Windows Support Forum

Black screen with cursor after windows logo, GPU driver problems

Q: Black screen with cursor after windows logo, GPU driver problems

Hi guys Just recently when I was playing a game the display on my laptop suddenly black out and there were some lines I manually power it down by holding the power button When I on it again the cursors and the images were haywire Subsequently whenever I on my laptop I will see the windows logo and after that the desktop never loads I only see a black screen with my cursor At the moment the only way for me to bootup normally into Windows is to disable my AMD Radeon HD M adapter and use after problems logo, Black with cursor windows GPU driver screen the standard VGA adapter I tried many things but I am still unable to fix Black screen with cursor after windows logo, GPU driver problems the problem I still cannot use my AMD Radeon graphics adapter I took the following steps I perform chkdsk f I installed the latest AMD display drivers from their website I updated the drivers from device manager drivers I did a startup repair but no problems was found I used windows memtest but no errors were discovered I formatted my windows partition reinstall windows and reinstalled all the drivers from my PC Samsung manufacturer software and drivers disc I used windows update and update everything I tried the fix it registry as per microsoft website I press F Black screen with cursor after windows logo, GPU driver problems and used last known good configuration settings Is my graphic card faulty Thanks

Relevancy 100%
Preferred Solution: Black screen with cursor after windows logo, GPU driver problems

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Black screen with cursor after windows logo, GPU driver problems

Boot into Safe Mode with networking to see if the problem persists there.
 
Safe Mode uses a limited number of drivers and applications.  One of the driver is a graphics driver.  If Windows boots to the desktop it most likely is the graphics driver.
 
What is the make and model of this laptop?
 
Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane.
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.

http://www.bleepingcomputer.com/forums/t/544959/black-screen-with-cursor-after-windows-logo-gpu-driver-problems/
Relevancy 102.34%

Hi,

I've been running Vista for a few months now without much complaint until recently. After booting, the green loading bar is followed by the windows logo before the screen flickers several dark colors and then produces a black screen with a movable cursor. The hard drive light remains unlit after the black screen. Running in safe mode gives the same result. I do not have a repair disk and I would rather not wipe the hard drive with a factory default disk as I have important data on my hard disk.

I am running Toshiba Satellite with an Intel Core™2 Duo Processor T5550, 2 GB RAM and an ATI Mobility Radeon™ HD 3470 - 256 MB

I've been trying to restore my pc for a few days now with no luck. HELP!

Thanks

A:Black Screen and Cursor after windows logo

Originally Posted by revor


Hi,

I've been running Vista for a few months now without much complaint until recently. After booting, the green loading bar is followed by the windows logo before the screen flickers several dark colors and then produces a black screen with a movable cursor. The hard drive light remains unlit after the black screen. Running in safe mode gives the same result. I do not have a repair disk and I would rather not wipe the harddrive as I have important data on my hard disk.

I am running Toshiba Satellite with an Intel Core?2 Duo Processor T5550, 2 GB RAM and an ATI Mobility Radeon? HD 3470 - 256 MB

I've been trying to restore my pc for a few days now with no luck. HELP!

Thanks



I`m no Vista PRO, but the first thing i would do is:

Run Vista Startup Repair, that can be found in the tutorials.
(It is quite easy, just boot from the CD, and Repair it.)

If this doesn`t work, try to boot in safe mode and then Backup your things.
(To run in Safe Mode, i use the method, turn on wait until the vista logo comes, then turn off by the button, so next time you boot, you can choose to Safe Mode)

Backup the computer by a External Drive. ( Don`t use DVDs, its a waste)

http://www.vistax64.com/general-discussion/178603-black-screen-cursor-after-windows-logo.html
Relevancy 101.48%

I have my OS installed on my SSD. Sometimes when i power on my computer, after it shows the windows logo screen there will be a black screen with cursor for like 15-20 seconds before logon screen comes on. This doesnt always happen, i find it doing this most of the time if i had the pc off over night and power it on in the morning.

A:few seconds black screen with cursor after windows logo

It's not abnormal to have a black screen before the login screen. 15 to 20 seconds is a little long if you're using an SSD, but during that time Windows is loading drivers and all of the stuff in your system tray.

Have you got a lot of programs in your system tray? Or set to load at bootup? Try using msconfig and setting all of the startup programs to off, except your anti-virus and see if that speeds things up.

http://www.sevenforums.com/general-discussion/368233-few-seconds-black-screen-cursor-after-windows-logo.html
Relevancy 101.48%

I have a problem with my dell inspiron n5110.After the windows logo, it appears just a black screen with a mouse cursor. Could someone please help me?

http://en.community.dell.com/support-forums/laptop/f/3518/t/19981686
Relevancy 101.48%

This isn't exactly a BSOD problem but it's a Windows failure nonetheless It has progressively been getting worse for months On my ThinkPad laptop I have been getting startup failures lately past months or so out of the laptop's -year life Everything is normal up until the quot Starting Windows quot page with the Black immediately Windows cursor screen with following logo shimmering four-color logo However after this disappears and before the logon screen the computer gets stuck at the black screen with the mouse cursor but no text of any kind and no spinning blue quot thinking quot circle next to the cursor The only way to get out of this is to do a hard shutdown and reboot The startup process NEVER gets frozen after the login Black screen with cursor immediately following Windows logo screen even though there is also Black screen with cursor immediately following Windows logo a black screen with a cursor at this point and Windows works normally at all other times At the beginning it would happen once every - weeks or so always on the first boot of the day and never during a restart always when booting quot from scratch quot Furthermore after powering down Windows would boot normally on the second try or occasionally on the third try As time went on it got to the point where sometimes I could not get into Windows unless I Black screen with cursor immediately following Windows logo performed a System Restore from within Safe Mode Windows has always been able to start in Safe Mode It did not matter what restore point I chose or if any programs or updates had been installed since the restore point--just the mere fact of having System Restore run seemed to fix the problem Just booting into Safe Mode and then shutting down quot cleanly quot without running System Restore did NOT work Within the last week or so it has gotten much worse Now on nearly every startup--including restarts--I get this problem and have to run System Restore to get to the login screen outside Safe Mode Yes this means that after restoring to a certain point then browsing the web or typing documents for a few hours then shutting down I would have to restore to that same point again for it to work Today after installing a bunch of desperately needed updates it got even worse--the next time I booted the machine even System Restore failed to fix the problem because the restore process would be interrupted every time by stalling at a black screen While in Safe Mode I read on this forum about the driver verifier and ran that--this required a reboot and this time it started up fine So to summarize Windows hangs on startup between the Windows logo and the login screen and has progressively been doing this more often The only solution is to quot poke quot Windows enough by restarting in different random ways until I find a way that it works Soon I know it will become so corrupted that I won't be able to start it outside Safe Mode at all Any help would be appreciated I should mention that the battery HAS lost more than half of its capacity However this problem is NOT circumvented by removing the battery and starting up with the computer plugged in--therefore I know that the problem isn't a critically low battery I also occasionally get quot Fan Error quot messages immediately on powering up the machine--however these are much rarer than the above

http://www.sevenforums.com/performance-maintenance/379933-black-screen-cursor-immediately-following-windows-logo.html
Relevancy 101.48%

Hi everyone Yesterday I wanted to install OS X Mavericks on my HDD It requires a primary partition so I decided to delete the MB system reserved partition that Windows automatically creates when you first install it I read this guide which explains how to transfer all the boot files from the system reserved partition to the partition where Windows is installed I followed all the steps with Black 8.1 screen cursor logo past Windows except for the last one When it says to do a Code reagentc enable I skipped it because when it first says to do Code reagentc disable the output of the program was quot reagentc was not enabled quot so why enable it if it was already disabled Later I will understand that maybe this was the source of all Black screen with cursor past Windows 8.1 logo future problems Then I rebooted and tried to delete that system partition from within Windows but of course it prevented me from doing that I booted gparted live and went on and deleted the partiton Now Windows would not boot and I did not have Windows disc to make a system repair So I put Windows disc and it managed to put boot files back it did not detect any windows installation but still managed to make Windows boot I forgot to say that I have another primary partition other than windows and it's a boot partition where GRUB is installed So I booted in linux and reconfigured GRUB to make it boot my Windows partition dev sda instead of the just deleted one dev sda I rebooted and Windows started fine Then I launched the Utility for creating and editing partitions because I wanted to reduce the main Windows partition and make space for Mavericks At this point Windows told me that the drive had problems and I had to do a chkdsk before resizing the partition I rebooted chkdsk finished and I got a Black Screen Of Death which told me that there were some problems with the partition but I could still press enter and go on Here I had a one-element list like the one you get when you press F at boot time The only entry was quot Windows Pro Recovered quot I pressed enter I went on and boot logo appeared Then it gets stuck on a black screen with the cursor and keyboard working actually I can move the pointer and put my laptop in standby and so on But no way Windows actually boots I can say I have tried everything I have now a Windows USB install and I tried fixmbr bootsect nt c bcdedit and so on but they failed Automatic repair fails as well and C Windows System Logfiles Srt Srttrail txt says that there are no errors Refresh does not work I run a Code chkdsk c r f but it says there are no bad clusters and it ends with quot failed to transfer logged messages to the event log with status quot Anyway I can see all my files from the elevated command prompt I get with the USB with Windows on it so at least my files are safe I know I wrote a lot and my english is terrible but please do you have any suggestion Thank you EDIT SOLVED I formatted

http://www.eightforums.com/general-support/47669-black-screen-cursor-past-windows-8-1-logo.html
Relevancy 100.19%

Ok it all started when I XP cursor won't Black no Windows screen after with the screen. logo boot. ran Nod antivirus I ran it because I had some viruses on my computer that I wanted to get rid of After the scan there were some detected objects that were quarantined or deleted So then I restart my computer and after the windows xp logo there is just a black screen with no cursor And after awhile the computer will just Windows XP won't boot. Black screen with no cursor after the logo screen. restart and try booting up again I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor The last known good configuration doesn t work either I m pretty frustrated because I did nothing wrong I am also having a feeling that nod might have quarantined some infected files that are essential for Windows Xp to boot I also do not have any windows xp disks with me because I lost them a very long time ago Is there anything I can do to fix my computer Thanks nbsp

A:Windows XP won't boot. Black screen with no cursor after the logo screen.

https://forums.techguy.org/threads/windows-xp-wont-boot-black-screen-with-no-cursor-after-the-logo-screen.941897/
Relevancy 100.19%

Hi everyone I know it's not a blue screen and I'm sorry if it's not in the good section But I really need some help and ideas boot screen logo mouse with windows cursor on Black after I Black screen on boot after windows logo with mouse cursor posted this topic on AMD forum My computer HD I k windows is having some annoying trouble when I boot I get a blackscreen but with some light switching backlight I guess after the windows logo I have my mouse cursor and I can BLIND type my password then I hear the sound of windows starting But I still have a blackscreen I don't know if their was any driver update I was on holidays my friend using my computer and he didn't notice any changes he doesn't know if their was any auto update he didn't do any manual update Anyway I uninstalled AMD driver got my graphic card in vga mode and it boots fine I did many quot clean quot uninstalls for AMD driver by software menu in windows with the clean uninstall amd software with DDU both in safe and normal mode Nothing changes still get a black screen with mouse cursor I tried installing other driver version i got a whql one for I think same problem I tried with many drivers same problem all the time I tried installign drivers manually by device manager and with amd setup I tried custom installs and full installs My windows was up to date I tried sfc scannow no errors In the end I tried a clean WINDOWS install So I formated my ssd and re installed windows and Still the black screen when I install the newest AMD driver I read somewhere it could be a problem with ahci but in sys files i only see amdsata sys and amdxata sys i don't see otherssata drivers like amd sata xata sys so I didn't try to delete them like it was advised in some post I read Because I have ssd i can't go in IDE mode i tried anyway it showed the quot no operating system quot message I think it's a leftover of AMD driver that I can't manage to delete or even find Any ideas guys I googled and tried for more than hours out of ideas now

http://www.sevenforums.com/general-discussion/380380-black-screen-boot-after-windows-logo-mouse-cursor.html
Relevancy 100.19%

Hello I hope someone here can help with this older computer This is an Windows XP Hp Pavilion a c machine that was showing signs of the hard drive Wont boot, cursor screen right before black windows with logo going bad due to reallocated sectors A new hard drive was purchased and using Acronis a clone of the drive was made The original drive is still booting and working ok but a little slow at times Also windows did have some malware programs on Wont boot, black screen with cursor right before windows logo the drive which were cleaned up with combo fix malware bytes and some Wont boot, black screen with cursor right before windows logo other cleaning programs before the clone The original drive still boots fine in the computer but the new drive Wont boot, black screen with cursor right before windows logo will get past the bios loading screen and sit there with the cursor You can press ctrl alt delete to reboot and you can boot to cd's such as knopix or hirens which i have done to check on things I have since downloaded the latest bios from HP and installed it using the old drive I have also ran chkdsk and selecting to repair I have also tried re-cloning the drive in case the clone might have gone bad even though no errors were reported The hang is before it starts to load windows so no f for safemode From reading other forum posts I suspect that a rootkit might be the issue however with the original drive booting fine I am not sure I would like to try to fix the problem rather then a re-install since there are a lot of important programs that would be difficult tore-install again But the more I have looked and tried that is starting to look like the only option I am not sure if help is still being provided for this old of a system but I would appreciate any help anyone can give Thank you

A:Wont boot, black screen with cursor right before windows logo

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/533518 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of this page). In that reply, please include the following information:If you have not done so already, include a clear description of the problems you're having, along with any steps you may have performed so far.A new DDS log. For your convenience, you will find the instructions for generating these logs repeated at the bottom of this post.Please do this even if you have previously posted logs for us.If you were unable to produce the logs originally please try once more.If you are unable to create a log please provide detailed information about your installed Windows Operating System including the Version, Edition and if it is a 32bit or a 64bit system.If you are unsure about any of these characteristics just post what you can and we will guide you.Please tell us if you have your original Windows CD/DVD available. Upon completing the above steps and posting a reply, another staff member will review your topic and do their best to resolve your issues.
Thank you for your patience, and again sorry for the delay.
***************************************************
We need to see some information about what is happening in your machine. Please perform the following scan again: Download DDS by sUBs from the following link if you no longer have it available and save it to your destop.DDS.com Download LinkDouble click on the DDS icon, allow it to run. A small box will open, with an explanation about the tool. No input is needed, the scan is running. Notepad will open with the results. Follow the instructions that pop up for posting the results. Close the program window, and delete the program from your desktop.Please note: You may have to disable any script protection running if the scan fails to run. After downloading the tool, disconnect from the internet and disable all antivirus protection. Run the scan, enable your A/V and reconnect to the internet.
Information on A/V control can be found HERE.As I am just a silly little program running on the BleepingComputer.com servers, please do not send me private messages as I do not know how to read and reply to them! Thanks!

http://www.bleepingcomputer.com/forums/t/533518/wont-boot-black-screen-with-cursor-right-before-windows-logo/
Relevancy 98.04%

Recently, when I start my computer, the Asrock splash screen appears, followed by the pulsating windows logo. Once this is done, it moves on to a black screen with only the cursor visible. The cursor is movable but no key commands seem to do anything. Eventually the desktop appears but it can take up to two minutes and seems to be getting longer every time. I was also looking at my event log and found this entry: "The Religious Religion service failed to start due to the following error:
The system cannot find the file specified." I'm not very knowledgeable on the subject but "The Religious Religion service" sounds a lot like a virus. I'm not sure if these two things are connected, and an AV scan has turned up negative. Thanks for any help.

http://www.sevenforums.com/performance-maintenance/386626-black-screen-cursor-after-windows-logo-takes-time-fully-start.html
Relevancy 97.18%

Hello Our trusty ol laptop Sony Vaio VPCCW FD refuses to load windows home premium bit original install since purchase I get stuck right after the starting windows logo at a black screen with a moveable cursor Strange thing is that I can plug the hdmi output to the TV and I can move the cursor around on the tv as well and the display off on physical button also functions normally all the same in safe mode with without networking and normal This happened when I tried to optional update the Nvidia video card won't moveable cursor boot, windows laptop starting Vaio black after logo screen with through windows update by itself Mid-install it failed and displayed a message something like reverting to previous graphics controller and then reboot now later showed up and it has not boot up since I think it s just stuck mid-boot at the graphics driver part but I don t know how to fix it without doing a clean install which is last resort System restore seems to have lost all its restore points even though i remember seeing creating restore point in the beginning of the update and the recovery partition will only do a clean install - no repair options there either I then burned the win HP x iso and tried to do a repair options from disk with no results Vaio laptop won't boot, black screen with moveable cursor after starting windows logo Thinking back to the XP days I proceeded to try a non-destructive Vaio laptop won't boot, black screen with moveable cursor after starting windows logo install on top of existing OS from the disk but it then says that the upgrade can only be started from within a functional windows and the only option is custom install which wipes everything wtf talk about taking a step backwards Running out of options got windows PE to copy drive contents to external usb but many folders kept asking for passwords so then got an Ubuntu live dvd and everything is backed up and i can type this forum post now Did lots of reading over the past few weeks and tried many things from scanning hardware and memory fixing MBRs and other command prompt things and ended up here where I see people are getting back into windows using FRST and some great help from the Guys here Ran the FRST from usb and here s the txt it generated amp Scan result of Farbar Recovery Scan Tool FRST txt x Version - - Ran by SYSTEM on MININT-H AGV on - - Running from G Windows Home Premium X OS Language English US Internet Explorer Version Boot Mode Recovery The current controlset is ControlSet ATTENTION gt If the system is bootable FRST could be run from normal or Safe mode to create a complete log The only official download link for FRST Download link for -Bit version http www bleepingcomputer com download farbar-recovery-scan-tool dl Download link for -Bit Version http www bleepingcomputer com download farbar-recovery-scan-tool dl Download link from any site other than Bleeping Computer is unpermitted or outdated See tutorial for FRST http www geekstogo com forum topic -frst-tutorial-how-to-use-farbar-recovery-scan-tool Registry Whitelisted HKLM Run RtHDVCpl - C Program Files Realtek Audio HDA RAVCpl exe - - Realtek Semiconductor HKLM Run Skytel - C Program Files Realtek Audio HDA Skytel exe - - Realtek Semiconductor Corp HKLM Run SynTPEnh - C Program Files Synaptics SynTP SynTPEnh exe - - Synaptics Incorporated HKLM Run IAAnotif - C Program Files x Intel Intel Matrix Storage Manager iaanotif exe - - Intel Corporation HKLM Run IntelliPoint - c Program Files Microsoft IntelliPoint ipoint exe - - Microsoft Corporation HKLM Run MSC - c Program Files Microsoft Security Client msseces exe - - Microsoft Corporation HKLM-x Run SmartWiHelper - C Program Files x Sony SmartWi Connection Utility SmartWiHelper exe - - Sony Electronics Corporation HKLM-x Run ISBMgr exe - C Program Files x Sony ISB Utility ISBMgr exe - - Sony Corporation HKLM-x Run GrooveMonitor - C Program Files x Microsoft Office Office GrooveMonitor exe - - Microsoft Corporation HKLM-x Run APSDaemon... Read more

A:Vaio laptop won't boot, black screen with moveable cursor after starting windows logo

Hi have you fixed this issue or still require assistance??
 

https://forums.techguy.org/threads/vaio-laptop-wont-boot-black-screen-with-moveable-cursor-after-starting-windows-logo.1122248/
Relevancy 92.88%

Hi here is my journey All was good and well until my Windows on another drive gave me an NTOSKRNL EXE error fixed now My Windows booted fine at this point but after entering my password it was stuck on quot logging in quot for quite some time I forced a reboot and then I was stuck in the quot Performing Automatic Repair quot loop I eventually got out of this only to be greeted by a quot BAD SYSTEM CONFIG INFO quot BSOD After replacing files from RegBack I managed to get it to boot but now I just Boot No After Screen Logo Cursor Black see a black screen with no cursor I've tried logging in and I had Chrome Remote Desktop but that didn't work either It's really not okay for Windows to just mess up randomly The NTOSKRNL error from the other drive COULDN'T have caused this problem Please help me out I hate reinstalling so much It's one of the biggest wastes of time

A:Black Screen After Boot Logo No Cursor

Did you try a reset? I think that's your 2nd best option next to reinstallation. It only takes about 15mins to get out of that mess if you have an image backup.

http://www.tenforums.com/general-discussion/41426-black-screen-after-boot-logo-no-cursor.html
Relevancy 92.02%

hey guys i have a problem that i cant seem to solve Im not very good with computers Last night i was doing a repair install of windows xp and i accidentally shut the computer down while it was doing the second half of the repair Yeah stupid i know but i just want to know how to make it work again After that it when i'd reboot it would show the xp logo and then no login screen just black with a white movable cursor Ive tried doing the cd repair again with the same results there is NO safe mode and NO taskmanager just black screens forever I tried fixboot and fixmbr i tried to restore to an earlier date through the repair console I tried every suggestion ive come across mostly from this site and even tried to after screen logo cursor with winxp white black load ubuntu to find my stuff which didnt show up All my things couldnt havebeen deleted that fast right Am i going to have to take my hd out and hook it up to a working computer to rescue my files Thank you in advance

http://www.bleepingcomputer.com/forums/t/518072/black-screen-with-white-cursor-after-winxp-logo/
Relevancy 92.02%

Hi I'm having an issue have been having for the past months - no apparent cause where following the W logo on boot it goes to an all black screen with a cursor that only appears when I move the mouse giving it the appearance of quot blinking quot It stays like this for upwards of - minutes before prompting me with a normal login screen Safe mode does the same except all the corner text that says quot safe mode quot and the cursor flash and you cursor following Black logo with boot minutes - 20+ screen can't do anything whatsoever no matter how long you wait I have no idea what is causing this but I would really like to get it resolved so that when Black screen following boot logo with cursor - 20+ minutes I have to restart for updates or if my computer crashes bsod been happening as of recent I don't have to wait almost half an hour to resume use of the computer I used to turn the computer off every day but I've taken to just locking it and turning off the monitors because of this issue I've been debating the merits of just reinstalling windows entirely updating it entirely along with all drivers and then reinstalling my programs just because of how much of a problem this has become

http://www.eightforums.com/general-support/48607-black-screen-following-boot-logo-cursor-20-minutes.html
Relevancy 91.59%

Hi guys at seven forum again, I am using an ASUS laptop running Windows 7 premium 64. After a virus scan with MBAM and removal of infected files, windows will not load correctly. After windows logo appears, the screen goes black and after i while i can hear the desktop load, but the screen is totally black. Ive been able to boot into safe mode, but i am unable to access device manager (related files may have been removed by mistake with MBAM) to check drivers. I also dont have a back up, or a restore point . Any ideas from the guru's here at sevenforum? All help and responses appreciated. thx.

A:Black screen after windows logo. login audible but not visible.driver?

Hi ... Looks as if the Infection has left your System with a lot of corrupted Files ...

I think your best option would be a Clean Install of Windows ..
Follow the Tutorial below ...
Clean Reinstall - Factory OEM Windows 7

http://www.sevenforums.com/drivers/350327-black-screen-after-windows-logo-login-audible-but-not-visible-driver.html
Relevancy 89.87%

This is my first time posting here Please forgive my ignorance as I'm super with cursor logo Black after upper Dell flashing in corner screen not tech-savvy at all I'm going to try to explain what's going on as best as I can to see if anyone can throw me a bone here I have a Dell Inspiron about years old and it's worked just fine up until yesterday I plugged my Canon camera into the front USB port to Black screen with flashing cursor in upper corner after Dell logo grab some photos off of it when my computer froze I had Black screen with flashing cursor in upper corner after Dell logo to hold down the power button to get it to shut off I restarted and found that after the Dell logo comes up the screen goes black except for a white cursor that flashes in the upper right hand corner This has been going on since last night The only two options it gives me appear during the Dell logo screen when I can hit either F for the boot menu or F for startup menu Once the screen goes black and I see that cursor key punching does nothing I'm not sure if this is worth mentioning but at one point I somehow Black screen with flashing cursor in upper corner after Dell logo found myself at a memory diagnostics menu and it ran and found no errors but then froze at I have no idea how I was able to do that and I can't find it again Sorry if I left out any info Anyone have an idea on what I can do to start troubleshooting

A:Black screen with flashing cursor in upper corner after Dell logo

Have you tried unplugging everything from the computer except for mouse and keyboard?

You may attempt a Startup Repair

Are you able to boot into safe mode? Safe Mode

If you have another computer, you can burn Memtest to a disk and run memory diagnostics.
RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/154393-black-screen-flashing-cursor-upper-corner-after-dell-logo.html
Relevancy 86.43%

Two days ago I deleted something off my laptop that hitmanpro kept picking up as bad which mind you has been happening for awhile which I just ignored But yesterday I decided to delete it it started with an s and was probably an exe and was around or - letters After it was deleted I had to restart my computer so I restart it and it loads normally till after the windows icon goes away which after it goes away it stays black with no cursor So after that I restarted my computer multiple times to see if it'd work and it just doesn't I then go and try to reset my computer to recent time periods which ends with the same result of my laptop unable to go past the windows icon I Stays away goes black Windows logo no with Laptop after cursor also tried to reset my computer completely but with keeping my files with the same result I tried to access safe mode since Laptop Stays black with no cursor after Windows logo goes away some ideas were to change the resolution but it wouldn't come on it'd show a black screen with a flash of a white box then turn completely black afterwards OS Windows Model HP G Notebook Pc Processor Type AMD A - APU with AMD Radeon R Graphics

A:Laptop Stays black with no cursor after Windows logo goes away

Greetings and to BleepingComputer,
My name is xXToffeeXx, but feel free to call me Toffee if it is easier for you. I will be helping you with your malware problems.
 
A few points to cover before we start:
Do not run any tools without being instructed to as this makes my job much harder in trying to figure out what you have done.
Make sure to read my instructions fully before attempting a step.
If you have problems or questions with any of the steps, feel free to ask me. I will be happy to answer any questions you have.
Please follow the topic by clicking on the "Follow this topic" button, and make sure a tick is in the "receive notifications" and is set to "Instantly". Any replies should be made in this topic by clicking the "Reply to this topic" button.
Important information in my posts will often be in bold, make sure to take note of these.
I will attempt to reply as soon as possible, and normally within 24 hours of your reply. If this is not possible or I have a delay then I will let you know.
I will bump a topic after 3 days of no activity, and then will give you another 2 days to reply before a topic is closed. If you need more time than this please let me know.
Let's get going now
==========================
 
Hi LiveALife,FRST Scan from RECOVERY Environment on Vista, 7, and 8:
 On a clean machine, please download Farbar Recovery Scan Tool and save it to a flash drive.Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.
Plug the flashdrive into the infected PC.
If you are using Windows 8 consult How to use the Windows 8 System Recovery Environment Command Prompt to enter System Recovery Command prompt.
If you are using Vista or Windows 7 enter System Recovery Options.

To enter System Recovery Options from the Advanced Boot Options:
Restart the computer.
As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
Use the arrow keys to select the Repair your computer menu item.
Select US as the keyboard language settings, and then click Next.
Select the operating system you want to repair, and then click Next.
Select your user account an click Next.
Note: In case you can not enter System Recovery Options by using F8 method, you can use Windows installation disc, or make a repair disc. Any Windows installation disc or a repair disc made on another computer can be used.
To make a repair disk on Windows 7 consult: http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html
 
 To enter System Recovery Options by using Windows installation disc:
Insert the installation disc.
Restart your computer.
If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.
Click Repair your computer.
Select US as the keyboard language settings, and then click Next.
Select the operating system you want to repair, and then click Next.
Select your user account and click Next.
==========
 On the System Recovery Options menu you will get the following options:
 Startup Repair
System Restore
Windows Complete PC Restore
Windows Memory Diagnostic Tool
Command Prompt
 Select Command Prompt
 ==========
 
 Once in the Command Prompt:
In the command window type in notepad and press Enter.
The notepad opens. Under File menu select Open.
Select "Computer" and find your flash drive letter and close the notepad.
In the command window type e:\frst (for x64 bit version type e:\frst64) and press EnterNote: Replace letter e with the drive letter of your flash drive.
The tool will start to run.
When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.
xXToffeeXx~

http://www.bleepingcomputer.com/forums/t/590914/laptop-stays-black-with-no-cursor-after-windows-logo-goes-away/
Relevancy 79.12%

I'm stuck I have a Windows Pro machine that boots to a black screen with a cursor instead of the login hd3000 w/ reinstalling driver? Black cursor at screen login-Improperly prompt though if I tap some keys like enter and tab I'll get some blue squares where probably windows are appearing I can Black screen w/ cursor at login-Improperly reinstalling hd3000 driver? boot to safe mode and log in I can then disable or uninstall the video adapter and boot into the normal Windows But if I install the Intel drivers for the HD integrated video the black screen will be there waiting for me when I reboot I've tried with and without external monitors connected I've tried uninstalling the drivers from the programs and features menu also selecting to completely remove the drivers and I've uninstalled them through the device manager I then reboot before installing the Intel drivers again I've tried the version on Panasonic's website as well as the latest version from Intel's website Results have been the same every time Are there registry keys left behind somewhere that I could try deleting Perhaps some more thorough method of removal Something more creative All ideas welcome System specs Panasonic Toughbook CF A Windows Pro bit Intel M CPU w HD integrated video GB RAM This system has just been restored to a standard corporate image so it's unfortunately as close to factory as it is going to get System restore won't be an option since it has never been in a working state Startup repair hasn't been an option due to the corporate full disk encryption that seems to make the disk unreadable at that point I've tried but it fails and I can't find any drivers to use in the recovery environment for this BeCrypt Disk Encryption

http://www.sevenforums.com/drivers/401780-black-screen-w-cursor-login-improperly-reinstalling-hd3000-driver.html
Relevancy 77.83%

When I try to start Windows normally, a BSoD tells me to run chkdsk /f which I can't do because when I try to launch startup repair, it loads and then just shows me a black screen and a slightly larger than usual cursor which I can move. Running in Safe Mode also gives me the same BSoD. I tried booting my Windows installation disc but I still get the same black screen and movable cursor. I have minor experience with fixing startup problems but sadly, I have no idea of how to fix this. I will be happy to provide any information needed. Reformatting is not an option because my really important projects are there and I can never recreate them. Salvaging my data is not really an option because I don't have external hard drives or anywhere to put them. Please help!

A:BSoD and black screen with cursor problems

I'm sure you've already copied and pasted your question here...

BSoD, black screen with cursor Windows 7 - Cursor - Laptops & Notebooks

I wouldn't recommend asking the same question on multiple forums as you can get completely different answers.
I was going to post there but we'll stick to this one.

To get started follow the Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/334514-bsod-black-screen-cursor-problems.html
Relevancy 76.97%

Hello,
 
I am encountering an issue of when the Dell optiplex 755 boots up, it boots through the Windows XP logo just fine, once it tries to transition between the logo and loading the system up, it just shows a black screen and nothing else happens. I tried using a bootable Windows XP flash drive to repair the system files and it loads the Windows XP setup ok but when it runs through all of the commands on the bottom of the screen and the last one says "Starting Windows" , it takes me to a blue screen (screenshot below). I have HIRENS and have done a lot of the chkdsk commands to fix the files and everything comes back ok. I tried to clone the hard drive with the same exact hard drive and still the same issue. Any suggestions would be much appreciated. Thanks for your help in advance.
 
 

A:Windows XP gets past the logo screen and then turns the screen black/bluescreen

http://www.dell.com/support/article/us/en/19/SLN130053/EN#Error , scroll down to section on STOP 7B errors.
 
Louis

http://www.bleepingcomputer.com/forums/t/586463/windows-xp-gets-past-the-logo-screen-and-then-turns-the-screen-blackbluescreen/
Relevancy 76.97%

Hello guys I have an Intel motherboard when I connect vga cable to interragded vga of pc there's no problem but when I install my graphic card and connect vga cable to it the screen turn to black after windows 7 logo
So what should I do to fix this ?
And thanks

A:Black screen after windows logo

Try loading defaults in BIOS. And then try disabling on-board from BIOS.

Can you get the mouse to that screen? Try moving mouse to extreme right and then left.
Possible the logon screen is still on the now not-attached display.

http://www.sevenforums.com/graphic-cards/374510-black-screen-after-windows-logo.html
Relevancy 76.97%

Hi i get black screen after i updated my gfx drivers wenn i went windows 7, it worked on vista if i didnt updated driver 4 gfx got a 8800gts tryed to update bios and still didnt worked dont now what to plz help

A:Black screen after windows logo

I suggest a system restore to get to a point before the troubles began. You may have to boot from the Windows DVD or repair disc to do so.

http://www.sevenforums.com/graphic-cards/93897-black-screen-after-windows-logo.html
Relevancy 76.97%

Hello,
So recently I formatted my laptop and installed graphic drivers, once I do and restart, after windows starting thing, the screen goes black. Only when i go to safe mode and disable 1 graphic druver it works.
My graphic drivers are AMD and Intel. Now I installed Intel, and its fine, but when I install AMD, after restart screen goes black. Please help me
My specs:-http://i.imgur.com/tZG4pJu.png

http://www.sevenforums.com/general-discussion/380458-screen-goes-black-after-windows-logo.html
Relevancy 76.97%

Hello everyone I HELP!!! windows Please logo. after screen Black seem to have a problem with my vga at least thats what i think it is from reading many other posts I have just got a new mobo which was working fine until the other day when it started taking a good mins to load up So i tried to repair xp and then it would stop with mins remaining i managed to get around this problem by starting set up in debugging mode As always it created another problem with my services and dhcp would not start so i took the drastic action of backing up my stuff Black screen after windows logo. Please HELP!!! using crappy files amp settings transfer wizard After that i done a full format and re-installed xp It resolved the problems with the services not Black screen after windows logo. Please HELP!!! starting the display was looking fine But yet again it created another problem i tried to transfer my files amp settings which would work but the display would be very patchy like with no icons in start menu or Black screen after windows logo. Please HELP!!! my documents i downloaded the latest driver for my graphics card ATI Radeon and installed it which seemed to install ok as there were no error messages Re-started the pc hoping it would sort the display out but instead it would load the windows logo with the progress bar and then when i should be seeing the welcome screen it just goes blank with only the mouse cursor visble my hdd led is on and appears to be loading stuff but no matter how long i leave it it will not show anything As the mobo has onboard graphics i removed my ati card and tried with the on board display and still getting the same problem i have tried booting in safe mode vga mode debugging mode and last known config but still it does nothing i have also tried doing a chkdsk using recovery console and it freezes at I am currently trying another repair but i dont hold out much hope if anyone can help me i would really appriecate it as i am very tempted to throw the damn thing out of the window Thanks in advance nbsp

A:Black screen after windows logo. Please HELP!!!

what are the temps in the bios, pls list full computer specs here
 

https://forums.techguy.org/threads/black-screen-after-windows-logo-please-help.534314/
Relevancy 76.97%

In system restore there is two users but i don't know the passwords i never get one to begin with.

Black screen after logo

please help

http://www.eightforums.com/performance-maintenance/75846-windows-8-1-black-screen-after-logo.html
Relevancy 76.97%

Hello today i was working on the PC when the power with Black windows screen logo got down for a second i started the pc and the power blinked again so i just waited mins or so and i turned on the Black screen with windows logo pc again but this time it only got to the color balls that form the windows logo showed the quot please wait quot message with a black background to finally led me to a black screen with the windows ultimate logo on the bottom center a button with some accesibility options to the Black screen with windows logo left Black screen with windows logo and the red button to turn off and reset the machine i cant do anything more Ctrl Alt Supr doesn't work or the windows key R starting in safe mode doesn't change anything neither my specs are Intel core duo ghz gb RAM GB HDD geForce gt PS i didn't install or configure anything before the second time the power got down and after the first one the pc started fine

A:Black screen with windows logo

Anyone? please i need help!

http://www.sevenforums.com/general-discussion/210247-black-screen-windows-logo.html
Relevancy 76.97%

I'm not getting the blue screen of death anymore, just a black screen after the windows logo. Any ideas?

Thanks in advance?

- Eternally Pierced​
 

A:Black Screen After Windows Logo

Try safemode to determine if windows is loading or not.
If it is, set bios to default values and disconnect everything except the video card and bootdrive.
If that solves it, connect things one at a time.

If windows doesn't load, reste bios and try again.
 

https://forums.techguy.org/threads/black-screen-after-windows-logo.760006/
Relevancy 76.97%

Hi there
My xp PC won't boot up. It gets as far as the Windows logo and then goes black and stays there. If I force a shutdown by holding down the power button I can boot up in safe-mode, or I can choose the option to boot using the last known good configuration, in which case everything works normally until I shut-down and restart again.

I tried a diagnostic startup but no improvement.

I've done a full virus scan.

I downloaded a copy of HDHacker and backed up the boot records with a view to running FIXMBR. But first I wanted to check with someone who knows what they're doing that this would be a good idea, and that I might be on the right track, or suggest a better option

Thanks in advance

A:Black screen after windows logo

How long would you typically wait? Try letting it sit for an hour at the black screen. Also, does ctrl+alt+del work or do you see a mouse cursor?

If that is the only account you have, try making a new temporary one and see if that will change anything.

You can also try running Process Monitor to provide us a log of the boot-up proces. There is an option to have it run at boot-up to record boot process. You'll need to set it up for this, which can be done by:

1. First, go to File then Backing Files... and instead of having it use pagefile have it log everything directly to an actual file. Name it as you wish in the directory you want.

2. Go to Options then Enable Boot Logging.

Restart the computer and let it boot up normally. Let it sit at the black screen for a bit. If you do not hear your PC chugging at all or see the disk activity light on the front of the PC flashing, then restart then go back into safe mode and open up the file with Process Monitor. Go to file then Save As and save it as another file (default options are ok), zip it up and send it to us.

http://www.techsupportforum.com/forums/f299/black-screen-after-windows-logo-598871.html
Relevancy 76.97%

Hello everybody. I am a newbie at this so please give me some credit i have recently installed Kaspersky Internet Security 2010 on my XP machine. Prior to this, I uninstalled other antivirus programs (avast!, ad-aware, nod32). After installing Kaspersky and updating the virus list, the software demanded the machine to be restarted. So i did. After the Windows logo now, the screen goes black. I tried to restore to a previous checkpoint but nothing happend. Any ideas?

PS try to keep your reply, if any, free of difficult technical terms. i would appriciate it

A:Black Screen after windows logo

Hello PavlosCy

What happened when you tried System Restore? Did you get an error message?
Did you try it in the following way?

Boot into Safe Mode Options Screen (the one with Last Known Good Configuration on it) by pressing F8 at bootup and choose
'Safe mode with command prompt'

At the command prompt type
C:\Windows\system32\restore\rstrui.exe

Hopefully this will open System Restore, so restore to before the problem started
http://bertk.mvps.org/

If it still won`t work try the following
Configure your PC to boot from CD if it isn't already set up that way. You may need to enter the BIOS to configure the PC to boot from the CD.
Set the boot order to
Floppy (if present)
CDROM
Hard Disk
SAVE and EXIT

Start your PC with the XP Setup CD in the drive. When you see the "Press any key to boot from CD..." prompt, do so and let the CD-based boot process begin.

When the Recovery Console option is offered ("Press R to start the Recovery Console"), do so. You may be asked which Windows installation to enter, in which case type the number of the Windows installation you wish to work on (usually "1").

When prompted, enter the Administrator's password for that Windows installation. If you did not set a password just press ENTER

At the command prompt, type
Bootcfg /Rebuild
ENTER

The exact wording will depend on your setup, but after a few moments you'll see a prompt that says something like:
Total Identified Windows Installs: 1
[1] C:\Windows
Add Installation To Boot List?

Assuming the information you see is correct, enter
Y
Bootcfg will start the process of rebuilding the boot list to include the indicated Windows installation

After a moment, you'll be asked to "Enter Load Identifier."
This is the name of the operating system that will appear in boot menus.
Type
Microsoft Windows XP Professional
or
Microsoft Windows XP Home Edition
(whichever your system is)
ENTER
Next you'll be asked to "Enter OS Load Options."
For normal installations, enter
/Fastdetect
ENTER

Type
Exit
to leave the Recovery Console and reboot the PC

.

http://www.techsupportforum.com/forums/f10/black-screen-after-windows-logo-471000.html
Relevancy 76.97%

So, my girlfriends laptop takes AGES to boot, but it boots fine in safe mode, which rules out the possibility of the HDD failing. It goes to the Windows logo, then goes black, the mouse works fine - you can see it moving about but it doesn't go further than that, no sounds are made etc..

Things I've tried:

-chkdsk
-bootrec.exe /fixmbr & /fixboot
-last known config
-sfc
-tons of spyware/malware removal etc
-sifted through the Windows folder for any weird/unrecognizable files
-turned almost everything off in the msconfig startup tab

I reallllly want to avoid re-formatting but if that's the only option left then it'll have to be done!

Anything else I can try?

Thanks!

A:Black Screen After Windows 7 Logo?

What make and model is her laptop?
Are all the drivers up to date. Check in Device Manager for warnings.
What OS is your girlfriends computer running?
Have you tried disabling all items in msconfig?

http://www.techsupportforum.com/forums/f217/black-screen-after-windows-7-logo-557859.html
Relevancy 76.97%

Hi all Yesterday I installed Windows pro on my system and everything went fine and I installed all programs screen logo after Black windows I usually use and last thing I installed was net framework Black screen after windows logo if I remember correctly PC was rebooted once or twice before all this to apply all previous installs updates and drivers etc After next reboot immediately after windows logo just when it needs to log in to account screen goes black - sometimes there's a cursor visible but mostly not I had to do several reboots via case button until it booted normally into windows Note - everything seems to work Black screen after windows logo fine as system fans and components are working If black screen happens I have no way to enter safe mode F doesn't work I can just reboot through case button I've searched solutions on microsoft site and also Black screen after windows logo googled and it seems it's a frequent problem After researching a bit I went into event viewer-windows logs-system and there is a consistent set of errors showing First I get yellow triangle warning saying amp amp quot The time service has set the time with offset xxxxxx seconds amp amp quot It's followed with some normal notifications and then errors which say system was shut down unexpectedly as I hard rebooted it Today when I managed to log in after several reboots I noticed it said time was am even though it was actually It fixed itself automatically as I saw after some minute There were some other yellow triangles at Event viewer-windows logs-application and several programs like explorer exe mmc exe AMD ATI ACE Core-Static CCC exe AMD ATI ACE Core-Static MOM exe wuauclt exe Realtek Audio HDA RAVCpl exe rainmeter exe skydrive exe dwm exe taskhostex exe etc report this error cannot be restarted - Application SID does not match Conductor SID I had same windows version same hardware and all those programs installed before and never had this now I'm lucky to get windows to show Only thing I remember installing differently was newer version of amd CCC drivers Had before and now I have version Please advise me what to do

A:Black screen after windows logo

edit - deleted this post as I fixed formatting error.

http://www.techsupportforum.com/forums/f320/black-screen-after-windows-logo-992217.html
Relevancy 76.97%

Hi all.

I'am running windows 7 professional. When i boot the PC, i have no trouble up to the point of the windows logo. When this disappears my screen (SyncMaster 913n) keep displaying the text "optimal screen resolution is 1280x1024 60 hertz" and then i dont see anything else than that. Even if i change the screen resolution to 800x600 i get the message.

My GFX is 8800 Geforce GT with the drivers 285.62 (64Bit) same issue.
Everything was working fine earlier today, then after a reboot i got this issue.

The computer is a clean re-install so can their be missing some drivers besides the GT 8800 that can make the problem?

Thanks on advance.

Edit.
I'am currently trying to download the SP1 and will install this to see if this will solve anything, but i have my doubts.

A:black screen after windows logo

Question if I may.
What did you do, or what happened immediately before you rebooted ?
This could be very relevant.

http://www.sevenforums.com/drivers/198134-black-screen-after-windows-logo.html
Relevancy 76.97%

Here we go My laptop is hp-dv - tx with ATI and intel hd switchable graphics Recently my laptop started giving me a black screen after the windows logo I was having some issues with my GPUs too Issues with GPU Sometimes my ATI card was not coming up in the device manager and i was only using intel HD i have noticed that when that happens i can't see my the Black screen after windows logo. laptop charging icon changes to plugged in mode even though i plug in the charger but the laptop was of course charging perfectly But recently i found my ATI card back in device manager and it was working pretty well But after exactly a week I started getting some white lines appearing in the display too Issue of black screen With that knowledge i assumed Black screen after the windows logo. that the black screen issue is a counter-product of the GPU issue Black screen after the windows logo. I used safemode to uninstall all the GPU drivers Then i can log into windows and work normally and windows detects the GPUs and install the plug and play drivers After they install it i can restart the pc and work normally But once a shut this down and later when i try to switch it on i get the black screen issue from ground zero that makes me believe that this is mere a software issue But those white lines i mentioned about is due to hardware fault i guess I don't know what to do right now I don't want ATI graphics intel HD is ok i just want to switch this thing on and do my work coz i can't afford another laptop right now Please help me to resolve this issue Thank you in advance

A:Black screen after the windows logo.

Hello and welcome Schintoff now I am no expert by any stretch but you could try and run a scannow as a first step

SFC /SCANNOW Command - System File Checker

http://www.sevenforums.com/graphic-cards/277558-black-screen-after-windows-logo.html
Relevancy 76.97%

I am trying to install a new operating system. I have Windows XP Professional on one partition, I deleted it to install Windows XP Essential. When the CD asks me to reboot the PC so it can finish the installation the screen goes black. Now after a while I get a blue screen saying that Windows XP is checking a disk for consistancy. When it finishes the screen freezes and nothing else happens.

Relevancy 76.97%

Every time I turn on my computer I logo screen Black after Windows get a hanging black screen and sometimes the BSOD Just now I turned it on waited for the black screen for some time then pressed ctrl alt del and got a bsod some secs after that Now it has performed the startup repair the problem details are as follows problem event name StartupRepairOffline Problem Signature Problem Signature Problem Black screen after Windows logo Signature unknown Problem Signature Problem Signature AutoFailover Problem Signature Problem Signature XF OS Version Locale ID It says that the Startup Repair cannot repair the computer automatically Help really appreciated Oh and I can turn it on in safe mode EDIT It appears that I cannot get into safe mode either although previously I could have I get the BSOD even when I try to boot in safe mode The last file it tries to load in safe mode is avgidshx sys then I get a black screen OMG i got to the welcome screen just now safe mode with command prompt

A:Black screen after Windows logo

The sfc /scannow command scans all protected system files and replaces corrupted and incorrect versions with correct Microsoft versions.
 
In Safe Mode with Command Prompt type in cmd in the Search programs and files.cmd will appear in Programs above, right click on it, then click on Run as administrator.   
If you are prompted for an administrator password or for a confirmation, enter the password, or click Allow.  
A page similar to the one below will open.
Type in sfc /scannow and then press Enter to start the scan.

http://www.bleepingcomputer.com/forums/t/491166/black-screen-after-windows-logo/
Relevancy 76.97%

Hey guys,

Yesterday I was trying to install newer AMD drivers of all sorts of stuff, and it was bugging me because it was really difficult to install and was always stuck at "Installing AMD Display Driver". I tried to find fixes and people told me to use DDU (Display Driver Uninstaller) to uninstall my drivers then install the new ones, but DDU wasn't working for me so I ended up manually uninstalling my drivers through Device Manager. Nothing happened but I still couldn't install my new drivers, so I eventually just shut off my laptop. Today, I turned it on and after the Windows logo, I just got a black screen and it just sat there forever until I forcefully shut it off. I'm guessing something happened to my graphics drivers while installing/uninstalling my drivers yesterday. Any ideas how to fix this?

Thanks, Mark

EDIT: I can't boot into Safe Mode either, same result :/

A:Black screen after Windows Logo

I used my Windows 8 installation disk to do a system restore, and thankfully DDU did actually make a restore point even though it wasn't functioning! Though it did say the system restore failed due to an error, after I pressed ok to the message, it randomly restarted the computer and normally booted into Windows 8, and said 'System Restore completed successfully.' Phew!

http://www.eightforums.com/drivers-hardware/67373-black-screen-after-windows-logo.html
Relevancy 76.97%

Hello Basically my Black Logo After Windows Screen laptop was working fine last night I turn it on this morning and after the windows logo appears the screen goes black However i can see and move the mouse cursor still I tried pressing f at the beginning of the start up and tred to repair my problem using the windows repair features but it didn't work annoyingly i forgot to set a restore point as well so i can't try that When Black Screen After Windows Logo i go into safe mode the exact same thing happens but with the mouse being slightly more pixelated and blocky I've got a Windows Premium bit disk which i purchased from Windows but when i load that up it tells me that to install it i need to log into windows which i obviously can't I'm using a HP G - EM i've had it for just over months Annoyingly exactly a week after the warranty is void and like i mentioned i've been using Windows premium bit for the past months Thankyou in advance

A:Black Screen After Windows Logo

The loading of drivers and programs continue after the logo screen, so I would guess that one of them is delaying the boot during the "black" phase. Go into msconfig and disable everything on the Startup tab, after selecting the Selective startup on the General tab. If that makes a difference, then reenable the startup items one at a time, until you have pinpointed the problem. There are startup items that are not listed in msconfig, so you might find it useful to try using StartupCPL, which is freeware that you can download.

http://www.sevenforums.com/general-discussion/55146-black-screen-after-windows-logo.html
Relevancy 76.97%

My mom's computer has Windows XP, and I have been searching all over the internet for a solution to the problem she is having, I have got nothing so far.

The computer gets to the Windows loading screen, and will go to a black screen. It will not boot in any modes, safe mode, vga mode, last known good configuration. Nothing works. When I try loading it in safe mode It will start running down the file list and stop at one (C:\windows\system32\mup.sys).

I tried to go to repair with the disk and tried the chkdsk /r and it said it found one or more volume errors but were corrected, but it didn't help the problem.

I really don't know if anything was happening odd before or after this happened because it is my mom's computer and she just says it was normal up to now. Any info you guys have is appreciated.

Thanks,
Ashley

A:Black Screen After Windows Logo

If you have a XP CD for this computer you follow this to repair your XP.

http://www.microsoft.com/windowsxp/u...nostart.mspx#6

http://www.techsupportforum.com/forums/f10/black-screen-after-windows-logo-505046.html
Relevancy 76.97%

I have a Dell Inspiron 1545. Just took it out of the box, it comes loaded with Windows Vista. When i started it up it booted really fast all the way up until the round windows logo with the little sound, then the screen goes black and just sits there for about 3 minutes with the mouse showing, and then it finished loading like normal.

I can't seem to figure out whats causing it. Any ideas?
 

A:Screen goes black after Windows Logo

it is checking the system components at that time.
One of them isn't answering but it knows it is there so it keeps trying.
If u just got it, call Dell.
u can check ur device manager to see if there is anything showing a problem or not listed that should be.
 

https://forums.techguy.org/threads/screen-goes-black-after-windows-logo.850186/
Relevancy 76.97%

When I turn on the computer, I get to the windows logo screen and then my monitor light flicks off and on for a second and the screen goes black with just the white arrow cursor. This started after two attempts at repairing windows earlier today when it refused to boot up past the logo screen. After about 15 minutes, the "windows is starting" screen comes up and then the "Welcome" screen. After that it hangs up. I have tried booting in safe mode, vga mode, hit my head on the wall mode and nothing works. I tried searching online, but can't find a solution that works for this scenario.

I would appreciate any help you can give me!
 

A:Black screen after windows logo

try a full install of windows xp. you said you tried repairing.. i would say it is time tor reinstall then.

wipe it clean and start over
 

http://www.techspot.com/community/topics/black-screen-after-windows-logo.30419/
Relevancy 76.97%

Howdy friends My PC specs ASUS M A L-M USB Mobo AMD FX CPU after windows screen Black logo Corsair Vengeance GB DDR Crucial MX - GB SSD Seagate GB GB HDD ATI Radeon HD GB GPU Cooler Master W PSU So today morning when I turned on my computer after the windows logo the screen went black No cursor nothing I have not added any hardware to my PC recently I tried logging into Safe Mode and was able to do so I did a system restore and then Black screen after windows logo was able Black screen after windows logo to boot without any issues However when I restarted it again got stuck post that Windows Logo screen I uninstalled my display driver and was able to login normally After the driver installed on it's own I restarted and it got stuck again Then I unplugged the VGA cable from my PCI GPU and plugged it into my onboard graphics port I changed the primary graphics adapter in the BIOS and was able to login without Black screen after windows logo any issues I downloaded the onboard graphics driver from ASUS website AMD Catalyst and when I restarted I got a BSOD and it went into a loop of restarting gt BSOD gt restart I have attempted startup repair system restore but nothing seems to work I can however intermittently login without any problem But out of times I am getting stuck past the Windows Logo screen Logs from event viewer - The DHCP Client service depends on the Ancillary Function Driver for Winsock service which failed to start because of the following error A device attached to the system is not functioning ------------------------------------------------------------- The DNS Client service depends on the NetIO Legacy TDI Support Driver service which failed to start because of the following error A device attached to the system is not functioning ----------------------------------------------------------------- The TCP IP NetBIOS Helper service depends on the Ancillary Function Driver for Winsock service which failed to start because of the following error A device attached to the system is not functioning ------------------------------------------------------------------------ The Network Store Interface Service service depends on the NSI proxy service driver service which failed to start because of the following error A device attached to the system is not functioning ------------------------------------------------------------------- The Network Location Awareness service depends on the Network Store Interface Service service which failed to start because of the following error The dependency service or group failed to start ----------------------------------------------------------------- The Workstation service depends on the Network Store Interface Service service which failed to start because of the following error The dependency service or group failed to start ----------------------------------------------------------------- Event filter with query quot SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA quot Win Processor quot AND TargetInstance LoadPercentage gt quot could not be reactivated in namespace quot root CIMV quot because of error x Events cannot be delivered through this filter until the problem is corrected --------------------------------------------------------------- DCOM got error quot quot attempting to start the service WSearch with arguments quot quot in order to run the server D C F-AC - F F-BEB - C C CE -------------------------------------------------------------- The following boot-start or system-start driver s failed to load aswKbd aswRvrt aswSnx aswSP aswVmm discache ESProtectionDriver spldr Wanarpv ------------------------------------------------------------------------- The server AD EDBCA- - B- E -C D B E C did not register with DCOM within the required timeout ---------------------------------------------------------------------------------- Display driver amdkmdap stopped responding and has successfully recovered ------------------------------------------------------... Read more

http://www.sevenforums.com/performance-maintenance/401880-black-screen-after-windows-logo.html
Relevancy 76.97%

Hello I usually don t ask for help as I seem to get most of the issues fixed myself but this one is over my head To begin with these Logo Screen Black Windows After XP are my specs Motherboard ASUS M N rev g Processor AMD Athlon LE- MHz HDD WD Caviar Blue Gb Power Supply Delux W Graphic Card Nvidia GeForce LE M RAM DDR- MHz Kingston Now Windows XP Black Screen After Logo Friday there was the cleaning lady in the office and unplugged the PC while it was started I left it like that until Monday and in the morning it didn t start It starts normally Windows logo appears it is loading and after that it hangs on a black screen with no mouse cursor I tried - Replacing RAM - Replacing Power Supply - Replacing Video Card - Install Repair of Windows XP with Original Disk - Ran CHKDSK r from recovery console - Tried fixboot fixmbr from recovery console - Scanned The Whole Filesystem with Kaspersky Rescue Disk - I tried replacing the HDD with a new one did a fresh install of windows XP and it works Now I can t afford to lose data so fresh install is not an option It doesn t start in safe mode not in VGA mode not in debugging mode I have resources I just need an idea on what to do from here Please help Thanks nbsp

A:Windows XP Black Screen After Logo

If this is too elementary, let me know... Just not sure how basic you need the help to be.

I doubt all the hardware changes were required.
I suspect you "simply" ended up with a damaged windows installation from the loss of power.
(Hence the advisability of a UPS.)
With any luck you can still recover most of your data...
any files open at the time of power loss are likely damaged.

You have replaced the hard-drive and (re) installed windows on the new drive.

Your old drive is now out of the machine?
Or did you slave it and leave it in the machine?

If it is out of the machine, you can do the same with a USB enclosure for it.

From the new boot disk... boot,
and try to use Window's explorer to look at the old drive: Can you find files?
If so, transfer them to the new drive.
After you transfer your files, you can reinitialize the old hard drive, and...
either install it (for example) as a data-drive,
or use it as a usb drive for back-ups.
 

http://www.techspot.com/community/topics/windows-xp-black-screen-after-logo.154001/
Relevancy 76.97%

now i think some where on this sight some one had asked about this but i cant find it so if they did sorry for the repeat but any way heres the problem

after the windows logo the screen shuts down and goses to sleep i can get in to safe mode and all the way in to windows with out the drivers i have tryed 2-3 diffrent drivers and it has done this with each one the video card is a ati safire (ya i know i cant spell) 9200 .... short of replacing the video card i'm running out of ideas having never seen this problem befor, is this just a bad video card i have made sure that it didint some how get set over that the screen was able to display
 

A:black screen after windows logo

NM figured it out it was a bad GPU messed me up sence this is the first card i seen that had no visual defects from going out
 

http://www.techspot.com/community/topics/black-screen-after-windows-logo.81553/
Relevancy 76.97%

Hi there,

I recently got a blue screen and after turning it back on, I've got a black screen after the windows logo appears. I can move the mouse but that is about it.

Has anyone had this problem or know how the fix it?

It's an Acer E1-571

Thanks

A:Black screen after windows logo

After you get to the stage when you see just the black background and the cursor:

Press 1 (one) time CTR+ALT+DEL
On the Window that opens, select New>Task
On the new Window, navigate into C:\Windows and find explorer.
Select it and click OK.

http://www.pchelpforum.com/windows-7-a/127323-black-screen-after-windows-logo.html
Relevancy 76.97%

Good Morning,

For the past several months I have been having problems with my HP desktop computer. When my system reboots I sometimes get a black screen with nothing on it or it gets stuck on the windows logo or I get a blue screen with a bunch of writing.

The blue screen tends to happen with the computer goes into hibernation. So I changed my settings to that it doesn't happen but I would like to fix that so that I can give my computer a rest during the time that I'm not using it.

I have checked for malware, viruses you name it... nothing.


HP HPE-180t
Windows 7 SP1
Intel core i7 930 @2.80GHz
9.00 GB RAM
Kaspersky Internet Security 2013


If you need further info please let me know. ;)
ps I had wonderful support several years ago regarding my laptop.. thank you once again :)

A:Black screen, Blue Screen & Stuck on Windows logo

Hello Britt,


Quote:




I would like to fix that so that I can give my computer a rest during the time that I'm not using it.




The best way to do this is to simply turn it off; it will also save on the electricty bills too.
When I am not using my machine, I turn it off, because here in South Australia we have the second highest electricity charges in the world.


Quote:




I get a blue screen with a bunch of writing.




Can you tell us what the blue screen says; usually this is due to a recent hardware or software change; however, in your instance it might be the Hibernation feature that is malfunctioning.
Post back with the information about the blue screen, please.

Kind Regards,

http://www.techsupportforum.com/forums/f217/black-screen-blue-screen-and-stuck-on-windows-logo-689187.html
Relevancy 76.97%

Hey need some help yet again Yesterday I downloaded Mission Against Terror New MMOFPS and I downloaded it Upon updating with the patcher my laptop went haywire It started opening up random IE windows slow speed etc etc I did a whole memory scan and a malware adware spyware scan There were several viruses and whatnot but Login screen and BEFORE Screen 7 Windows Black logo/loading! AFTER what is important are the files SVC exe and exe you'll find it why later on The anti-virus said that it had fixed deleted everything So I restarted my laptop hoping that I'd get it up and running in safe mode for any further scans Unfortunately when I restarted it after the windows loading screen which is right before login screen a black screen appeared With nothing at all Not even a cursor BLACK JUST BLACK with NO keyboard access mouse access But that's expected since it's BEFORE the login screen It's the same with normal boot boot that does that quot last best used option quot or whatever safe mode with networking etc etc All the same Black screen Good thing I had Black Screen BEFORE Login screen and AFTER Windows 7 logo/loading! WIN XP on my other hard drive So I booted up into WIN XP where I'm posting this from and did a FULL NOT QUICK system scan to find the SAME Viruses YET AGAIN SVC exe and exe along with some other minor tracking cookies and what-not Win XP on second drive is also having a few problems like IE shutting down every second using firefox now Think this is a whole system prob But why Didn't the antivirus-es fix it I say quot es quot because I used SuperAntiSpyware Norton NOD Malware Bytes and AVG I've tried the system recovery thing F thing on boot screen NOT ON LOGIN SCREEN Remember I can't reach that but that doesn't work either So any suggestions Btw The windows PRO bit that's corrupted not starting is on C and Win XP is on D Attached is a log of my most recent scans Thanks in advance

A:Black Screen BEFORE Login screen and AFTER Windows 7 logo/loading!

Hi your problem can best be addressed in the security section of the forum
http://www.techsupportforum.com/secu...oval-help.html

http://www.techsupportforum.com/forums/f217/black-screen-before-login-screen-and-after-windows-7-logo-loading-516244.html
Relevancy 76.11%

Hello there! I'm having an issue with one of my windows Vista systems. It's a HP computer (blah, I know)... and is several years old. It's issue of late occurs on start-up. After attempting to "Start windows normally", the system will display the load screen then immediately go to a black screen. It doesn't restart... it just stays black. I've tried to go into Safe Mode as well as do a system restore and go to the last known good config. Nothing works. The problem is there is over 200 gb worth of work, school and personal files on this system I need to export to my external hd. After that I don't care what happens to this freakin computer.

If anyone has any advice, I would greatly appreciate it.

Edit: It's a x86 Windows Vista Home Premium OS.

A:Black screen after windows vista logo

Welcome

Please go through this tutorial: Copy & Paste - in Windows Recovery Console

Let us know if it helps

http://www.sevenforums.com/bsod-help-support/271487-black-screen-after-windows-vista-logo.html
Relevancy 76.11%

I did Not install anything or change ANY screen resolution or something, I Just did a Malwarebytes' Anti-Malware scan, I have the virus worm.win32.skynet and i thought Malwarebytes' could get it out, the scan finished and I had to restart my comp, And so i DId and then all of a sudden Booting into Windows Normally had my screen stuck on a black screen after the Windows Logo Displayed, I tried EVERY Safe Mode and it would just pause and stop loading while it was TRYING to get into Safe Mode
I do not have a Laptop, I have a Dell. I cannot really buy anything at the moment.. So PLEASE Help me D:.. Im good with computers but I can't solve this problem and my family is laughing at me thinking I suck now

Thank You,
Luiza
 

A:Computer has a black screen after Windows Logo

Do you have the Dell XP CD that should have come with the computer? If yes, pop it in the tray and set the boot option to CD first and then see if it offers you any options other than taking the system back to the factory settings - that's the one you don't want. If it offers you a Command Prompt, try FIXMBR and FIXBOOT to see if they help.

 

https://forums.techguy.org/threads/computer-has-a-black-screen-after-windows-logo.888715/
Relevancy 76.11%

THIS IS RESOLVED NOW after Sigh, screen windows Black logo. Check my last post if you are at all curious as to the cause Sigh Black screen Sigh, Black screen after windows logo. after windows logo ------------------------------------------------------------------------------------ Hey all first of all sorry if this is in the wrong forum I don't know what exactly is causing the issue so I am not sure yet where to place this post So last night I turned off my PC as usual Rebooted it this morning and every time the Windows Logo disappears all I Sigh, Black screen after windows logo. see is a black screen no mouse pointer cant bring up task manager the pc seems unresponsive I am currently running the PC in safe mode There are other threads on the forums and on google I have tried everything so far As a list for you this is what I have tried Windows Restore Windows Repair Reinstalling Windows will not allow me to do so from safe mode Booting Windows in low resolution mode Booting windows from the Win CD I made this causes me to get past the windows logo then all I see is a mouse pointer Sigh, Black screen after windows logo. and a windows background Using winkey P does nothing I have GeForce GX s - I use displays normally occasionally using a third The machine was running fine last night and no new software has been installed for the past days I assume the issue is multi-display related however the pc is totally non responsive after the windows logo which suggests something else I am totally at a loss and need this PC for my work I work from home in Austria for several companies in other countries I have been at this since about am and hours later there has been no change

A:Sigh, Black screen after windows logo.

Have you tried only running with one video card and monitor and seeing if you can get it to work properly like that? I'm not sure what the next step after that would be but that would seem like a good place to start. And if it worked, at least you'd have better access to your system back and perhaps you could start adding things back to try to isolate what exactly is causing the problems.

http://www.sevenforums.com/graphic-cards/35060-sigh-black-screen-after-windows-logo.html
Relevancy 76.11%

Hello there! I'm having an issue with one of my windows Vista systems. It's a HP computer (blah, I know)... and is several years old. It's issue of late occurs on start-up. After attempting to "Start windows normally", the system will display the load screen then immediately go to a black screen. It doesn't restart... it just stays black. I've tried to go into Safe Mode as well as do a system restore and go to the last known good config. Nothing works. The problem is there is over 200 gb worth of work, school and personal files on this system I need to export to my external hd. After that I don't care what happens to this freakin computer.

If anyone has any advice, I would greatly appreciate it.

Edit: It's a x86 Windows Vista Home Premium OS.

A:Black screen after windows vista logo

Try booting from your CD and choose repair..

http://www.vistax64.com/crashes-debugging/299210-black-screen-after-windows-vista-logo.html
Relevancy 76.11%

A black screen keeps coming on after the windows startup logo. When I disable my IntelhHD graphic driver everything goes normal, but with it it won't let me use regular mode except safe mode.
It would be grateful if you guys could help me.

http://www.sevenforums.com/drivers/380178-black-screen-after-windows-startup-logo.html
Relevancy 76.11%

Hello,

I recently installed drivers for my tascam us-144 on laptop running Windows 8.1. It worked for a while but sometimes the screen freezes and I have to do a hard reset. It would boot back on, but it would still randomly freeze and I would have to do another hard reset.

Just last night, when it froze again, I did another hard reset but now it just shows a black screen after the boot logo. I think it was the tascam drivers that messed it up, but when I try to go into safe mode to remove it, it still does the same thing.

Any help?
(Sorry if I posted in the wrong board.)

http://www.eightforums.com/general-support/41936-i-get-black-screen-after-boot-logo-windows-8-1-a.html
Relevancy 76.11%

my screen also goes blank after the windows logo display, i have tried restarting, starting in safe mode and the monitor continues to remain black after the windows logo. When i restart in safe mode my computer shows files in ms dos and appears to crash. I changed my display settings and can't get back on to my normal desktop. i cannot get back on to change my settings. i have also tried to start at last known save point and this neither doesn't work. I went into bios and switched my display adapter to the onboard card, still no luck. I don't think there is a motherboard problem like my last comp, but I can't logon to switch the display settings, once I get to the logon on screen, my display goes black. cheers 4 help.

System:
xp pro
celeronD 3.3ghz
512mb ram
100gb hd
(video card) radeon9200 128mb

A:Windows Logo Shows Then Screen Goes Black

Can you get into Safe Mode? To do this, try tapping the F8 key repeatedly just before the Windows splash screen shows up.

http://www.bleepingcomputer.com/forums/t/155874/windows-logo-shows-then-screen-goes-black/
Relevancy 76.11%

My desktop will load up to the windows logo and then go to a black screen. I believe it is a driver issue but I cannot get into windows to update them.
Things I have tried myself to resolve this issue.
- Use different VGA cable
- Use my onboard GPU to load into windows (problem persists)
- Load in through safe mode, on two different monitors (get message: input timing error)
Anybody ever deal with this? I can't seem to find any other options.
 

A:Load up to windows logo and then black screen

What hardware? Make make/model? what's the os?

Thanks, and welcome.

v
 

https://forums.techguy.org/threads/load-up-to-windows-logo-and-then-black-screen.1143635/
Relevancy 76.11%

I have a problem booting Windows 7, after I press power button, it gets to the first (OEM) screen, then after it just goes black and stays like that forever. If I press ctrl+alt+del while it's black, it just restarts and same thing happens again. I tried booting from Windows 7 DVD, and using system recovery/repair but it doesnt help. I also made a new boot record using bcdedit commands in recovery console but it still won't work. What can I do?
 

A:Can't boot Windows 7, black screen before logo

hi
you using physical maching , or try this OS as vm ?
i beleive this case caused by improper graphic Card .

did your machine face microsft prerequirties or recommended specifications .

http://msdn.microsoft.com/en-us/evalcenter/dd353271.aspx
Regards
Youda Martziano
 

https://forums.techguy.org/threads/cant-boot-windows-7-black-screen-before-logo.836275/
Relevancy 76.11%

Hello! So recently I've been dealing with a lot of malware/trojans on my laptop, in any case after a scan/cleaning with adwcleaner and a restart the computer no longer boots, it sits up to the windows boot logo and afterwards is only a black screen (with movable cursor) 
So far I've attempted to run all versions of Safemode, same result. 
ANY help would be greatly appreciated, I do have sensitive information on the HDD so formatting isn't really an option I'd like to explore at this point in time.
Thank you

A:Infinite black screen after Windows logo

Try to boot a Live Linux distro from a flashdrive or CD. If successful, that would definitely indicate HDD problems. You should also be able to retrieve your "sensitive information" from that drive before re-formatting.

http://www.bleepingcomputer.com/forums/t/545270/infinite-black-screen-after-windows-logo/
Relevancy 75.25%

I turn on my laptop and the dell logo pops up and it just goes to a black screen with only my cursor being visible The other day it was working just fine then later on the fan starts getting really loud and I turn it off and turn it back on This is when my nightmare starts I turn it back on and stays on the dell logo and says quot diagnosing your pc quot The fan is still running Inspiron Cursor With 11 3000 Only problems Intel Black Help] w/ series Screen other [Please loud then after a few hours trying to get it work the fan just stops making noise altogether I run the system diagnostics and it says my fan and hard drive won t respond I open up my laptop to what s internally wrong with the fan and hard drive All I see is the fan doesn t spin but after several minutes it starts to I don t [Please Help] Intel Inspiron 11 3000 series Black Screen With Only Cursor w/ other problems see why it says my hard drive won t respond when I fully inspected it and there was no [Please Help] Intel Inspiron 11 3000 series Black Screen With Only Cursor w/ other problems visible damage whatsoever I put everything back together and keep trying and which it being in the current result that is stated in the beginning Only thing not mentioned is that the fan is just struggling to spin at a constant rpm In the diagnostics even though the fan is somewhat spinning it still indicates the fan and hard drive are unresponsive This the worst thing for me right now because I m looking for a job and start college soon

http://en.community.dell.com/support-forums/laptop/f/3518/t/19995325
Relevancy 75.25%

Hi I have a couple and Screen left-click after Black Windows Logo no W7: of problems with my Thinkpad T I hope I'm in the right section When I start Windows the screen just goes blank after the W7: Black Screen after Windows Logo and no left-click animated Windows logo when the login-screen should normally be appearing The hdd light keeps flashing but nothing happens no matter W7: Black Screen after Windows Logo and no left-click how long I wait Furthermore when I start Windows in Safe Mode the left-click isn't working with trackpoint and touchpad It is however working when I use a usb mouse Now before this happened I had installed a freeware grooveshark downloader which installed a bunch of adware along with it which I removed with malwarebytes and avast browser clean-up I noticed that the volume control buttons didn't work correctly all three were only muting and unmuting instead of in- or decreasing volume Also even before all this the on-screen prompots weren't appearing whenever I changed volume or screen brightness The last thing I did was install Windows-Update which might have involved Lenovo UltraNav and Display drivers not entirely sure I don't really know what to do now I'm doing a full malwarebytes-scan in safe mode now - nothing found yet What can I do Thanks

A:W7: Black Screen after Windows Logo and no left-click

Okay, good news: The laptop has switchable graphics and I always have the graphics card disabled because I don't need it and use the integrated Intel. I activated the ATI card in safe mode and now I can start Windows normally. However it won't let me switch graphics anymore so there seems to be something wrong with the integrated Intel which is weird since the CPU is working fine.
Also the sound button issue (all three (un)muting) still exists and left-click with touchpad or ultranav still doesn't work... Any ideas?

http://www.sevenforums.com/general-discussion/307360-w7-black-screen-after-windows-logo-no-left-click.html
Relevancy 75.25%

Hey, I was doing some maintenance to my computer (updating drivers) and as per my routine, I used driver sweeper to remove my AMD display driver to install the latest version. After the reboot when the display driver was removed, the windows logo loads normally and after that it goes into black screen. I've since tried all the other options - safe mode, repair, last known good config and I'll go to a black screen everytime past the windows logo/load bar.

I'm at at total lost on what to do, any help would be greatly appreciated.

A:HELP! Black screen after loading past windows logo

Ugh looks like it has something to do with my monitor just blacking out after being Not Optimum Mode for a minute, got it fixed

http://www.sevenforums.com/graphic-cards/240037-help-black-screen-after-loading-past-windows-logo.html
Relevancy 75.25%

I left my computer on over night on sunday, when i checked my computer late monday evening it just had a blank black screen on it. I rebooted the computer and it loads all the way to the winXP logo and then it displays this blank black screen with nothing on it. no sound no nothing. I tried starting "the last known good configuration" and the same thing occurs... i can start the computer in all 3 safe modes, but no other option works. i have no idea what to do. i didn't install any new software or hardware. any ideas?
 

A:blank black screen after windows logo on startup

Boot to safe mode, set your display for a generic vga, low resolution. Restart in standard mode, see if you get display. If so, start then, select correct display driver and try, step by step, to get back to where you were. If, somewhere along the line, you get the blank screen again, you should have an idea what happend.
 

https://forums.techguy.org/threads/blank-black-screen-after-windows-logo-on-startup.561347/
Relevancy 75.25%

I just drivewashed my s-ata wd harddrive 3 passes,and got to installing the controllers to the harddrive s-ata which was fasttrak100 lite windows xp driver and the promist fasttrak etc.. controller,it goes on to say install windows xp professional when i have the disk already in there...the whole windows installation reaches partitioning the hard drive,then it asks one more time for the hard drive controller driver off the floppy,so i insert that it installs more....then it says "computer will now restart,take floppy out"...but when the computer restarts this time,it goes into the normal windows loading black screen with the blue dots moving left to right at the bottom center,then suddenly it just freezes..ive tried reinstalling windows but i have no clue whats going on.
 

A:Windows XP Freezes at black logo loading screen!:(

What mobo are you using?
 

http://www.techspot.com/community/topics/windows-xp-freezes-at-black-logo-loading-screen.42039/
Relevancy 75.25%

Since I moved my pc to a LAN-party it takes dozens of time to get the computer starting without a boot loop.

When it starts my pc screen goes on standby after the windows loading screen while Safe-mode works perfect.

Could it be hardware related? because I might have been staticly charged at the LAN-party since I felt electricity everytime I touched the metal of the case.

EDIT

my thoughts: 2 problems.
1. Bad power connection leading to boot loops (the orange light next to the power light doesn't work with boot loops)
2. Videocard issue leading to black screens and BSOD (atihmpag.sys) --> reinstalled the video card and it seems to work for now.
 

A:Boot loop and black screen after windows logo

If it can load into Safe Mode usually this means a driver issue.

Second, you should in no way be feeling anything electric through your case! Is the motherboard touching the case at all? Check the back. The standoffs should prevent this. Is somthing touching the motherboard?
 

http://www.techspot.com/community/topics/boot-loop-and-black-screen-after-windows-logo.147753/
Relevancy 75.25%

Here is the full story feel free to skip if you don't think it's necessary So my dad and I found a computer at a garage with Screen Windows mouse after responsive Logo Black sale that had a TB HDD and a better processor than our current one in our family Black Screen after Windows Logo with responsive mouse computer so we decided to get it and move our HDD to its motherboard and I install the TB HDD into Black Screen after Windows Logo with responsive mouse my computer So after we put the quot new quot computer together with pieces of our quot old quot one I make a USB version of a windows repair disk so that the OS will be able to update itself to the new hardware But for whatever reason this doesn't work and the OS doesn't want to boot it would keep freezing during the startup animation for the Windows Logo Anyways we mess around with it for a bit and decide we might as well just put our old computer back together So we do so and put all the parts in correctly etc etc So this is where the problem starts Now when we try to boot up the computer we see the full quot Starting Windows quot animation however it remains up there for WAY longer than usual at least a few minutes eventually it goes away and we are greeted with a black screen with a movable mouse and nothing else We tried waiting a few hours but that changes nothing I then tried booting into safe mode but I still couldn't get in I then went to the quot Repair quot section by pressing F before the computer booted and ran the first option I forget what it was called but it was something along the lines of a quot startup-analyzer quot that would find and remove and problems that happened during startup however that reported that there were no problems during startup and that everything was perfectly fine I then tried to restore from an earlier point however that just gave me the message that the restoration failed I then ran the memory diagnostics check and it showed that the ram was perfectly fine So then I opened up the terminal and found and went to the correct partition and ran chkdsk with the options f r That took a few hours however it claimed that there were bytes of data in corrupted sections and that everything was fine So now I'm left with a confusing problem Everything looks quot ok quot with the hardware as far as I'm aware and we attempted to not damage anything during the process of switching different computers so why isn't the operating system starting Does anyone have any ideas or fixes

A:Black Screen after Windows Logo with responsive mouse

Welcome to the forums, Magnus.

It's probably a driver remnant left over from installing the drive in the old (new) computer. When you moved the drive to that computer and attempted to boot with it a flag probably got set somehow, and now you have to find a way to get it right before the machine will boot.

Try this tutorial and see if it helps:

Make Windows 7 bootable after motherboard swap

And this one:

Troubleshooting Windows 7 Failure to Boot

http://www.sevenforums.com/performance-maintenance/376676-black-screen-after-windows-logo-responsive-mouse.html
Relevancy 75.25%

I have got a major problems with my Acer Aspire g laptop with both black BSOD logo looping screen windows and with windows bit and some of the software bit I cannot log in at all in to Windows in any way no f buttons is functioing no advanced BSOD and black screen looping with windows logo alternatives are in function any of them some BSOD and black screen looping with windows logo dvd's starts yet yet so slowly so anything happens other times it will be black screen BSOD and black screen looping with windows logo only with text wait until downloading for hours Or a windows blue screen without any login possibilities and the screen hungs up or is locked Every possible alternative way to start boot or repair or reinstalations are out of function So I have no ideas anymore to try to log in to windows bit and try to reinstall clean installation or repair But laptop is is looping between these screens BSOD and black screen with text wait or windows screen without login or windows logo and thats all then everything is frozen Now I would like to know if there is any hope to this laptop and software in it or what should I do I have burned at least different dvd's for possible solutions anything had helped Can you give me some advice what to do please THANKS and Looking forward to get your answer soon I hope

A:BSOD and black screen looping with windows logo

Hi and welcome to TSF please remove all power including the battery then hold down the power button for 30 to 45 seconds then plug in the ac adapter and try booting

http://www.techsupportforum.com/forums/f217/bsod-and-black-screen-looping-with-windows-logo-693597.html
Relevancy 75.25%

Since I moved my pc to a LAN-party it takes dozens of time to get the computer starting without a boot loop.

When it starts my pc screen goes on standby after the windows loading screen while Safe-mode works perfect.

Could it be hardware related? because I might have been staticly charged at the LAN-party since I felt electricity everytime I touched the metal of the case.

A:Boot loop and black screen after windows logo

It could be hardware related, so we can run some tests. I'm wondering why safe mode works fine.

First off, are you really using XP, or are you using Vista/7?

The first thing I would do is open up the case and check your connections. Pull out the RAM and seat it firmly, make sure the hard drive power and SATA cables are in tight.

Any cable you see, make sure it's in securely.

http://www.techsupportforum.com/forums/f217/boot-loop-and-black-screen-after-windows-logo-486202.html
Relevancy 75.25%

So I had a few problems with my pc leading up to this When i played black after Windows shows logo Monitor screen a game my monitor would turn off Monitor shows black screen after Windows logo but my pc would stay on meaning i would have to force shutdown hold down the power button in order to turn it back on I recently cleaned my pc by removing dust from the gpu heatsink and fans plus I reapplied thermal paste to the gpu Things were working out fine for about a day until the problem happened again I guess i kept force shutting down since i really want to play and sometimes manage to get a game or two in to the point where my pc wont even start after the Windows logo shows up when booting up I need urgent help If anything helps my Graphics card is an nvidia geforce gt and usually hits c when gaming Yes its bad i get it but i need this back to work before my parents find out Tl dr - It shows a black screen with a white bar at the top after the windows logo shows loads up

A:Monitor shows black screen after Windows logo

Here's a video link to my problem click here

http://www.pcadvisor.co.uk/forum/windows-29/monitor-shows-black-screen-after-windows-logo-4597731/
Relevancy 75.25%

Hi everyone As the title suggests I'm getting a black screen after the windows logo appears At first there's no cursor but if I put the computer to Screen mode no after Black logo, Windows safe 8.1 sleep and turn it back on I get a cursor when it wakes up--still a Windows 8.1 Black Screen after logo, no safe mode black screen though Here are my specs CPU AMD Hexacore TRAM GB GSkills RipjawsMB Gigabyte GA- LMT USB GPU MB Integrated Radeon SeriesUnbootable Windows 8.1 Black Screen after logo, no safe mode HD Seagate TB Barracuda Windows Bootable HD year-old GB Hitachi Windows Here's how it went down I was watching HBOGo on Chrome then went to Windows 8.1 Black Screen after logo, no safe mode the Netflix Windows app don't judge my lethargic chain of events However Netflix immediately closed and wouldn't start I figured it was something with the graphics so I restarted my computer After the restart for some reason it ran Chkdsk on my other HD After running that it went through my normal startup and blacked out after the logo I ran a bootlog and found that dxgkrnl sys loads once then attempts to load another times and fails each time Other than that everything loads correctly Then I deleted some AMD stuff perhaps stupidly and I get more errors in the bootlog from AMD stuff I'd like to just clear all the AMD stuff and just have the bare Windows drivers load Here's what I've tried I've tried startup repair which attempts some fixes but fails I tried to enter Safe-mode and low graphics mode the computer simply launches into Automatic Startup Repair and fails after the Diagnosing PC dialogue Reset my BIOS removed CMOS battery I've let the computer sit on the black screen for hours to see if it was just hanging for a long time a lot of others have reported a temporary hang with the dxgkrnl sys error I've tried booting from a thumb drive with Windows on it so I can try to fix whatever is wrong Chkdsk and Seagate Seatools the hard drive is fine Nothing worksI really don't want to refresh my computer because I produce music and run statistical programming on my computer so countless programs will have to be reinstalled along with a myriad of settings that are not fun to set up However I do have another HD with Windows in my computer which I'm currently using Does anyone have any ideas on how I can possibly repair the graphics drivers from another HD I can access my unbootable HD and files from the current drive Is there anything I can do from this side of the windowpane Also does anyone have thoughts on how to get to safe mode or replace safe mode files Does anyone think I can just copy and paste my drivers and driverstore folders from my D drive to my currently innoperable C drive The hard drives are different but other than that everything else should be the same right Here's my most recent ntbtlog BOOTLOG LOADED SystemRoot system ntoskrnl exe BOOTLOG LOADED SystemRoot system hal dll BOOTLOG LOADED SystemRoot system kd dll BOOTLOG LOADED SystemRoot system mcupdate AuthenticAMD dll BOOTLOG LOADED SystemRoot System drivers werkernel sys BOOTLOG LOADED SystemRoot System drivers CLFS SYS BOOTLOG LOADED SystemRoot System drivers tm sys BOOTLOG LOADED SystemRoot system PSHED dll BOOTLOG LOADED SystemRoot system BOOTVID dll BOOTLOG LOADED SystemRoot system CI dll BOOTLOG LOADED SystemRoot System drivers msrpc sys BOOTLOG LOADED SystemRoot system drivers Wdf sys BOOTLOG LOADED SystemRoot system drivers WDFLDR SYS BOOTLOG LOADED SystemRoot System Drivers acpiex sys BOOTLOG LOADED SystemRoot System Drivers WppRecorder sys BOOTLOG LOADED SystemRoot System drivers ACPI sys BOOTLOG LOADED SystemRoot System drivers WMILIB SYS BOOTLOG LOADED SystemRoot System Drivers cng sys BOOTLOG LOADED SystemRoot System drivers msisadrv sys BOOTLOG LOADED SystemRoot System drivers pci sys BOOTLOG LOADED SystemRoot System drivers isapnp sys BOOTLOG LOADED SystemRoot System drivers vdrvroot sys BOOTLOG LOADED SystemRoot system drivers pdc sys BOOTLOG LOADED SystemRoo... Read more

http://www.bleepingcomputer.com/forums/t/562451/windows-81-black-screen-after-logo-no-safe-mode/
Relevancy 75.25%

When booting, my windows 8.1 is slow to do load. After windows logo, it goes to a black screen for around 10 secs, then it finally logs into the Start menu. I know this is not normal becasue I have seen the system boot faster in the past, but I don't know why its doing it now.

I have done a fresh install of windows 8 and update to 8.1.
I made to to have Fast Boot enabled
I have haswell, so I made to update to the latest graphics drivers by Intel
On a second note: I am triple booting: osx/linux/win with Chamelon boot loader. However, I doubt its an issue with triple boot because the black screen occurs AFTER windows logo, meaning windows has successfully loaded

A:Slow Boot Black Screen After Windows Logo

Hello Tcabin01,

Does your computer bios currently load in EUFI mode?

if so have you tried running in legacy? how to:

BIOS Mode - See if Windows Boot in UEFI or Legacy Mode

Hope that helps!

Cheers,
Harry

http://www.eightforums.com/general-support/43396-slow-boot-black-screen-after-windows-logo.html
Relevancy 74.39%

Hi...I have a compaq 5108US, windows xp pro.. recently installed a new hard drive, which worked fine for a few months. now when I try to turn on the computer, all I get is a black screen, with the compaq logo, and an immediate blinking cursor in the upper right hand corner. Tabbing f8 etc does not bring me to the safe mode option screen. I had the same problem a few months ago, of which I ended up having a new hard drive installed and that solved the problem. I wouldnt think a new hard drive would go bad that quick (if this is the problem this time). No beeps.. I also installed a new memory board, and it reads 504 memory ok, 164 memory size error, in addition to the black screen, compaq logo and blinking cursor. Any suggestions would be greatly appreciated! Thanks!!
 

Relevancy 74.39%

HI everyone I am a noob here so firstly can I say thanks in advance for any help you can give me on a frustrating problem I also hope this is able Windows waits Screen to Logo then after 2 login - minutes, Black in the right place as it's not Blue screen it's a black screen My System - custom build Intel Core i GHz DDR SDRAM Windows x Ultimate FOXCONN Motherboard H M-S and Nvidia GeForce GTX So I noticed a few days ago all of a sudden my PC started to get a black screen after the Windows loading animation However after about minutes it does eventually take me to the login screen Black Screen after Windows Logo - waits 2 minutes, then able to login where I can get access and everything appears to be in order Black Screen after Windows Logo - waits 2 minutes, then able to login I have tried this in Safe Mode and the same thing happens I have followed some of the hints on this forum about running tools and so far I have the following but these have not been run in safe mode AVAST - no issues SPYBOT - no issues MALWARE BYTES - no issues SFC SCANNOW - no issues DISABLED Graphics card - no change after reboot UNINSTALLED graphics card - no change REMOVED USB Hub - no change after reboot DISCONNECTED Network cable and rebooted - no change I am wired LAN not wireless I thought the network may be timing out Ran a boot Log and found Did not load driver SystemRoot System drivers vga sys Did not load driver SystemRoot System DRIVERS srv sys Did not load driver SystemRoot System Drivers NDProxy SYS Did not load driver SystemRoot System Drivers NDProxy SYS Did not load driver SystemRoot System Drivers NDProxy SYS Did not load driver SystemRoot System Drivers NDProxy SYS I have also used Soluto to see what the boot times were and only two programs were taking a long time to boot so I removed it from the start up process which were Spotify and NVIDIA Experience centre It made no difference Additionally I noticed on some occasions the machine boots and after the black screen the display seems to be at very low resolution some very funny colours and also displaying at x I hope someone on here can help - the only one thing I have not tried is a system restore as I am hesitant in getting something wrong Any help would be much appreciated Trying to give you as much info as I can Thanks Jon

A:Black Screen after Windows Logo - waits 2 minutes, then able to login

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/323142-black-screen-after-windows-logo-waits-2-minutes-then-able-login.html
Relevancy 74.39%

Hi folks Recently my pc starded giving me a time windows after black for long screen logo KSOD a - Black screen with interactive mouse pointer after the windows logo I think KSOD - black screen after windows logo for a long time the official term for this is KSOD blacK screen of Death this black screen stays on for at least - minutes before i get to the welcome screen Not sure why this is KSOD - black screen after windows logo for a long time happening I haven t updated anything or changed anything or added anything I was going through my NTBTLOG TXT and found out that my pc keeps trying to load some drivers and fails here are the names of a few of them - nettun inf netrasa inf nettun inf cpu inf oem inf I think this continuous attempt to load those drivers is causing the delay I am attaching my ntbtlog txt file to this post Also i got this BSOD last time logged into my KSOD - black screen after windows logo for a long time pc ----------------------------------------------------------------------------------------------------------------------------------------------------------------- Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode d BCP BCP BCP BCP FFFFF E E OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Sukhvir AppData Local Temp WER- - sysdata xml --------------------------------------------------------------------------------------------------------------------------------------------------------------- i have both those files if required Your help in resolving this will be highly appreciated thanks nbsp

A:KSOD - black screen after windows logo for a long time

sorry forgot to attach ntbtlog.txt .. here it is now
 

https://forums.techguy.org/threads/ksod-black-screen-after-windows-logo-for-a-long-time.1060230/
Relevancy 74.39%

Hey folks, I booted up my computer this morning and it wasn't looking so hot. Bios prompts appear, and goes into the typical Windows XP loading screen. Once it appears it's done loading, next should be the password login screen, but the monitor just sits blank. I'm almost positive that it's malware or a virus as I've seen something similar before.

I've attached a hijackthis log for your reference. I TRULY do appreciate any help in this matter. Thanks again, -Jeff
 

A:After loading windows xp logo, screen goes black... hijack included.

So I have a small update.

I logged into safe mode to try and do a system recovery from a few days ago and see if that works. It does it thing, but it doens't appear to work. On my next boot up, instead of loading windows, I get

"Windows could not start because of the following file is missing or corrupt:

\WINDOWS\SYSTEM32\CONFIG\SYSTEM"

So, it suggests that I try and repair using a copy of Windowx XP cd-rom. I boot that up, and sometimes it won't load saying there is an error, but every now and then it will get to the menu. I select repair, and it immediately states that I don't have any hard drives. I am using RAID, so I'm thinking that's the issue.

I remember that it asks if I have any third party drivers, and I do have some disks for the RAID drivers, however, my floppy is unplugged because when I left it in, it would just hang when I tried doing the repair setup. Unplugged that, and it loaded the repair menu. But now I can't install the raid drivers. Not sure if that would work anyway. Thoughts? Thanks again folks, I am seriously stuck here.

PS to mods, feel free to move my post if think you ness as it seems to be a slightly different issue then malware now. Thanks.
 

https://forums.techguy.org/threads/after-loading-windows-xp-logo-screen-goes-black-hijack-included.927260/
Relevancy 74.39%

Basics Dell Dimension desktop with G RAM running on XP home edition USB mouse keyboard amp printer connections Wired Ethernet connection Printer is an HP DeskJet D What happened I m fairly certain this reflects the order of the actions I took and the resulting problems but it s been a long few days There was an intermittent problem with the printer ie it was flashing lights and printed items would sit in black in Screen safe normal after modes & the goes logo Windows queue but never actually print The computer was also running VERY slow I Screen goes black after the Windows logo in normal & safe modes used the update feature in the HP software but it didn t resolve the problem I then used the Device Manager to look for better drivers without success so I deleted the printer from the printer window with the thought reinstalling would fix the issue however the PC locked up during the delete process due to the delete Soft restart wouldn t work so I hard booted the system When I restarted the system I got a blue screen in the boot process with a ialmrnt file issue which I researched and learned is a video problem After several re-attempts to start the PC in normal mode I booted to safe mode and used the restore feature going back to the last date in which system was working When I restarted the computer I got the same message so I restarted it to safe mode and disabled the video Screen goes black after the Windows logo in normal & safe modes driver hoping on restart it would find and fix the issue The computer then started to normal mode but in what looked like VGA ie big granular characters icons I tried to change the video settings from desktop gt properties without success wouldn t allow me to select anything I then tried to search for new drivers through the device manager without success finally I tried the system restore again but when it came back up from the re-boot the screen went black after the logo I now get this black screen regardless of if I select normal safe mode or any other option including the VGA mode though I still hear the sounds from the select a user screen so I believe it s a video driver issue I considered the recovery disc but in the repair mode it s looking for the administrator s password which is not administrator admin Dell I did try Help please

A:Screen goes black after the Windows logo in normal & safe modes

is the video card on board or a separate card also what are the specs of the card.

http://www.bleepingcomputer.com/forums/t/324662/screen-goes-black-after-the-windows-logo-in-normal-safe-modes/
Relevancy 74.39%

hi
this issue happened when i was just using my laptop to watch a movie. it just freezed some red lines were visible. then it restarted. n the red lines were there from vaio LOGO, BIOS settings. after windows logo the sreen goes black after abt 5 minutes i can hear the wndows sound. also i can log on to the computer by typing the password bt the screen is black. it sounds like its working.
so i used safe mode. in safe mode i can log on to windows still the red lines are there. in normal windows loading the screen in blank.

can anyone help me in this. thanx for ur efforts

A:black screen after windows logo. (VAIO VGNFE95HS - Win7)

Plug in an external monitor if possible. If the red lines are visible on that too, it rules out your laptop screen being faulty and is therefore likely to be a faulty GPU (Graphics Processing Unit) inside the laptop.

http://www.techsupportforum.com/forums/f217/black-screen-after-windows-logo-vaio-vgnfe95hs-win7-673720.html
Relevancy 74.39%

Hopefully someone can help me please Here is the detail I think it started after I download Mp tag freeware from cnet - First my computer restarted without any notice - Win7 virus? screen, MBR no windows black logo, boot, Won?t Firefox closed on me a few times - The computer would slow down from time to time - I didn t think anything was wrong and I shut the laptop down but it was stuck on the blue windows background screen with the words shutting down and the loading cursor donut After about min on this screen I help the power Win7 Won?t boot, black screen, no windows logo, MBR virus? button down and forced it to shut down - The next day I log in and Firefox was going slow and I got a little action center pop-up from windows you computer is infected when I tried to Win7 Won?t boot, black screen, no windows logo, MBR virus? click on the bubble the computer crushed with the blue screen Win7 Won?t boot, black screen, no windows logo, MBR virus? dumping physical memory - I log in again and I run rkill and I got a something like svchost exe I saved the notpad and tired to run malwarebites and I got the blue screen aging with dumping physical memory - It restarted and it ask me if I wanted to log into safe mode I got in and I was able run malwarebites it started scanning and half way through I had to stop and shut the laptop down - I tried to restart aging and now I get the acer logo with press F and press F than it goes to a black screen with the blinking underscore on the top left corner - F works and I can pick the boot order F works and I can get in and see the bule screen with the boot HDD info and everything - Other than F and F I can t do anything F or F don t work everything I try and I end up back at the black screen Please help me I have my wedding pictures music and other things I need on it I don t have a win cd and or restore cd My laptop is an Acer Aspire with windows bit it s about year old so I can t even contact Acer for support Please help If you need any other information please let me know Thank you in advance for your help

A:Win7 Wont boot, black screen, no windows logo, MBR virus?

Ive reported to people who deal with this type of thing.

http://www.bleepingcomputer.com/forums/t/437153/win7-wont-boot-black-screen-no-windows-logo-mbr-virus/
Relevancy 74.39%

Hey Windows Black Mode at XP Hanging Logo Safe Screen - everyone Sorry if I'm Hanging at Windows XP Logo Screen - Black Safe Mode posting in the wrong place - not sure what exactly is wrong So my computer was working - I was playing a game when the system just froze up I manually restarted and once I got to the Windows XP logo screen where the blue dots go running across in that little bar underneath the computer just stayed on that screen no matter how long I waited I've restarted several times and still keep getting stuck on that screen I tried going into safe mode to see if I could maybe do a system restore or just look to see if I could figure out what's wrong but all I get is a black screen with safe mode in all four corners of the screen and my mouse cursor Same thing when I try to go into VGA mode I'm wondering if my video card died The computer runs fine if I'm just doing normal things like watching a movie or just surfing the Internet However I'll play a game and often times it'll do the freeze-up thing and I'll have to restart But every time that has happened the computer started back up normally - until now Any help would be appreciated Thanks so much

A:Hanging at Windows XP Logo Screen - Black Safe Mode

Do a WinXP Repair install. It repairs critical files and does not erase personal data. Go here ... http://michaelstevenstech.com/XPrepairinstall.htm .

http://www.bleepingcomputer.com/forums/t/554026/hanging-at-windows-xp-logo-screen-black-safe-mode/
Relevancy 74.39%

On the Monday July 26th i was hit with a virus bomb with 4 types of rogue software, a bunch of trojan and including a smitfraud-c. I got rid of these viruses, but I accidently wiped a section that i supposed to not touch. Apon rebooting my system i get a dell bios loading screen then just black.

I tried to go to safe mode it shows the files loading, but it won't go to the windows screen. I have a installation cd for windows but some of the files won't load properly. i tried making a CD-RW copy on my reinstallation for windows, but my disk won't read 4 files.

A:dell bios load then black screen no windows logo

and welcome to the Forum

If a repair install did not help, probably your best bet is a clean install. You can take the drive out to salvage any data you cherish that is not backed up.

You can get a reinstallation guide specific to your Dell here
http://support.dell.com/support/topi...n&s=dhs&~ck=mn

http://www.techsupportforum.com/forums/f10/dell-bios-load-then-black-screen-no-windows-logo-501238.html
Relevancy 74.39%

Ok this is what happened there was some error message whenever I was restarting my PC Next thing I know is it boots up goes past the Win XP logo and its a black screen and nothing else Go into recovery console and did this as described Part One In part one you start the Recovery Console create a temporary folder back up the existing registry files to a new location delete the registry Windows XP System Screen after logo a and Black had error lsass.exe files at their existing location and then copy the registry files from the repair folder to the System Config folder When you have finished this procedure a registry is created that you can use to start Windows XP This registry was created and saved during the initial setup of Windows XP Therefore any changes and settings that occurred after the Setup program was finished are lost To complete part one follow these steps Insert the Windows XP startup disk into the floppy disk drive or insert the Windows XP CD-ROM into the Black Screen after Windows XP logo and had a System error lsass.exe CD-ROM drive and then restart the computer Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so When the quot Welcome to Setup quot screen appears press R to start the Recovery Console If you have a dual-boot or multiple-boot computer select the installation that you want to access from the Black Screen after Windows XP logo and had a System error lsass.exe Recovery Console When you are prompted to do so type the Administrator password If the administrator password is blank just press ENTER At the Recovery Console command prompt type the following lines pressing ENTER after you type each line md tmp copy c windows system config system c windows tmp system bak copy c windows system config software c windows tmp software bak copy c windows system config sam c windows tmp sam bak copy c windows system config security c windows tmp security bak copy c windows system config default c windows tmp default bak delete c windows system config system delete c windows system config software delete c windows system config sam delete c windows system config security delete c windows system config default copy c windows repair system c windows system config system copy c windows repair software c windows system config software copy c windows repair sam c windows system config sam copy c windows repair security c windows system config security copy c windows repair default c windows system config default in the process of doing this restarted Next thing I know I get this error message System error lsass exe When trying to update a password the return status indicates that the value provided as the current password is not correct When trying to log into recovery console now I have a password on it and I dont know it HELP nbsp

Relevancy 74.39%

I m having a problem with my Dell Dimension running Windows XP I have an g Maxtor HD as my main drive and a g WD secondary drive When I attempt to boot I get a blue screen with the message A problem has been detected and Windows has been shut down to prevent damage to your computer If this is he first time you ve seen this Stop error screen restart your computer If this screen appears again Screen Can't Black Blue (Standard Screen w/cursor Mode), boot then XP Windows Safe or follow these steps Check to be sure you have adequate disk space If a driver is identified in the Stop message disable the driver or check with the manufacturer for driver updates Try changing video adapters Check with your Can't boot Windows XP (Standard or Safe Mode), Black Screen w/cursor then Blue Screen hardware vendorm for any BIOS updates Can't boot Windows XP (Standard or Safe Mode), Black Screen w/cursor then Blue Screen Disable BIOS memory options such as caching or shadowing If you need to use Safe Mode to remove or disable components restart your computer press F to select Advanced Startup Options and then select Can't boot Windows XP (Standard or Safe Mode), Black Screen w/cursor then Blue Screen Safe Mode Technical Information STOP x E xC xF BB B xF E AO xF E AO FLTMGR SYS - Address F BB B base at F A DateStamp daAs far as the info in the message I see this screen with the same info everytime I rebooted As far as disk space my main drive is g aand I have about g of free space I m not sure if anything in the message refers to drivers Not sure how to change video adapters when I can t get into Windows Standard Mode or Safe Mode Also not sure how to deal with any of the BIOS suggestions or even know if it s a good idea to mess with it Again I cannot even boot to Safe Mode It takes me to the same Blue Screen message I have been able to boot from the CD I get to the Windows Setup screen it loads files It then says it s Starting Windows then takes me to the Windows XP Home Edition Setup It gives me the choices To set up Window XP now press Enter To repair a Windows XP installation using Recovery Console press R To quit Setup without installing Windows XP press F I pressed R and in the Recovery Console it shows C WINDOWSI press as this is the only Windows installation I have It then takes me to the Command Prompt C WINDOWS gt I have run CHKDSK and got this message The volume appears to be in good condition and was not checked Use p if you want to check the volume anyway kb total disk space kb are available bytes in each allocation unit total allocation units on disk allocation units available on disk I have also run CHKDSK r and it found and fixed one or more errors After I exited and tried to reboot from the HD and got the same BSOD with same message I don t know if this is a virus or hardware software problem I do have Malwarebytes Anti-Virus and Norton on the PC but without Windows XP I m not sure how to run them I have also booted from Hirems Boot CD and have run all the hardware tests checked HDs memory video etc I could and have found no problems Any light you could shed on this would be greatly appreciated Thanks in advance Dave

A:Can't boot Windows XP (Standard or Safe Mode), Black Screen w/cursor then Blue Screen

mod bump

http://www.bleepingcomputer.com/forums/t/385215/cant-boot-windows-xp-standard-or-safe-mode-black-screen-wcursor-then-blue-screen/
Relevancy 73.96%

Whenever the Windows loadscreen load Black after - it fixes Windows screen Nothing w/cursor screen passes the screen goes black and I can move a cursor around the screen I have had this happen before and fixed it with bootrec exe but I can't seem to get that to work this time Startup repair says it cannot help - Safe mode Black screen w/cursor after Windows load screen - Nothing fixes it has the exact same Black screen w/cursor after Windows load screen - Nothing fixes it black screen problem I have done chkdsk and sfc scannow - Didn't fix it When I Black screen w/cursor after Windows load screen - Nothing fixes it boot into Kaspersky Rescue from a USB drive it mentions that I need to shut down windows properly before continuing I would like to do this but I can't I have tried changing the active partition on information in some of these other threads - It didn't seem to work All disks are healthy according to the DISKPART and Partition Wizard I have done the HP hardware diagnostic scans and everything comes up fine I see that a lot of the advice on the threads is to do a fresh install - Is it really broken beyond repair at this point Does anyone have any other ways I can try and fix this problem

A:Black screen w/cursor after Windows load screen - Nothing fixes it

Hello saturnn and welcome to Seven Forums.

One of the Forum experts prepared this troubleshooting guide for Windows 7 failure to boot issues. Even though you've tried several of the suggested fixes I'd still go through the tutorial and try the steps in the order listed.

Troubleshooting Windows 7 Failure to Boot

http://www.sevenforums.com/general-discussion/268184-black-screen-w-cursor-after-windows-load-screen-nothing-fixes.html
Relevancy 73.96%

I tried already removing the battery and press the power button. Then connect the plug. Start the computer. Nothing happened.
Pressing f8,f2 and other f. But nothing happened.
I don't know how to fix it.
Can you please help me with this. Thank you so much

A:Inspiron 17 5000 series after dell logo loading the windows 10 didn't open. It stays at blank screen with only the cursor moving.

Great News! I'm glad your computer is working again. 

http://en.community.dell.com/support-forums/software-os/f/4677/t/19658039
Relevancy 73.53%

Hello I am goes after logo laptop during Acer black windows 7520 screen boot working on an Acer laptop that boots Acer 7520 laptop screen goes black after windows logo during boot normally except for the screen going blank after the windows loading logo in Windows It does the same when booting to a Windows install disc It gets past the initial screen when copying files and then goes blank When connected to a second monitor the monitor shows quot video out of range quot I tried booting to safe mode and vga mode with no luck on both monitors The system loads into windows desktop as I can hear the sounds and I can power down using the start menu blindly The display works fine in the system BIOS and during the initial boot from disc or hard drive I am thinking the internal video card is bad but want to explore other options before giving up So far I have Tested all hardware Cloned a drive from another machine with a good OS Tried both the original Windows Vista OS and a new copy of Windows from both CD and hard drive Booted to VGA mode and safe mode Reset BIOS to defaults Please help me get this stubborn laptop to boot normally nbsp

Relevancy 73.53%

Hi i m axl and i m quite desperate about the actual situation of my only windows installation i hope that someone here can help understand the problem because i ve been working hours trying almost every with lower Ultimate black 7 Windows Boot logo with screen freeze single fix with every single combination i could find on internet pc specs notebook hp pavillion dv entertainment no battery using o s specs windows ultimate edition x last operating scenario i was happily Boot freeze with black screen with lower Windows 7 Ultimate logo using windows everything worked perfectly my utorrent open and watching a film in streaming then i had the brilliant idea to try to install this shit software Windows Theme Installer Install Apply Delete Themes Easily - door windows to try change windows appereance i run it and it showed up some errors so i quit it before it would complete the installation closed utorrent and rebooted boom i got this shit screen without the possibility to do ANYTHING i can t open the task manager i can t send the computer in sleep mode the only buttons showing are the red one for shutdown and the handicap s one the only thing that s moving is the mouse pointer over the black screen and logo if someone could maybe know what files that shit theme installer changes i could try to reset them but i-ve also tried this a little searching in the registry for it s name shell and exploer exe seem to be working i tried everything from the windows repair and F mode i tried kaspersky recue disk i tried ubuntu linux things there s no error with the boot or the mbr windows boots normally and it just get stuck before the login loading module guaranteed there s no viruses or trojans as i run a scan with many antiviruses and antimalwares not so long ago i removed the theme pack i was trying to install but didn t help here is attached the ntbtlog

A:Boot freeze with black screen with lower Windows 7 Ultimate logo

i restored files and dll components that the shit-installer should have modified, except for this TwinUI.dll that i can`t find anymore in my windows system folder. i don`t know what that one is but windows is still stuck there exactly like before.

http://www.sevenforums.com/general-discussion/346147-boot-freeze-black-screen-lower-windows-7-ultimate-logo.html
Relevancy 73.53%

Hello I am working on an Acer laptop that boots screen boot Aspire logo Acer goes 7520 windows black during after normally except for the screen going blank after the windows loading logo in Windows It does the same when booting to a Windows install disc It gets past the initial screen Acer Aspire 7520 screen goes black after windows logo during boot when copying files and then goes blank When connected to a second monitor the monitor shows quot video out of range quot I tried booting to safe mode and vga mode with no luck on both monitors The system loads into windows desktop as I can hear the Windows sounds and I can power down using the start menu blindly The display works fine in the system BIOS and during the initial boot from disc or hard drive I am thinking the internal video card is bad but want to explore other options before giving up So far I have Tested all hardware Reset BIOS to defaults Booted to VGA mode and safe mode Tried Last Known Good Configuration Cloned a drive from another machine with a good OS Tried both the original Windows Vista OS and a new copy of Windows from both CD and hard drive Please help me get this stubborn laptop to output video normally

A:Acer Aspire 7520 screen goes black after windows logo during boot

Hi it sounds like the driver might not be loading or the graphics is failing

http://www.techsupportforum.com/forums/f217/acer-aspire-7520-screen-goes-black-after-windows-logo-during-boot-685827.html
Relevancy 73.53%

hello i have my screen cursor w/ Windows Black 7 friends laptop and the system boots normally but after few sec i see only black screen with Windows 7 Black screen w/ cursor cursor It is the same in all boot options it doesnt matter if i start system in safe mode or normal I already scanned system partition with malwarebytes software and it did find only one thingy Already tried to restore registry etc but it didnt help same as sfc scannow etc hdd is fine no bad sectors Few min ago i scanned it with frst If some can help me with this problem i would really appreciate that thx in advance ps sorry for my english Scan result of Farbar Recovery Scan Tool FRST x Version - - Ran by SYSTEM on MININT-I GCQAE on - - Running from G Platform Windows Home Premium X OS Language English United States Internet Explorer Version Boot Mode Recovery The current controlset is ControlSet ATTENTION gt If the system is bootable FRST must be run from normal or Safe mode to create a complete log Tutorial for Farbar Recovery Scan Tool http www geekstogo com forum topic -frst-tutorial-how-to-use-farbar-recovery-scan-tool Registry Whitelisted If an entry is included in the fixlist the registry item will be restored to default or removed The file will not be moved HKLM Run RtHDVCpl gt C Program Files Realtek Audio HDA RAVCpl exe - - Realtek Semiconductor HKLM Run RtHDVBg gt C Program Files Realtek Audio HDA RAVBg exe - - Realtek Semiconductor HKLM Run Apoint gt C Program Files Apoint Apoint exe - - Alps Electric Co Ltd HKLM-x Run IAStorIcon gt C Program Files x Intel Intel reg Rapid Storage Technology IAStorIcon exe - - Intel Corporation HKLM-x Run ISBMgr exe gt C Program Files x Sony ISB Utility ISBMgr exe - - Sony Corporation HKLM-x Run BEWINTERNET-PLSessionManager gt C Program Files x OrangeBS BEWInternet-PL SessionManager SessionManager exe HKLM-x Run StartCCC gt C Program Files x ATI Technologies ATI ACE Core-Static CLIStart exe - - Advanced Micro Devices Inc HKLM-x Run Adobe ARM gt C Program Files x Common Files Adobe ARM AdobeARM exe - - Adobe Systems Incorporated HKLM-x Run TkBellExe gt c program files x real realplayer Update realsched exe - - RealNetworks Inc HKLM-x Run mobilegeni daemon gt C Program Files x Mobogenie DaemonProcess exe HKLM-x Run AvastUI exe gt C Program Files AVAST Software Avast AvastUI exe - - Avast Software s r o Winlogon Notify igfxcui C Windows system igfxdev dll Intel Corporation HKLM Policies Explorer NoControlPanel Services Whitelisted If an entry is included in the fixlist it will be removed from the registry The file will not be moved unless listed separately S ACDaemon C Program Files x Common Files ArcSoft Connection Service Bin ACService exe - - ArcSoft Inc S avast Antivirus C Program Files AVAST Software Avast AvastSvc exe - - Avast Software s r o S CSHelper C Program Files Common Files ArtistScope CSHelper exe - - ArtistScope Pty Ltd S ESRV SVC C Program Files Sony VAIO Care ESRV esrv svc exe - - Intel Corporation S McComponentHostServiceSony C Program Files x Sony MSS McCHSvc exe - - McAfee Inc S RealNetworks Downloader Resolver Service C Program Files x RealNetworks RealDownloader rndlresolversvc exe - - S uCamMonitor C Program Files x ArcSoft Magic-i Visual Effects uCamMonitor exe - - ArcSoft Inc S USER ESRV SVC C Program Files Sony VAIO Care ESRV esrv svc exe - - Intel Corporation S VCFw C Program Files x Common Files Sony Shared VAIO Content Folder Watcher VCFw exe - - Sony Corporation S VUAgent C Program Files Sony VAIO Update vuagent exe - - Sony Corporation S WinDefend C Program Files Windows Defender mpsvc dll - - Microsoft Corporation Drivers Whitelisted If an entry is included in the fixlist it will be removed from the registry The file will not be moved unless listed separately S ArcSoftKsUFilter C Windows System DRIVERS ArcSoftKsUFilter sys - - ArcSoft Inc S aswHwid C Windows system drivers aswHwid sys - - S aswMonFlt C Windows system drivers aswMonFlt sys - - Avast Software s r o S aswRdr C Windows ... Read more

A:Windows 7 Black screen w/ cursor

Greetings lukey25 and to BleepingComputer's Virus/Trojan/Spyware/Malware Removal forum.My name is Oh My! and I am here to help you! Now that we are "friends" please call me Gary.If you would allow me to call you by your first name I would prefer to do that.===================================================Ground Rules:First, I would like to inform you that most of us here at Bleeping Computer offer our expert assistance out of the goodness of our hearts. Please try to match our commitment to you with your patience toward us. If this was easy we would never have met. Please do not run any tools or take any steps other than those I will provide for you while we work on your computer together. I need to be certain about the state of your computer in order to provide appropriate and effective steps for you to take. Most often "well intentioned" (and usually panic driven!) independent efforts can make things much worse for both of us. If at any point you would prefer to take your own steps please let me know, I will not be offended. I would be happy to focus on the many others who are waiting in line for assistance.Please perform all steps in the order they are listed in each set of instructions. Some steps may be a bit complicated. If things are not clear, be sure to stop and let me know. We need to work on this together with confidence.Please copy and paste all logs into your post unless directed otherwise. Please do not re-run any programs I suggest. If you encounter problems simply stop and tell me.When you post your reply, use the button instead.In the upper right hand corner of the topic you will see the button. Click on this then choose Immediate E-Mail notification and then Proceed and you will be sent an email once I have posted a response.If you do not reply to your topic after 5 days we assume it has been abandoned and I will close it.When your computer is clean I will alert you of such. I will also provide for you detailed information about how you can combat future infections.I would like to remind you to make no further changes to your computer unless I direct you to do so.Now let's get started ===================================================Now that I am assisting you, you can expect that I will be very responsive to your situation. If you are able, I would request you check this thread at least once per day so that we can try to resolve your issues effectively and efficiently. If you are going to be delayed please be considerate and post that information so that I know you are still with me. Unfortunately, there are many people waiting to be assisted and not enough of us at BleepingComputer to go around. I appreciate your understanding and diligence.Thank you for your patience thus far. Please run the following for me.===================================================Farbar's Recovery Scan Tool - Run Fix--------------------From a clean computer press the windows key + r on your keyboard at the same time. Type in notepad and press EnterPlease copy and paste the contents of the below code box into the open notepad and save it on the flashdrive as fixlist.txtS3 ewusbmbb; system32\DRIVERS\ewusbwwan.sys [X]
S3 ewusbnet; system32\DRIVERS\ewusbnet.sys [X]
S3 ew_hwusbdev; system32\DRIVERS\ew_hwusbdev.sys [X]
S3 ew_usbenumfilter; system32\DRIVERS\ew_usbenumfilter.sys [X]
S3 huawei_enumerator; system32\DRIVERS\ew_jubusenum.sys [X]
S3 hwdatacard; system32\DRIVERS\ewusbmdm.sys [X]
C:\Users\Alan\AppData\Local\Temp\bassmod.dll
C:\Users\Alan\AppData\Local\Temp\conduitcbi.exe
C:\Users\Alan\AppData\Local\Temp\CT2776682.exe
C:\Users\Alan\AppData\Local\Temp\EAD10B2.exe
C:\Users\Alan\AppData\Local\Temp\EAD1795.exe
C:\Users\Alan\AppData\Local\Temp\EAD1C4.exe
C:\Users\Alan\AppData\Local\Temp\EAD1CF2.exe
C:\Users\Alan\AppData\Local\Temp\EAD276D.exe
C:\Users\Alan\AppData\Local\Temp\EAD2970.exe
C:\Users\Alan\AppData\Local\Temp\EAD2DF2.exe
C:\Users\Alan\AppData\Local\Temp\EAD4E0.exe
C:\Users\Alan\AppData\Loc... Read more

http://www.bleepingcomputer.com/forums/t/579526/windows-7-black-screen-w-cursor/
Relevancy 73.53%

hi for some reason my dell inspiron 1525 screen went black with a moving cursor when i turned it on..i dont want to reinstall because i have alot of important data on it.the same thing happens in safe mode, ive tried system repair,system restore,system image recovery
and diagnostic..i tried to to run sfc /scannow
but it says "there is a system repair pending which requires reboot to complete. Restart Windows and run sfc again.

I've restarted multiple times still the same result occurs
can any one help!!!?

also here is my log file results if it helps

A:Windows 7 black screen with cursor

hi there
if you have run the sfc scan several times and it does not find any violations have you run a virus/mailware scan? check for updates for your drivers graphics card etc. also a bios update check. also could you fill your specs out please so the forum readers can assist you better

http://www.sevenforums.com/general-discussion/158711-windows-7-black-screen-cursor.html
Relevancy 73.53%

Hi,
 
I recently was directed to a site that I am pretty sure contained a virus, as after I restarted my computer, what normally would be my desktop is now a black screen with a cursor.
 
I have looked up what I am normally supposed to do when this problem occurs, so I installed FRST (64-bit), and ran a scan, the results of which I attached below. This was run in safe-mode with networking.
 
Thanks.

A:[Windows 7] Black Screen with Cursor

For now, never mind, please delete this post.

http://www.bleepingcomputer.com/forums/t/616185/windows-7-black-screen-with-cursor/
Relevancy 73.53%

While running windows a few weeks ago my computer started running slowly so I restarted it and it would go to the windows load bar than the next screen where its supposed to log onto my win it just sits at a black screen with a cursor I cannot ctrl-alt-del or anything I've tried system restore it says I have none and i know i did and i've tried the recovery consol for windows says and says it finds no problems Safe mode does the same to just sits at blank screen I found someone on here might have had a great solution for my problem and it might be being caused by a virus I am on a dual boot Win with xp I can get into xp and browse files on the drive windows is installed in Here is what someone suggested I do but i dont black screen 7 Windows no cursor Win know how Windows black screen no cursor Win 7 to use the security tab with xp or if I can do this with xp He wrote suggested Quote For those of you who are still struggling after some of the suggestions by other users I have stumbled upon a solution that fixed my issues I am a system administrator running xp visa Windows black screen no cursor Win 7 and win desktops one day my vista and win machines did the black screen and moving cursor thing Windows black screen no cursor Win 7 None of the cntrl alt dlt things quite worked for me so I investigated a hard drive that was affected by this virus malware by putting the hard drive into another machine that was working just perfectly The thing I have found was that this virus malware changes permissions and ownership in vista and win it takes ownership of system files which doesn t allow you to boot up your machine properly Windows xp reacts differently to the virus malware in win xp it affects your printing the start toolbar disappears and the best of all is it affects your ms office you get weird error messages when opening documents or it doesn t allow you to open any documents at all The way I fixed all of my machines whether it was XP vista or win was the following method Take the hard drive of the affected machine put it into another machine that is working perfectly make sure that the other machine has a decent antivirus on I used Mcafee because you have to do a full scan and after that you go to my computer and right click on the affected machine s hard drive go to properties and then the security tab Now I have seen that mostly it deletes a security group or user so you ll notice that where all the users and groups are listed usually there is a user which only consists out of a string of numbers long string which indicates that the user or group has been deleted All you have to do is take ownership of the drive restore all the default permissions to the drive and replace all the child objects with the ownership and permissions and you are good to go This is what the default permissions would look like Default permissions Administrators Full Control Creator Owner Full Control Everyone Change System Full Control Now go to advanced button at the bottom of the security tab this will give you permissions tab auditing owner etc Under the permissions tab add the default permissions so that it looks similar to the above example when finished make sure you tick the replace permission box at the bottom of the window this will apply all the permissions right down to all the files and folders and not only to the drive itself After you have ticked the checkbox click apply you ll see a small window applying permissions to files and folders this usually takes a while depends on the amount of data on your hard drive Once it is done go to the Owner s tab select administrator or administrators then check the replace permissions checkbox at the bottom of the window and press apply this will give a similar window when applying permissions to files and folders but this only takes ownership of files and folders Now once all of this is done put the hard drive back in the affected pc Once you start it up sometimes for some reason it asks you if ... Read more

A:Windows black screen no cursor Win 7

or any other help on how I can get back into my windows 7.

http://www.sevenforums.com/bsod-help-support/111567-windows-black-screen-no-cursor-win-7-a.html
Relevancy 73.53%

Help. I did a stupid thing. I was trying to install some software for an old iobit zip drive. It said I needed to reboot to finish and so I did. But then it gave me an error that said repairing. BUT I stupidly hit the reboot button, twice. Is my hard drive toast? Or do I have any prayer at all.

http://www.computerhope.com/forum/index.php/topic,158016.0.html
Relevancy 73.53%

Hi,

I recently got the malicious Antimalware Doctor virus, and after trying to delete it, my laptop is now stuck in an endless loop and is stuck on the screen just before login, with a black screen and a cursor.

This may have been said before, but my laptop is a HP 530 and my laptop DID NOT come with a recovery disc, therefore I have no backup.

I was wondering if this is possible to fix without a backup disc. NOTE: The files on my laptop are not important, therefore I don't care if my data is erased.
 

A:Windows Black Screen Cursor

Try tapping F11 while booting up, there should be a recovery option there.
 

https://forums.techguy.org/threads/windows-black-screen-cursor.937322/
Relevancy 73.53%

I've read a couple of posts but I need to explain myself that's why I created this post So my laptop isn't booting normaly I had this quot Critical Error quot on startup and cursor Windows 7 w/ Black Screen I did the repair with the cd It said that Windows 7 Black Screen w/ cursor everything was fine so I restarted my pc and I had this black screen with the moveable cursor in it I tried everything Ctrl Alt Del No response Safemode gives me that list when loading drivers but it freezes at disk sys I think its that one ill upload more info later after the froze gets back to the black screen w cursor and still no response from any command When my pc was good I had installed an update for the game quot Combat Arms quot with the repair process I can acess to the disk and delete search stuff I dont know if I should try to delete that game or any other possible infected file Please Idont want to lose anything from my HDD Ill upload more info tomorrow really hope you guys can help me every little help is important to me im just but I know a couple things about tech

A:Windows 7 Black Screen w/ cursor

Hey there, I'm not sure what's quite happening because I never experienced this problem. But, I would suggest repairing your computer to a earlier point of time, or completely renewing it by using the "System Repair" tool. How long have you had your computer, and was it used before you, or mom, etc. Brought it?

http://www.sevenforums.com/general-discussion/258868-windows-7-black-screen-w-cursor.html