URL-access, timeouts & gaming latency issue Ablaufverfolgung beendet Since my computer was online the whole time I didnt change any configuration since then Can anyone point me into the right direction Windows XP SP Provider O Germany Alice Modem Siemens provided by my Provider Router NETGEAR WGR v but connection is wired nbsp

A:Slow URL-access, timeouts & gaming latency issue

Issue with your ISP? Call them and see if they are having any issues, if not, make sure nothing on your computer is using the network heavily (something like Pando Media Booster, it has been known to slow internet connections)

Torrent programs do the same thing, or can.

But otherwise, reset your modem/router, let them sit for 30-45 seconds and start them back up. See if the issue is resolved.
 

http://www.techspot.com/community/topics/slow-url-access-timeouts-gaming-latency-issue.180634/
Relevancy 17.63%

Hi I m hoping someone can help as I ve spent many evenings on access cannot allocated Flash not drives being and letter drive this problem and getting nowhere Flash drives not being allocated drive letter and cannot access When attaching a flash drive The autoplay pop up doesn t appear The device does light up initially The device doesn t show up in quot Computer quot The device doesn t show up in Disk Management - just Disk system reserved C and I and CD ROM The device appears in Device Manager under USB controllers as a storage device but I can t access it This happens with all memory sticks and occasionally with ipod etc but sometimes for no apparent reason they work All devices works ok with other computers times out of plugging in a device or turning on the USB attached printer will cause the computer to BSOD usually with IRQL NOT LESS OR EQUAL X A Devices are never allocated a drive letter The only thing I can think of is that I repartitioned the external hard drive which I attach to back up which may have confused the computer with driver numbers Possibly But this problem doesn t seem to have stemmed from then And I did fiddle with the System Reserved drive as I had back up issues and one of the solutions was Flash drives not being allocated drive letter and cannot access to rename it then I renamed it back again I think Sorry if I m vague on this but I m not at all computer savvy and the kids are Flash drives not being allocated drive letter and cannot access trying to access their homework on the memory sticks I m running Windows Home -bit Avira anti virus and the computer is about months old working ok until a month ago Can t think that we downloaded anything about the same time as the problem started but possible I ve tried to update all drivers that I can think of but the only one that needed doing was the Nvidia GeForce which was outdated All devices etc say they are working properly Anybody got any ideas But keep it simple if poss please Thanks nbsp

A:Flash drives not being allocated drive letter and cannot access

Have you tried Uninstalling the Mass Storage Device that shows up in Device Manager? sometimes reinstalling it can fix issues like this.

Do they work properly after a fresh restart?
Do they stop working after being in standby/sleep?

Other suggestion would be to reinstall Chipset Drivers and USB Drivers if your motherboard has seperate USB Drivers (Generally only for 3.0 boards)
 

http://www.techspot.com/community/topics/flash-drives-not-being-allocated-drive-letter-and-cannot-access.179377/
Relevancy 17.63%

Hello,

I'm trying to update the drivers on my Radeon x600 256MB graphics card with Windows XP 32 bit.

I downloaded the following file described as the ATI Catalyst Driver 10.2 (XP): download-euro <dot> oldapps <dot> com/ATI/10-2_xp32_dd_ccc_wdm_enu.exe

On running this download, it has installed Catalyst Install Manager in C:\Program Files\ATI\CIM\Bin, but I have no idea what I need to do next!

Running Install Manager and following the steps through seems to do something, though looking at device manager, it doesn't look as though the driver has been updated (it's still version 8.162.0.0)...

Thanks in advance
 

A:Radeon x600 XP driver update

Try the WDM Integrated Driver here :

http://support.amd.com/us/gpudownlo...px?type=2.4.1&product=2.4.1.3.13&lang=English
 

http://www.techspot.com/community/topics/radeon-x600-xp-driver-update.179750/
Relevancy 15.48%

I was running Win XP which finally failed and I was able to enter in safe mode (only, no networking) and ran all the tests I could think of. Hard drive is ok and so I attempted to repair WinXP from the installation CD. However, the PC failed to shut down and restart so I eventually force closed it. Now it won't even load past the initial black windows screen, don't even get the option of going into safe mode.

Is there any way I (or someone) could access the hard drive to retrieve the data? I guess I could reinstall the OS but don't want to do that yet as I'll definitely lose the data.

Any advice would be appreciated.

Thanks.
 

A:Win XP failed, repair failed -- can I access hard drive?

Sure, there are many ways. Depending on what you want in the end decides how to proceed.

If you have a lot of space free on the drive, you could boot off a linux dvd and create a new partition. You'd have to shrink the existing, then make a new one. Then you could just copy over the data from the old one to the new one. Then reinstall windows onto the old partition, and copy your stuff back (then delete the partition and expand the remaining to fill the rest of the space).

You can also just boot off a linux disk and copy it to a thumb drive or whatever.

Or you could remove the hard drive and place it in another computer.

Also, I'm not convinced you lose the data if you install Windows again. I'm pretty sure you can install without formatting the drive. Your programs won't work, but it shouldn't overwrite any of your data. This is a non-ideal solution though.
 

http://www.techspot.com/community/topics/win-xp-failed-repair-failed-can-i-access-hard-drive.179446/
Relevancy 26.23%

It seems everywhere i have looked lately the 6900 serious cards have disappeared and the ones i find are standard one that are stupidly overpriced for some unknown reason. Has anyone seen any sites that still sell good ones? (ASUS Radeon 6970 DirectCU II 2GB or similar)
 

A:Websites that actually have an HD 6970 available and not overpriced

A quick search on pricewatch says the item isn't available.
 

http://www.techspot.com/community/topics/websites-that-actually-have-an-hd-6970-available-and-not-overpriced.178712/
Relevancy 18.06%

I brought home a pair of Cisco AG series Access Points from work because the office is getting new ones I wanted to know if I could use one at home with my existing wireless router etc I don t have a lot of knowledge on how to configure these devices and I haven t had too much luck finding the answers I need Anyways I have one of the AP s set upstairs with Ethernet running down to my wireless router downstairs The on help Need access point adding WLAN router is a pretty basic Linksys WRT G that I ve had for awhile and should be compatible with any AP correct My problem other than not fully understanding how the access points work is the unit access point is detected by my wireless devices but they can t connect It appears as quot Need help adding access point on WLAN other network quot in available connections alongside my home network router Are they supposed to be one in the same or different IP addresses I downloaded and installed Cisco IP Setup Utility IPSU to try and configure the device but each time I try to put in the SSID I get an invalid error What exactly is the SSID on the access point supposed to be The same as my home network or router s SSID nbsp

A:Need help adding access point on WLAN

The SSID password is your home network's password.

I have a D-Link access point that I setup differently. It is connected by wire to my PC (through the built-in motheboard LAN port) and wirelessly to my router in another room. I configured the AP via my browser by typing in the AP's IP in the address bar to access the AP's configuration interface. From there I can access the various networks that are present, find mine, type in the password (for my home network). Save the settings and I'm done. You will need to know your device's IP to connect to it. You can probably get it from the manufacturer's website if you can find the manual for it there.

I'm not an expert in these matters and can barely configure my own AP but you can use any PC to configure the AP. Once configured the AP can be plugged into the LAN port of any PC, laptop or game console to access the internet wirelessly from your wireless router without further configuring. I have several PCs but I only use a couple at a time so when it is time to rotate an idle PC into activity all I have to do is to connect the AP to the PC's LAN port along with the power cord, monitor, speakers, mouse, keyboard, etc. and it's done. This way I don't need separate wireless adapters installed in each PC I own.

The way you have yours setup sounds like you are using the AP as a range extender. I don't have experience setting one of those up so I can't specifically help you with that.
 

http://www.techspot.com/community/topics/need-help-adding-access-point-on-wlan.178001/
Relevancy 17.63%

I have a dell vostro 1500 needing a fresh install of xpi got from a friend who had for some reason taken it all the way apart and when he put it back together the screen stayed black when you turned it on. i fixed that, but the keyboard will not work at all so i can't access the bios to change boot order. I have taken back apart and everything seems intact. I am assuming a usb keyboard will not kick on in time to let me access it either. . . so i am stuck
 

A:Can't access BIOS on Dell laptop because keypad isn't working

"I am assuming a usb keyboard will not kick on in time to let me access it either"...

Try this before you say you are stuck... Keyboards are cheap. Check them out on EBay
 

http://www.techspot.com/community/topics/cant-access-bios-on-dell-laptop-because-keypad-isnt-working.177633/
Relevancy 17.2%

I just built my first PC last week and things have been fine for the most part A few little problems here and there though This might be a little long-winded but I would rather give as ASRock Extreme 3 BIOS can't Computer though. boots fine Gen -- 3 anymore. access many details as possible My problem started ASRock Extreme 3 Gen 3 -- can't access BIOS anymore. Computer boots fine though. with finally organizing my cables and peripherals I plugged in my external hard drives different Seagate drives into rear USB ASRock Extreme 3 Gen 3 -- can't access BIOS anymore. Computer boots fine though. connectors ASRock Extreme 3 Gen 3 -- can't access BIOS anymore. Computer boots fine though. and when I booted up my computer kept going straight to BIOS without me touching any buttons I would try to exit BIOS and start windows but I would keep looping back to BIOS everytime When I unplugged them before I booted up my pc would be fine I could also access the data on the drives when I plugged them in after the boot I posted somewhere else about my issues and someone recommended disabling my usb and usb legacy support They also recommended updating my BIOS if it wasn t up to date Sure enough I went into my BIOS and my version was newest version is While I was in BIOS I disabled my USB and USB legacy support Saved and exited and my computer booted up I downloaded the windows option for BIOS and tried to run it but I kept getting quot Error Firmware does not have flash AFUWINGUI support quot So one question would be is this error a big deal I m not going to try to install it from windows so I feel like it won t matter After doing a little research I now see many people recommending not to do a windows installation of BIOS I should be flashing it with a USB drive I downloaded the flash version and put it on a USB thumb drive in FAT format like ASRock suggested When I turned on my computer I attemped to enter the BIOS by tapping F Windows ended up starting without going to BIOS I tried this several times as well as F F F and DEL but nothing seemed to get me into my BIOS So this is where I stand now I can t access my BIOS and my PC automatically boots to Windows even with my USB stick in I have a feeling it has something to do with the USB Legacy Support I disabled but I also don t know how to enable it without going into my BIOS Core i - ASRock Extreme Gen Corsair Vengeance GB x GB DDR - Corsair Force Series GB quot SSD Sapphire Radeon HD GB Corsair Enthusiast Series TX V W Windows Ultimate SP Microsoft Sidewinder X keyboard Logitech Anywhere Wireless Mouse nbsp

A:ASRock Extreme 3 Gen 3 -- can't access BIOS anymore. Computer boots fine though.

Is your keyboard USB or PS/2? Normally a USB keyboard will not work before booting until you've enabled it in BIOS already. So basically you need to use an older keyboard (or an adapter) the first time, and then enable USB in the BIOS to use your USB keyboard.
 

http://www.techspot.com/community/topics/asrock-extreme-3-gen-3-cant-access-bios-anymore-computer-boots-fine-though.176744/
Relevancy 18.49%

It was working fine until I awoke to find it had suffered a serious shutdown. From then on no internet access.

I am using sn HP Probook 4525s with Windows 7 the rest of my computers on my router are fine but they are hardwired. The laptop is the only one using wireless. I also have a port for a hardwired connection and I have tried it to no use.

I show a connection to the router but have no internet access. I contacted support but they only said I have a problem with my laptop and they can't help with that.

I am stuck. If anyone can help please give me some advice.
 

A:No Internet access

The first thing to verify is the device drivers.

right-click My Computer->Manage
find the Device Manager and click [+] to expand it
scroll to Network adapters
look for any red or yellow markers and get those resolve
(you can ignore any 1394 device; that's the firewire interface, not an internet device)

you can then see this post for common issues with networking configurations
 

http://www.techspot.com/community/topics/no-internet-access.175978/
Relevancy 17.63%

I have a 2 TB Western Digital My Book 3.0. The USB Port on my hard drive broke, so I can no longer access it on my laptop or desktop via USB. Is there any other way for me to access my data? Would I have to open it up?
 

A:USB port on external hard drive broke. How can I access it?

Short of taking it somewhere for repair, it sounds like you're going to have to open up the case to get inside the drive. Once you've done that, you have two options:

1) If the connector is still functional you can connect it to your computer with the case removed and transfer your data, or

2) You can disconnect the bare drive from the guts in your case and connect it directly to your motherboard so that you can read the data from it.

....or purchase another enclosure of the correct size 2.5inch or 3.5inch
 

http://www.techspot.com/community/topics/usb-port-on-external-hard-drive-broke-how-can-i-access-it.175780/
Relevancy 17.63%

I have a Thinkpad T61. My laptop says it's connected to the internet (wireless) but when I open up anything that uses the internet, there's no connection. For the 'activity,' it says 8 packets have been sent and 8 have been received. The number is very very slowly growing. Ethernet doesn't work either.



Also, I'm not sure if these help, but:

1. I got a virus a week ago (XP Security 2012 virus) and since then, the internet hasn't worked.

2. The icon for wireless isn't showing in the bottom right of the blue toolbar at the bottom of my screen.



Any ideas? Please help.
 

A:Lenovo T61 no network access -- says Internet is connected but no connection

First suggestion; delete the wireless show in View Network Connections
and wire a direct connection from the system-->router.

Begin there to diagnose / document what is occuring.

a) please document
Os System(xp,vista,windows), edition(basic,home,pro,...) and SP level
Your ISP
Your wiring layout
your router make & model number
the browser / version you are using
and name the firewall that is active
the name/version of your antivirus program

b) if you are on Vista or Win/7

google for "disable ipv6"
apply the FixIt for your system (ie disable all)
then reboot
c) when the system fails to connect do this:

start->run->cmd
enter IPCONFIG /all >myTCP.txt
the come back here and attach the myTCP.txt file to your follow-up

 

http://www.techspot.com/community/topics/lenovo-t61-no-network-access-says-internet-is-connected-but-no-connection.175230/
Relevancy 18.06%

Hi I hope this is a good spot to cannot Two routers and access a printer networked come for an answer Thanks in advance for any help At my business we have a server connected to a cisco router I m unsure of the model but I ll find out if necessary The cisco router is not a wireless router but I wanted to have wireless access for Two routers and cannot access a networked printer my phone and tablet and my quot tech guy quot told me I can t replace the existing router but could hook up a wireless router to the cisco one So I ve hooked up a TPLink Router and it works great I have internet connection through it My issue is - I have a printer which I used to be able to access through the network from any computer on the network Now that my printer and computer are connected to the TPLink Router I cannot find my printer on the network from a computer which is not connected to the TPLink Router - my quot tech guy quot won t respond to help me I think I m unclear and maybe this will help Router -- gt Server other computers Printer amp Router Router -- gt Printer amp My computer My computer can access the server and Printer amp Printer Server can access Printer Server cannot access Printer Please Please help It s so inconvenient having to use only Printer for work related stuff nbsp

A:Two routers and cannot access a networked printer

the issue is the wiring. If you took the link from router#1 to the wan side on router #2,
then there is no means to access router#1 resources.

fix:
a) use your browser to access router#2 setup (I assume you know how, if not ask).
then disable the DHCP service in this router
also disable the remote management port 8080
save the changes.

b) now take the wire out of the wan slot on router#2 and move it to a lan slot, leaving
router#2 wan empty.

Router#2 will then operate as a switch but still retain the WiFi support. All devices connecting
to it will get IP addresses from router#1 and thus have access to all resources.
 

http://www.techspot.com/community/topics/two-routers-and-cannot-access-a-networked-printer.174191/
Relevancy 17.63%

Situation A custom built hand-me-down PC albeit a good few years old now comprising of One getting multiple Problems using one OS's on whilst PC Internet access IDE Drive one partition with Windows XP Home - original installation One SATA Drive four partitions with Windows Vista Home Edition and XP Pro the other two partitions are currently spare - new OS installations Nvidia NF -S V Motherboard - BIOS now up-to-date with all relevant drivers -Wire BT Broadband Problems getting Internet access whilst using multiple OS's on one PC Business Hub Problem bearing in mind I have little knowledge of using multiple volumes and or Networking do s and don t s etc etc - hence the post XP Home on IDE drive will connect to the internet as it always has done via the Ethernet Cable connected to the Router but it does not recognise the Gateways USB cable option yellow exclamation mark in Device Manager - and it won t can t install a driver from any location - Router Installation CD Windows systems Windows up-date etc XP Pro on one of the new partitions on the SATA drive will connect to the internet but ONLY via the USB cable when connected to the Router - it s the opposite to the above problem when booting from that partition i e it does not recognise the Gateways Ethernet connection this time it s a yellow exclamation mark against the Ethernet Controller AND the SM Bus Controller - again neither will find install a driver from any location Vista on the other SATA drive partition works perfectly regardless of how it s connected to the same router i e USB cable or Ethernet - there are no yellow exclamation marks in Device Manager and all hardware and associated drivers are fine and detailed correctly Is it simply an XP thing when using multiple volumes and or partitions with the same router as the problem obviously isn t present when booting from the Vista installation or do I need to set certain parameters somewhere for all OS s to independently recognise all assocaited drivers regardless of connection type It s not a major problem as I can access the intenet regardless of which OS I use but it s a little annoying knowing that I have to use one connection method over another if I boot an XP installation Thanks in advance for any feedback or walk through tips that might help Oh and by the way as strange as it probably sounds yes I would like to have XP Home XP Professional and Vista Home Premium all on the same PC nbsp

A:Problems getting Internet access whilst using multiple OS's on one PC

Virtual Madness said:





Oh, and by the way, as strange as it probably sounds, yes, I would like to have XP Home, XP Professional and Vista Home Premium all on the same PC.Click to expand...

You could just use virtual machines for the other two operating systems -- assuming the hardware can handle the load of a VM (it should if you have Vista running) and you don't need to leverage massive resources for 3D or gaming on the VMs.

Your just tripling the complexities by running 3 host OS' in my honest opinion. While I agree they should all work, you'd only need to tackle one OS if you ran the rest as guests.

Out of idle curiosity why do you need separate XP home and professional versions, as well as Vista anyway?
 

http://www.techspot.com/community/topics/problems-getting-internet-access-whilst-using-multiple-oss-on-one-pc.174144/
Relevancy 26.23%

Hi,

Can anyone please help with this problem as it's driving me nuts. I am getting the DNS error when I try to go to certain websites ie. ebay.com. I've been in contact with my ISP but they don't seem to know how to fix the problem. My system consists of: WinXP Pro sp3, D-Link 2640R Router, wired connection. I'd be grateful any help. Thank you....

Verity25

I have managed to resolve this issue myself....
 

A:DNS error on random websites

Hmm, w/o more info, an inability to access common sites like "eBay" suggests your "Network Adapter" (not hardware, but a MS Networking driver) is corrupted. A number of things can cause this, but "AdWare" is the most common culprit. The problem has always been far too common with XP (and earlier). Much less of a problem since Vista/W7 made changes to those essential services far more unlikely.

If you can, I suggest you try connecting another PC to the same internet connection and see what you get. Or, if you're computer savvy enough, I recommend downloading a free copy of Ubuntu Linux and connecting to the Internet with the "Live CD" (a way to test the OS w/o installing it.) Both methods will rule out an issue with your ISP.
 

http://www.techspot.com/community/topics/dns-error-on-random-websites.173963/
Relevancy 18.06%

Suddenly one of my hdds dropped from windows it shows as failed in disc management and cant be reactivated from there Tho its seen in a bios boot and in device manager even says device is working properly When i checked bios i did it in ways with and w out bad hdd hooked up To hook it up i unplugged a working sata port - ST As- HDD BIOS device can't in but and manager it access seen GB and hooked problem HDD to that sata port when i rebooted into bios and checked what i seen on port was now ST AS- GB Does this seemingly point to fact this is the problem HDD being seen in bios now i decided to check Ie Device manager and it shows ata devices named ST AS so to assure myself i boot down HDD seen in BIOS and device manager but can't access it unhook problem drive and reboot now in device manager disc drives i see only one named ST AS when i re hook the problem hdd device manager shows both again So it appears device manager and bios see this HDD thats giving me nite mares i ve tried active undelete and BadCopy Pro But obv theyd fail as windows isnt seeing this drive As in my re search of last several weeks ive heard the SATA drive may be taking itself off line if Windows try to access it too much and that a sata usb bay cable s may sort me out here as im told some have had success when hooked in the traditional way a sata drive fails If this is possible i wont mind another purchase but the software has already set me back a fair bit PS ive seen the youtube video on swapping out the pcb but im also told matching a pcb is near impossible and it shows no physical damage i can see it seems a huge long shot its the pcb i also hear drive getting power and once or x i heard access noise Any further direction in this matter is appreciated Cheers nbsp

http://www.techspot.com/community/topics/hdd-seen-in-bios-and-device-manager-but-cant-access-it.173486/
Relevancy 17.63%

Hi all,

I have a WD external hard drive. Yesterday, when I connected it to my laptop, it was detected but when I tried to access it through my computer, there was no content available. When I looked at its property, I found out the following;

Used Space: 0 bytes
Free Space: 0 bytes

I then went to My Computer > Manage > Disk Management. I found out that the drive is not available in the list.

Is my hard drive corrupted?

Would appreciate if anybody out there can help me on this. Thanks
 

A:External hard drive detected but cannot access content

"Is my hard drive corrupted?" Most likely yes. Please learn to back up important data on CD, DVD or Blu-Ray media. These type media are non-volatile and are better than solid state memory flash drives
 

http://www.techspot.com/community/topics/external-hard-drive-detected-but-cannot-access-content.172998/
Relevancy 18.49%

Hi all,

I decided to re-install my OS on Saturday as my kids had filled it with a lot of junk and I thought a nice clean re-install would be a good idea. Switched the boot sequence to CD drive and off I went. No problem until I had finished the installation and when I tried to get into the BIOS set up I can't, the screen simply hangs on the Asus graphic with the words "Press Del to go to set up". The issue I have now is that I need to have a boot CD in to continue to use the PC.

Can anyone think of any reason why I can't access the BIOS setup or is there another way in?

MoBo - Asus PG5c - mx/1333
OS - XP Pro SP3

Many thanks

Sam
 

A:Can't access my BIOS set up

Are you using a usb keyboard or hardwired? This can be a problem at times with a usb keyboard.
 

http://www.techspot.com/community/topics/cant-access-my-bios-set-up.172205/
Relevancy 17.2%

I am very very frustrated since I waited a while to get this motherboard from china. My last DFI board randomly died on me and I ordered this as a replacement because I wanted a decent 775 board. I worked on it all night tonight and despite it reading all the hardware... it will not boot unless I reset the cmos every time. On top of that... I can not get the bios to update... it doesn't read any of the 5 usb drives I tried (fat/fat32). Also I tend to get this grey screen when trying to flash it sometimes. I am beside myself at this point after fussing with it for hours on end and I really need some help.
 

A:Asus P5E3 BIOS won't update and needs CMOS reset to boot every time

Sounds like either the BIOS is corrupted or the motherboard battery is a goner.

Have you tried burning the new BIOS to a bootable CD ?
 

http://www.techspot.com/community/topics/asus-p5e3-bios-wont-update-and-needs-cmos-reset-to-boot-every-time.171511/
Relevancy 18.06%

Need to get data from an old desktop - it's video card went bad.

Plugged in the network cable and I can see it connect to the network. Try logging on but it seems that I have forgotten my username. Any work-arounds to accessing the list of users on this so I can get to my data without replacing the video card right away? I know my password, just forgot the user name.

Thanks.
 

http://www.techspot.com/community/topics/trying-to-access-another-pc-that-has-a-bad-graphics-card.171096/
Relevancy 18.06%

Some people on our network can access our homepage, but others can't. I've checked routing, rights, our web filter and I cannot find anything that would cause this.
The people who host our website can't seem to find anything wrong on their end either.
Any ideas?
 

A:Some people on the network can access a website, but others can't

Is everyone on the network using the same antivirus, anti-malware and firewall software?
 

http://www.techspot.com/community/topics/some-people-on-the-network-can-access-a-website-but-others-cant.169819/
Relevancy 17.63%

I am looking for a way to bring an old IBM desktop machine that I built Into more sutible working conditions. Does any one have any Ideas on how I can update the innerds of my computer?
I know this very vauge but I dont have the computer with me now and am looking to stock up on what I need (Info and parts) Before I get back to it.
\Thanks?
 

A:Best way to update graphics on five-year-old IBM desktop

We heed to know the components you have before we can recommend upgrades. What is the IBM model number - or better a link to the IBM spec list for it - and what new components did you put in?

Also, what is your budget and how do you use the PC?

For a starter on learning about video card upgrades, I recommend this site:

http://www.upgradevideocards.com/

Pay particular attention to the criteria page that addresses system constraints in the upgrade process - and helps you define your wants and needs in a way that is useful:

http://www.upgradevideocards.com/criteria.html
 

http://www.techspot.com/community/topics/best-way-to-update-graphics-on-five-year-old-ibm-desktop.169271/
Relevancy 15.91%

I bought a used HP 9100C digital sender and I get a "Network Access Failure" error message on my pc when I try to create the "HP 9100C Login with the HP software. Any thoughts?
 

http://www.techspot.com/community/topics/i-bought-a-used-hp-9100c-digital-sender-and-i-get-a-network-access-failure.167938/
Relevancy 17.63%

I have an external hard drive I was hard external drive Gaining access to trying to cut off permissions to view it under any account but mine I went to quot security tab quot and must have done something Gaining access to external hard drive wrong because then when I would look at quot My Computer quot it would show my external hard drive but wouldn t give any information all it said was NTFS If Gaining access to external hard drive I d try to open or anything it d say access denied although i am administrator I went back to security tab and the users it shows is quot SYSTEM quot and quot ADMINISTRATORS quot both say full access but I can t Gaining access to external hard drive view the hard drive files I went in under safe mode and tried to view it and it let me open the hard drive to view all folders in it but I could not open any of the folder beyond that point Now back in normal windows mode when I view quot My computer quot I see this Computer management - gt Disk management now shows this Before I mess this up more can someone please help nbsp

A:Gaining access to external hard drive

I tried opening command prompt as administrator and typed
cacls ?Path to folder\folder name? /E /T /C /G Administrators:F
all still says access denied
 

http://www.techspot.com/community/topics/gaining-access-to-external-hard-drive.167317/
Relevancy 43.86%

There are some Japanese flash game websites on a domain called web.fc2.com. I can access some but not others, getting a timeout error.

I can't get to ancho.web.fc2.com and detarou.web.fc2.com . I can get to pi3141592c147.web.fc2.com and yoinouchi.web.fc2.com . I've pinged all four and get very similar results - I know 'similar' is not 'exact' but I am not techy enough to read/understand ping results.

A possibly relevant pair of messages I get from pinging via dnsstuff.com are
- The destination appears to block unwanted UDP packets.
- There appears to be a firewall at <ip address> (hop 1) that blocks unwanted TCP packets.

Both my windows xp and my ubuntu box have the same problem, so it's not a hosts file issue or a system based blocking software. Might be my router?

Thank you...
 

A:Can't access some websites -- same domain different subdomain

fallinghawks said:





There are some Japanese flash game websites on a domain called web.fc2.com. I can access some but not others, getting a timeout error.

I can't get to ancho.web.fc2.com and detarou.web.fc2.com . I can get to pi3141592c147.web.fc2.com and yoinouchi.web.fc2.com . I've pinged all four and get very similar results - I know 'similar' is not 'exact' but I am not techy enough to read/understand ping results.

A possibly relevant pair of messages I get from pinging via dnsstuff.com are
- The destination appears to block unwanted UDP packets.
- There appears to be a firewall at <ip address> (hop 1) that blocks unwanted TCP packets.

Both my windows xp and my ubuntu box have the same problem, so it's not a hosts file issue or a system based blocking software. Might be my router?

Thank you...Click to expand...

Might I ask what browser you are using? Using my Google Chrome, I can access http://ancho.web.fc2.com/ & http://yoinouchi.web.fc2.com/
 

http://www.techspot.com/community/topics/cant-access-some-websites-same-domain-different-subdomain.165721/